SCS Introduces Bags and Film qualified to MIL-PRF-81705E Type III, Class 2
January 16, 2017 - SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. This product features the same quality standards and level of service you have come to trust and depend upon from SCS. Standard stock bags are converted per MIL-DT L-117H unless otherwise requested. If your packaging needs do not include meeting MIL-DTL-117H, bags can be converted from qualified film per your packaging requirements.
You will know you are receiving qualified film because the film is printed per MIL-PRF -81705E Section 3.6:
“MIL-PRF-81705E: 3.6 Identification of material. The barrier material shall have two groups of markings in block form and in machine direction. Group A marking shall state the specification number, type, class, manufacturer's name, manufacturer's designation, month and year of manufacture, lot number and heat sealing conditions (temperature, pressure and dwell time). The letters and figures shall be clear, legible, and shall be not les s than ⅛ inch high. Group B markings shall identify the protective qualities of the materials as follows: For type I – EMI/STATIC SH IELD and for type III – STATIC SHIELD. These letters shall be not less than ½ inch high. The two groups of mar kings on all three types of material shall be either printed using a water-resistant ink or embossed and shall be visible if the material is fabricated into a bag or pouch. The two groups of markings shall be printed or embossed sequentially, complete, and continuous lengthwise with a space of one inch between groups. A complete group of markings shall appear once in each six inches of width of the roll and flat cut.”
The SCS 81705 bags and film are made and stocked in our Sanford, NC facility.
Please contact Service@StaticControl.com for more information.
About SCS:
The product line was acquired by Desco Industries, Inc. in January 2015. SCS is a Static Control Solutions provider of ESD control products: Wrist Straps, Foot Grounders, Matting, Floor Tile, Smocks, Gloves, Ionizers, Shielding Bags, Testers & Continuous Moni tors, Tape, and Static Management Programs. SCS primarily manufactures Static Control Products in our Sanford, North Carolina facility.
For additional information email Service@StaticControl.com or visit StaticControl.com
Contact:
Alyssa Smith
781-821-8370
926 JR INDUSTRIAL DRIVE,
SANFORD, NC 27332
PHONE (919) 718-0000, (909) 627-9634
WEB: STATICCONTROL.COM
