Power Modules have low profile of 12 mm.
Share:
Press Release Summary:
Power modules, housed in 62 x 108 mm SP6-P low-profile package, offers minimum parasitic inductance, solderable pins for mounting to top PCB, and base plate for heat spreading and thermal resistance. Offering includes triple phase leg and triple dual common source configurations. Each leg is independent and can be configured as 3-phase bridge or current phase leg. Current ratings range from 13-100 A, and current ratings range from 40-90 A.
Original Press Release:
APT Europe Introduces Very Low Profile (12mm) 62 X 108mm Power Modules
Bordeaux, France..... Advanced Power Technology Europe, a leader in power module technology is pleased to announce a new product line of standard power modules in the 62 X 108mm SP6-P very low profile package for high frequency operation and applications where size and particularly thickness is a concern. The very low 12mm profile offers minimum parasitic inductance, solderable pins for easy mounting to a top Printed Circuit Board and a base plate for good heat spreading and best thermal resistance.
The standard product offering for these modules module include triple phase leg and triple dual common source configurations. Each leg is independent and can be configured as a three phase bridge or a large current phase leg when connecting the three legs in parallel. On the triple phase leg the emitter/source bottom switches are open connections which makes possible the implementation of current sense devices. These SP6-P modules are offered with FREDFETs for the phase leg modules, standard MOSFETs for the dual common source devices and also Coolmos(TM), NPT, PT and TRENCH IGBTs. Current ratings range from 13A to 100A @ Tc= 80 Deg. C for voltages in the range of 75 to 1200V for MOSFET, FREDFET and CoolMOS products Current ratings range from 40A to 90A @ Tc= 80 Deg. C for voltages in the range of 600V to 1700V for IGBT modules.
Other product options not listed below are also available upon request. These include:
- Additional current and voltage options
- Reconfiguration of the three leg circuit as a boost chopper circuit for Power Factor Correction (PFC) followed by a full bridge converter.
- Mixing of MOSFETs and IGBTs within the module.
- Other electrical configurations requiring very low profile, minimum weight, and enhanced electrical and thermal performance.
Key features:
· Very low 12mm profile - same as Isotop® height
· Very low inductance for high efficiency at elevated switching frequencies
· Footprint and mounting holes compatible with popular 62mm x 108mm standard modules
· Solderable terminals - easy PCB mounting
· Space and cost savings
· Isolated package - easy mounting to heat sink
· Wide range of technologies available - MOSFETs, FREDFETs, NPT, PT and TRENCH IGBTs
· Wide range of voltage and current ratings
Applications
The use of the latest generation APT PowerMOS 7® MOSFETs , FREDFETs and PT IGBTs allows operating in hard switching mode in the range of 100 kHz to 200 kHz and at higher frequencies in resonant mode. For lower frequency applications NPT and Trench IGBTs are a preferred choice. Principle applications for this extended family are motor control, UPS, power supplies, welding converters and solid state relays for three phase mains.
Data sheets are available to assist the designer, describing the features and benefits of these new products in greater detail.
These may be downloaded from APT's website at www.advancedpower.com or obtained from the factory.
Configuration Part number BVDSS (V) Id (A) @ TC=80°C RDS(on) (mohm) TYPE
APTM08TAM04P 75 90 4.2 MOSFET
APTM10TAM19FP 100 50 19 FREDFET
APTM10AM09FP 100 100 9
APTM20TAM16FP 200 74 16
Triple phase leg APTM50TAM65FP 500 37 65
APTC60TAM35P 600 54 35 CoolMOS
APTC80TA15P 800 21 150
APTM100TA35FP 1000 17 350 FREDFET
APTM120TA57FP 1200 13 570
APTM08TDUM04P 75 90 4.2 MOSFET
APTM10TDUM19P 100 50 19
APTM10DUM09P 100 100 9
APTM20TDUM16P 200 74 16
Triple dual APTM50TDUM65P 500 37 65
common source APTC60TDUM35P 600 54 35 CoolMOS
APTC80TDU15P 800 21 150
APTM100TDU35P 1000 17 350 MOSFET
APTM120TDU57P 1200 13 570
Configuration Part number BVCES (V) IC (A) @ TC=80°C VCE(on) (V) TYPE
APTGU50TA60P 600 50 2.2 PT
APTGF90TA60P 600 90 2.1 NPT
Triple phase leg APTGU40TA120P 1200 40 3.3 PT
APTGF50TA120P 1200 50 3.2 NPT
APTGT75TA120P 1200 75 1.7 TRENCH
APTGT50TA170P 1700 50 2
APTGU50TDU60P 600 50 2.2 PT
APTGF90TDU60P 600 90 2.1 NPT
Triple dual APTGU40TDU120P 1200 40 3.3 PT
common source APTGF50TDU120P 1200 50 3.2 NPT
APTGT75TDU120P 1200 75 1.7 TRENCH
APTGT50TDU170P 1700 50 2
Availability: Samples are available now. Lead time for 10K quantities is 8-12 weeks.
Pricing quantities of 1000 to 2500 pieces ranges from $62.37 to $115.34.
With Operations in Bend, Oregon, Santa Clara, California, Montgomeryville, Pennsylvania and Bordeaux France, APT is a leading supplier of power semiconductors for RF, Microwave, Linear, and Switch mode Applications.
For additional information, contact:
Advanced Power Technology
Phone: (541) 382-8028
Fax: (541) 389-1241
POWERMOS 7® is a registered trademark of Advanced Power Technology.
"COOLMOS" is a trademark of Infineon Technologies AG".
ISOTOP ® is a registered trademark of SGS Thomson.
