Internation Surface Preparation Corp.
Fresno, TX 77545
Share:
Shot Blasting System strips, cleans, and profiles in one step.
Portable Blastrac 1-8DEZ has 8 in. blast pattern and can prepare up to 250 sq ft/hr. Applications include small industrial floor areas, tight areas around equipment and obstructions, balconies, test patches, and preparation of pool decks, decorative concrete applications, and concrete prior to installation of wood flooring. It is suitable for use by flooring contractors, painting and coating...
Read More »Shot Blasting System prepares concrete and steel surfaces.
Self-propelled BlastracÃ-® 1-10DMK3 provides 1-step surface preparation of concrete or steel, removing markings, dirt, and old coatings. It handles concrete removal up to Ã-¼ in. and removes paint, rust, and corrosion from steel surfaces. System runs on 230/460 V, 3-phase power and cleans 200-1,000 ft2/hr, depending on application. It includes blast unit with 10 in. cleaning path and dust...
Read More »Blast Cleaning System suits medium to large jobs.
BlastracÃ-® GPX 10-18 propane-powered, ride-on shot blast cleaning system strips, cleans, and profiles simultaneously. Onboard dust collection system controls dust and contaminants. With 10 in. blast cleaning path and travel speed up to 200 fpm, system offers production capacity up to 1300 ftÃ-²/hr.
Read More »Airblasting Systems suit high volume applications.
Bulk Abrasive Airblasting Systems use piping designed to provide lowest possible pressure drop. They feature multi-outlet Thompson Valve(TM) II controls that allow each operator independent control of abrasive media flow. All systems have normally closed, fail-safe metering and control valves. Standard bulk systems include 120, 160, 500, 650, and 800 ftÃ-³ models. Optional trailers are...
Read More »Cleaning System prepares concrete and steel surfaces.
BlastracÃ-® 2-20D portable blast cleaning system produces 20 in. blast pattern to strip, clean, and profile surfaces in one step. Designed for medium to large sized jobs, its travel speed is rated to 108 ft/minute. System uses two side-by-side blast wheels, positioned to ensure even pattern. It includes twin 15 HP motors, 8-54 dust collector with eight filter cartridges, and automatic pulse...
Read More »Saw routs out cracks to depth of 1 1/4 in.
Sawtec(R) Crac-Vac crack chasing saw operates virtually dust free when routing out cracks and joints in preparation for application of repair compounds. Vacuum housing with internal impeller fan routes dust to reusable dust collection bag. When mounted on dolly, saw can be used for straight-line joint cleanout work, or for cutting artificial grout lines for decorative concrete applications.
Read More »Shot Blaster is suitable for concrete, steel, and stone.
BlastracÃ-® 1-5HH hand-held shot blaster can be used for decorative concrete applications such as stenciling and more. Virtually dust-free, 1-5HH cleans and prepares small floor and wall surfaces, balconies and stairways, and small metal surfaces such as weld seams. Applications of this 110V unit include cleaning, contouring, and preparation for repair and restoration work. 1-5HH may be used...
Read More »Mortar Saw cuts joints dust free.
Sawtec(TM) Tuc-Pointer cuts out mortar or grout joints. It has maximum cutting depth of 1-1/4 in. and, when used with dust collection system, is virtually dust free. Unit cuts dry, and may be used in horizontal or vertical applications. It has heavy-duty grinder with electronic speed stabilizer, overload warning, and automatic shut-off protection. Adjustable depth shoe is available to enhance...
Read More »Graffiti Removal System uses baking soda.
Accustrip SystemÃ-® works with sodium bicarbonate blast media, and is safe for use on brick, limestone, concrete, granite, metal, glass, and tiles. Abrasive blasting system is suitable for graffiti removal, cleaning, degreasing, general maintenance, depainting, deodorizing, and other surface preparation. Nozzles are available for applications ranging from stripping delicate substrates and...
Read More »Cleanout Saws help repair cracked floors.
Crack chasing and joint cleanout saws rout out random cracks and joints prior to use of repair compound. All concrete cuts can be made with either hand held or walk-behind saws. Crac-Vac routs out random cracks to depth of 1-1/4 in., and can be used for straight-line joint cleanout work. Cutting to 1-1/2 in., walk-behind CC-100 crack chaser cuts up to 8 ft of crack/min. Cut-Vac cuts to 2-1/2 in....
