Sabritec, Inc.
Irvine, CA 92614
Share:
Coax Contacts deliver RF performance to 40 GHz.
Terminated to .086 dia flexible cables in multi-pin connector applications, High Frequency Coax Contacts are spring-loaded and engineered with float mount design for low VSWR at microwave frequencies. They offer RF performance up to 26.5 GHz for Size 8 and 40 GHz for Size 12 contacts, with respective VSWRs of 1.15:1 and 1.30:1 typ mated pair. Contacts fit size 8 and 12 cavities for MIL-DTL-38999,...
Read More »
Contact suits single and multi-mode fiber applications.
With standard 1.25 mm ferrule and sleeve, Size 16 ARINC 801 fiber optic terminus is compatible with LC termination processes. Unit features return loss of -50 dB in single mode and insertion loss of .3 dB max for mated pair. In addition to general use design for tight jacketed cable, contact comes in pull-proof design in which cable jacket is crimped on external body and floating mechanism avoids...
Read More »
Contacts suit high-speed interconnect applications.
Designed for board-to-board data transfer applications exceeding 2 Gbps, Dura-Speed Quadrax and Dura-Speed Twinax contacts feature HyperboloidÃ-® shaped basket of individual spring wires that provide up to 10,000 mating cycles. Also featuring immunity to shock and vibration, low insertion/extraction forces, and 360Ã-
Read More »Filter Connectors feature integrated dual flange.
Designed to ease final assembly, dual flange on Filter Connectors enables PCB or Flex Circuit to be soldered or fixed directly to PC Tail protruding from rear of connector. Wash slots machined in flange optimize soldered joints, allowing even heat transfer during soldering. Flange also acts as rigid and mechanically strong standoff for PCB, providing solid datum point internally, minimizing force...
Read More »
D-Sub Connectors have multiway triaxial design.
Multiway Triax D-Subminiature series grounds outer shield of triax contact directly to shell of connector. Multi-finger ground spring, fixed around triax shell, provides multi-point contact engagement for EMI shielding. Size 10 triax interface transmits data at 100 ohm differential pair impedance. Able to mate up to 14 contacts in one connector interface, design has polarizing shell to prevent...
Read More »
Connectors facilitate board to board data transfer.
Offered in true differential twinax packages with NDL, SMA, and Micro-D Size constraints, Micro Twinax series miniaturized connectors support 100 Base-T Ethernet and 1 Gbps min Fibe Channel operation. Products can be driven via matched impedance differential pair interconnections for board to board data transfer. All connectors are available in straight or right angle versions.
Read More »
Coaxial Connector helps eliminate strain on solder joint.
Rear body of Torque Isolation Coaxial Connector is extended to alleviate stress against cable to connector solder joint. Slotted extension straddles semi-rigid cable, confining it to its initial direction while increasing mutual solder surfaces between cable and connector body.
Read More »
Connectors suit high pressure/low leakage applications.
Rated at IP 67 and capable of sealing up to 35 psi in unmated, open faced condition, water resistant connectors can be used in systems where moisture, humidity, water, and dust are present. Available in circular, rack and panel, and D-subminiature types, connectors can be custom designed to fit specification standard, or can incorporate special features, including different mounting types, unique...
Read More »
Coaxial Hybrid Connectors incorporate MCDX contacts.
Series RF Coaxial MDCX Connectors feature multipin connectors that offer VSWR of 1.25:1 up to 20 GHz. Each MDCX contact has maximum overall diameter of 0.125 in. fitted into low profile metal housing. Insert arrangements are available in 4, 6, 8, and 10 way coaxial assemblies with mixed signal and power contacts offered in hybrid layouts. Connectors suit test and measurement, burn-in, and high...
Read More »Coax Contacts deliver RF performance to 40 GHz.
Terminated to .086 dia flexible cables in multi-pin connector applications, High Frequency Coax Contacts are spring-loaded and engineered with float mount design for low VSWR at microwave frequencies. They offer RF performance up to 26.5 GHz for Size 8 and 40 GHz for Size 12 contacts, with respective VSWRs of 1.15:1 and 1.30:1 typ mated pair. Contacts fit size 8 and 12 cavities for MIL-DTL-38999,...
Read More »
Contact suits single and multi-mode fiber applications.
With standard 1.25 mm ferrule and sleeve, Size 16 ARINC 801 fiber optic terminus is compatible with LC termination processes. Unit features return loss of -50 dB in single mode and insertion loss of .3 dB max for mated pair. In addition to general use design for tight jacketed cable, contact comes in pull-proof design in which cable jacket is crimped on external body and floating mechanism avoids...
Read More »
Contacts suit high-speed interconnect applications.
Designed for board-to-board data transfer applications exceeding 2 Gbps, Dura-Speed Quadrax and Dura-Speed Twinax contacts feature HyperboloidÃ-® shaped basket of individual spring wires that provide up to 10,000 mating cycles. Also featuring immunity to shock and vibration, low insertion/extraction forces, and 360Ã-
Read More »Sabritec Appoints Steve Humphries as European Sales Manager
Sabritec, a custom connecting devices manufacturer, has strengthened its operations within Europe with the appointment of Mr. Steve Humphries as European Sales Manager. In this position, Mr. Humphries will be reporting directly to the European General Manager based out of London, UK. He will be responsible for building on the relationships and partnerships already established throughout Europe by...
Read More »Sabritec Appoints Fredrik Thorell as Applications Engineer
Sabritec, a custom connecting devices manufacturer, is pleased to welcome Fredrik Thorell as their new Applications Engineer. In this position, Fredrik will act as the liaison between the customer and engineering department. Fredrik will provide commercial and technical product support and recommend appropriate application specific interconnect solutions to the U.S. and European markets. I am...
Read More »Sabritec Appoints Amir Saket as Director of Operations
Sabritec, a custom connecting devices manufacturer, is pleased to welcome Amir Saket as the new Director of Operations. In this position, Amir is responsible for developing and maintaining manufacturing business plans which support customer requirements. He will ensure that objectives for product delivery, production costs, and quality requirements are met. Amir will drive Sabritec's lean...
Read More »Filter Connectors feature integrated dual flange.
Designed to ease final assembly, dual flange on Filter Connectors enables PCB or Flex Circuit to be soldered or fixed directly to PC Tail protruding from rear of connector. Wash slots machined in flange optimize soldered joints, allowing even heat transfer during soldering. Flange also acts as rigid and mechanically strong standoff for PCB, providing solid datum point internally, minimizing force...
Read More »
D-Sub Connectors have multiway triaxial design.
Multiway Triax D-Subminiature series grounds outer shield of triax contact directly to shell of connector. Multi-finger ground spring, fixed around triax shell, provides multi-point contact engagement for EMI shielding. Size 10 triax interface transmits data at 100 ohm differential pair impedance. Able to mate up to 14 contacts in one connector interface, design has polarizing shell to prevent...
Read More »
Connectors facilitate board to board data transfer.
Offered in true differential twinax packages with NDL, SMA, and Micro-D Size constraints, Micro Twinax series miniaturized connectors support 100 Base-T Ethernet and 1 Gbps min Fibe Channel operation. Products can be driven via matched impedance differential pair interconnections for board to board data transfer. All connectors are available in straight or right angle versions.
Read More »
Coaxial Connector helps eliminate strain on solder joint.
Rear body of Torque Isolation Coaxial Connector is extended to alleviate stress against cable to connector solder joint. Slotted extension straddles semi-rigid cable, confining it to its initial direction while increasing mutual solder surfaces between cable and connector body.
Read More »