Advance Lifts, Inc.
St Charles, IL 60174
Dock Lifts suit places where pit mounting is not an option.
Designed for use with powered pallet jacks and straddle stackers, 6200 models have 6 in. lowered height, 8,000 lb capacity, and 6 x 10 ft platform. Offered for all types of mobile material handling equipment, 6300 models have 8 in. lowered height, 12,000 lb capacity, and 6 x 12 ft platform. Both surface mount dock lift types have 60 in. raised height, and are equipped with approach ramps, 18 x 66...
Read More »
Roll Drop Lifts handle coil and rolls.
Available in 18 models, double wide lifts offer extra heavy axle rolling capacities to handle dynamic forces of rolling paper rolls as they come onto lift. End axle capacities are rated at 3,000, 4,500, and 9,000 lbs. Units, provided with V deck to nest rolls, are offered with platform sizes from 48 x 36 in. to 96 x 68 in. with vertical travels of 22, 34, and 46 in.
Read More »
Dock Lift does not require concrete pit.
Top of ground dock lift has 6 ft wide x 8 ft long safety tread steel deck, 18 x 60 in. hinged transfer bridge, and 60 in. wide x 36 in. long hinged chock approach ramp. Lifting capacity is 5000 lbs with 6.25 in. lowered height and 54 in. vertical travel. Lift includes removable safety hand rails, safety restraint chains, and bridge lifting chain. Five HP electric hydraulic power unit is prewired...
Read More »
Lift Tables can raise five tons five feet., then turn it.
Available in 18 models, powered lift and turn tables eliminate manual lifting, bending, and reaching during pallet buildup and breakdown. Turntable platform sizes are available from 24 x 36 to 84 x 84 in. Capacities are from 2,000 to 10,000 lb, with vertical travels from 24 to 60 in. Lift tables are operated by 2 or 5 hp electrohydraulic power unit. Turntables use 1/3 to 3/4 hp soft start and...
Read More »
Lifts/Upenders offer capacities from 2,000 to 10,000 lbs.
Units combine double long lift table and upender, and are used to raise and upend loads in manufacturing, processing, and assembly operations. Vertical travel is 36 in. and tilt is 0 to 90 deg. Lift platforms are 10 ft long and upender platforms range between 48 in. wide x 57 in. long to 60 in. wide x 72 in. long. Standard external power unit operates lift and tilt through joystick control.
Read More »
Dock Lift can be run over by trailers.
Model T2000 Series is available in 10 models with lift capacities from 5,000 to 6,000 lb, platform sizes from 6 x 8 to 8 x 10 ft, and 58 in. travel. All have safety tread steel deck, removable handrails, 12 x 72 in. hinged throwover bridge, and self contained 5 hp power unit that raises lift at 10 to 12 fpm. Scissors legs are constructed from 58,000 psi structural mechanical steel tube. Lift has...
Read More »
Scissor Lifts handle wide, bulky loads.
Double wide scissor lifts, available in 18 models, feature 2 sets of scissor legs under one platform for added strength. Platform sizes range from 14 in. wide x 36 in. long up to 96 in. wide x 96 in. long, with capacities from 4000 to 9600 lbs. Vertical travels are 24, 36, and 48 in. Lifts are equipped with built-in 2 HP motor, magnetic motor starter, 24 V control transformer, and safety fused...
Read More »
Carousel/Picking Lifts are available with cantilever platforms.
Six models of carousel or order picking lifts are available which raise and lower operators to facilitate order picking from rack or carousel systems. They offer lowered heights of 8 and 10 in., travels of 60 and 72 in. and capacity of 2000 lbs. Lift speed is 15 sec with remote 5 HP electric hydraulic power unit. Basic platform sizes range from 4 x 9 ft up to 8 x 14 ft.
Read More »
Lift Tables put parts at proper height.
Lift tables enable workers to position components, work pieces and pallets at the precise height and angle, thus eliminating ergonomic concerns that lead to work-related injuries while improving employee morale. Each comes with UL-approved electrical controller, scissors legs, industrial-grade hydraulic cylinders and oven-baked hard enamel paint.
Read More »