Read More »Shot Blasting System strips, cleans, and profiles in one step.
Portable Blastrac 1-8DEZ has 8 in. blast pattern and can prepare up to 250 sq ft/hr. Applications include small industrial floor areas, tight areas around equipment and obstructions, balconies, test patches, and preparation of pool decks, decorative concrete applications, and concrete prior to installation of wood flooring. It is suitable for use by flooring contractors, painting and coating...
Read More »Shot Blasting System prepares concrete and steel surfaces.
Self-propelled BlastracÃ-® 1-10DMK3 provides 1-step surface preparation of concrete or steel, removing markings, dirt, and old coatings. It handles concrete removal up to Ã-¼ in. and removes paint, rust, and corrosion from steel surfaces. System runs on 230/460 V, 3-phase power and cleans 200-1,000 ft2/hr, depending on application. It includes blast unit with 10 in. cleaning path and dust...
Read More »Blast Cleaning System suits medium to large jobs.
BlastracÃ-® GPX 10-18 propane-powered, ride-on shot blast cleaning system strips, cleans, and profiles simultaneously. Onboard dust collection system controls dust and contaminants. With 10 in. blast cleaning path and travel speed up to 200 fpm, system offers production capacity up to 1300 ftÃ-²/hr.
Read More »Airblasting Systems suit high volume applications.
Bulk Abrasive Airblasting Systems use piping designed to provide lowest possible pressure drop. They feature multi-outlet Thompson Valve(TM) II controls that allow each operator independent control of abrasive media flow. All systems have normally closed, fail-safe metering and control valves. Standard bulk systems include 120, 160, 500, 650, and 800 ftÃ-³ models. Optional trailers are...
Read More »Cleaning System prepares concrete and steel surfaces.
BlastracÃ-® 2-20D portable blast cleaning system produces 20 in. blast pattern to strip, clean, and profile surfaces in one step. Designed for medium to large sized jobs, its travel speed is rated to 108 ft/minute. System uses two side-by-side blast wheels, positioned to ensure even pattern. It includes twin 15 HP motors, 8-54 dust collector with eight filter cartridges, and automatic pulse...
Read More »Saw routs out cracks to depth of 1 1/4 in.
Sawtec(R) Crac-Vac crack chasing saw operates virtually dust free when routing out cracks and joints in preparation for application of repair compounds. Vacuum housing with internal impeller fan routes dust to reusable dust collection bag. When mounted on dolly, saw can be used for straight-line joint cleanout work, or for cutting artificial grout lines for decorative concrete applications.
Read More »Shot Blaster is suitable for concrete, steel, and stone.
BlastracÃ-® 1-5HH hand-held shot blaster can be used for decorative concrete applications such as stenciling and more. Virtually dust-free, 1-5HH cleans and prepares small floor and wall surfaces, balconies and stairways, and small metal surfaces such as weld seams. Applications of this 110V unit include cleaning, contouring, and preparation for repair and restoration work. 1-5HH may be used...
Read More »Mortar Saw cuts joints dust free.
Sawtec(TM) Tuc-Pointer cuts out mortar or grout joints. It has maximum cutting depth of 1-1/4 in. and, when used with dust collection system, is virtually dust free. Unit cuts dry, and may be used in horizontal or vertical applications. It has heavy-duty grinder with electronic speed stabilizer, overload warning, and automatic shut-off protection. Adjustable depth shoe is available to enhance...
Read More »Graffiti Removal System uses baking soda.
Accustrip SystemÃ-® works with sodium bicarbonate blast media, and is safe for use on brick, limestone, concrete, granite, metal, glass, and tiles. Abrasive blasting system is suitable for graffiti removal, cleaning, degreasing, general maintenance, depainting, deodorizing, and other surface preparation. Nozzles are available for applications ranging from stripping delicate substrates and...
Read More »Cleanout Saws help repair cracked floors.
Crack chasing and joint cleanout saws rout out random cracks and joints prior to use of repair compound. All concrete cuts can be made with either hand held or walk-behind saws. Crac-Vac routs out random cracks to depth of 1-1/4 in., and can be used for straight-line joint cleanout work. Cutting to 1-1/2 in., walk-behind CC-100 crack chaser cuts up to 8 ft of crack/min. Cut-Vac cuts to 2-1/2 in....
Read More »