Desco Industries, Inc.
926 JR Industrial Drive
Sanford, NC 27332
Share:
New Workstation Monitor from SCS Uses Dual-Wire Wrist Straps
Detects operator body voltage and will instantly alarm if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item. Designed with digital signal processing technology for true continuous monitoring of wrist strap functionality. Offers continuous monitoring of the path-to-ground integrity and body voltage of two operators, as well as the...
Read More »
New Workstation Monitor from SCS Uses Dual-Wire Wrist Straps
Detects operator body voltage and will instantly alarm if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item. Designed with digital signal processing technology for true continuous monitoring of wrist strap functionality. Offers continuous monitoring of the path-to-ground integrity and body voltage of two operators, as well as the...
Read More »
New 770718 Air Ionizer Test Kit from SCS Comes with Charger on Conductive Plate
Allows static sensor to measure the offset voltage and charge decay of ionization equipment. Can test offset voltage and discharge times of air ionizers and electrostatic fields. Includes ±1000V charger, plate and case.
Read More »
New 770718 Air Ionizer Test Kit from SCS Comes with Charger on Conductive Plate
Allows static sensor to measure the offset voltage and charge decay of ionization equipment. Can test offset voltage and discharge times of air ionizers and electrostatic fields. Includes ±1000V charger, plate and case.
Read More »
Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.
SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors. Worksurface...
Read More »
Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.
SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors. Worksurface...
Read More »Workstation Monitor is calibrated with standards of NIST.
Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.
Read More »Workstation Monitor is calibrated with standards of NIST.
Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.
Read More »SCS Introduces Bags and Film qualified to MIL-PRF-81705E Type III, Class 2
January 16, 2017 - SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. This product features the same quality standards and level of service you have come to trust and depend upon from SCS. Standard stock bags are converted per MIL-DT L-117H unless...
Read More »SCS Introduces Bags and Film qualified to MIL-PRF-81705E Type III, Class 2
January 16, 2017 - SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. This product features the same quality standards and level of service you have come to trust and depend upon from SCS. Standard stock bags are converted per MIL-DT L-117H unless...
Read More »
New Workstation Monitor from SCS Uses Dual-Wire Wrist Straps
Detects operator body voltage and will instantly alarm if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item. Designed with digital signal processing technology for true continuous monitoring of wrist strap functionality. Offers continuous monitoring of the path-to-ground integrity and body voltage of two operators, as well as the...
Read More »
New Workstation Monitor from SCS Uses Dual-Wire Wrist Straps
Detects operator body voltage and will instantly alarm if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item. Designed with digital signal processing technology for true continuous monitoring of wrist strap functionality. Offers continuous monitoring of the path-to-ground integrity and body voltage of two operators, as well as the...
Read More »
New 770718 Air Ionizer Test Kit from SCS Comes with Charger on Conductive Plate
Allows static sensor to measure the offset voltage and charge decay of ionization equipment. Can test offset voltage and discharge times of air ionizers and electrostatic fields. Includes ±1000V charger, plate and case.
Read More »
New 770718 Air Ionizer Test Kit from SCS Comes with Charger on Conductive Plate
Allows static sensor to measure the offset voltage and charge decay of ionization equipment. Can test offset voltage and discharge times of air ionizers and electrostatic fields. Includes ±1000V charger, plate and case.
Read More »
Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.
SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors. Worksurface...
Read More »
Dissipative Rubber Worksurface Mat meets ANSI/ESD S20.20 standards.
SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors. Worksurface...
Read More »Workstation Monitor is calibrated with standards of NIST.
Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.
Read More »Workstation Monitor is calibrated with standards of NIST.
Eliminating need for periodic testing, WSMONITOR2 Plus Workstation Monitor is designed for monitoring single-wire wrist strap system. Featuring switch for disabling mat monitor circuit when not needed, product comes with shielded enclosure to stop false pass conditions. Meeting ANSI/ESD S20.20 Continuous Monitor standards, monitor comes with 100-240VAC power adapter with interchangeable plugs.
Read More »SCS Introduces Bags and Film qualified to MIL-PRF-81705E Type III, Class 2
January 16, 2017 - SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. This product features the same quality standards and level of service you have come to trust and depend upon from SCS. Standard stock bags are converted per MIL-DT L-117H unless...
Read More »SCS Introduces Bags and Film qualified to MIL-PRF-81705E Type III, Class 2
January 16, 2017 - SCS now manufactures a series of bags and film which are qualified to MIL-PRF-81705E Type III, Class 2. These products are on the Qualified Product Listing under the Defense Standardization Program. This product features the same quality standards and level of service you have come to trust and depend upon from SCS. Standard stock bags are converted per MIL-DT L-117H unless...
Read More »