Multichannel USB Oscilloscope uses high resolution technology.

Press Release Summary:

Offering 8 channels and 12-bit resolution with one ADC per channel, Pico Technology PicoScope 4824 USB Oscilloscope delivers functionality needed to make precision, time-correlated waveform measurements on multiple channels and range of signal types. Features include 256M samples buffer memory, debug tools, and arbitrary waveform generator. With spacing of 20 mm, BNC connectors accept all common probes and accessories. Tool offers bandwidth of 20 MHz and sampling rate of 80 MS/s.

Original Press Release:

NorthTree Associates Announces Release of New 8 Channel Pico Technology PicoScope 4824 USB Oscilloscope

Offering 8 channels and 12-bit resolution with one ADC per channel, the Pico Technology PicoScope 4824 USB Oscilloscope delivers the functionality needed to make precision, time-correlated waveform measurements on multiple channels and a wide range of signal types.

Combining high resolution technology with 256M samples buffer memory, powerful debug tools and a built-in arbitrary waveform generator, the PicoScope 4824 USB Oscilloscope is the ideal oscilloscope for precise measurements and rapid debug.  Tools such as Mask Limit Testing, Serial Bus Decoding, Advanced Digital Triggers and Persistence Mode help to track problems for rapid troubleshooting.  Waveforms are captured in high resolution, making it easy to distinguish signal from noise to ease debug and analysis.

Typical Applications

• Single- and 3-phase power transmission analysis

• Complex embedded system development

• Multi-sensor systems

• DC power supply sequencing

• Drives and controls

• Automotive system design, debug and validation

• 7.1 and 5.1 audio system measurements

8 channel oscilloscope

The Pico Technology PicoScope 4824 USB Oscilloscope is a low cost, portable solution for multi-input applications.

With 8 high-resolution analog channels it can easily analyze audio, ultrasound, vibration, power, and timing of complex systems, and perform a wide range of precision measurement tasks on multiple inputs at the same time. Although the scope has the same small footprint as Pico’s existing 2-and 4-channel models, the BNC connectors still accept all common probes and accessories with ample spacing of 20 mm.

Despite its compact size, there is no compromise on performance. With a high 12-bit vertical resolution, bandwidth of 20 MHz, 256 MS buffer memory, and a fast sampling rate of 80 MS/s, the PicoScope 4824 has the power and functionality to deliver accurate results. It also features deep memory to analyze multiple serial buses such as UART, I2C, SPI, CAN and LIN plus control and driver signals.

Applications - Power measurements

The PicoScope 4824 USB Oscilloscope is ideal for making a range of power measurements high voltages and currents and low-voltage control signals. For the best results, use a Pico differential voltage probe (TA041 or TA057) in combination with a current clamp (TA167). To improve the efficiency and reliability of power designs, the scope can display and analyze standby power dissipation, inrush current and steady-state power consumption. PicoScope’s built-in measurements and statistics of parameters such as true RMS, frequency, peak-to-peak voltage and THD allow accurate analysis of power quality.

Data Acquisition

With 256M samples of buffer memory the PicoScope can capture over 5 minutes of continuous 50/60 Hz waveform data with high timing resolution. Using the Software Development Kit (SDK) custom applications can be written with storage limited only by the PC hard disk size.

Nonlinear loads and modern power-conversion equipment produce complex waveforms with significant harmonic content. These harmonics reduce efficiency by causing increased heating in equipment and conductors, misfiring in variable speed drives, and torque pulsations in motors. The 12-bit PicoScope 4824 has the precision to measure distortion typically up to the 100th harmonic. On the supply side, power quality issues such as sags and dips, swells and spikes, flicker, interruptions and long-term voltage and frequency variations can also be checked for regulatory compliance.

In a 3-phase distribution system, it is important to characterize and balance loads across phases. With 8 channels the Pico Technology PicoScope 4824 USB Oscilloscope can monitor waveforms of current and voltage on all 4 conductors of a 3-phase plus-neutral system. This helps to identify mismatches that can cause breaker tripping, or transformer and conductor overheating.

Applications - Complex embedded systems

In debugging an embedded system, the application under test may quickly use up all channels available on a scope. The application may call for looking at an I2C or SPI bus at the same time as multiple power rails, DAC outputs and logic signals. With eight channels, the Pico Technology PicoScope 4824 USB Oscilloscope can cope with all of this. Choose whether to decode up to eight serial buses, with analog waveforms and decoded data both visible, or a combination of serial buses and other analog or digital signals. PicoScope provides advanced triggering on all channels, so you can search for runt pulses, drop-outs and noise as well as looking for data patterns using the 4-input Boolean logic trigger.

Established in 2004, NorthTree Associates (Waconia, MN) is a North American distributor that specializes in providing design engineers, test engineers and production engineers the best protocol, bus analysis, and board-level testing and debugging tools available.

More from Construction Equipment and Supplies

All Topics