Sandvik Coromant Co.
P.O. Box 428
Fair Lawn, NJ 07410
Share:
Sandvik Coromant Releases Two New Insert Grades for Steel Milling
Sandvik Coromant’s GC4330 and GC4340 are designed to increase resistant and tool life and be resistant to thermal cracks. GC4330 has applications for semi-finish face milling and the GC4340 has applications for rough shoulder and groove milling.
Read More »
Sandvik Coromant Releases Two New Insert Grades for Steel Milling
Sandvik Coromant’s GC4330 and GC4340 are designed to increase resistant and tool life and be resistant to thermal cracks. GC4330 has applications for semi-finish face milling and the GC4340 has applications for rough shoulder and groove milling.
Read More »
New Exchangeable-Tip Drill Grades Are Produced with Zertivo
Sandvik Coromant has released three new grades for its CoroDrill 870 series of exchangeable-tip drills. These grades, GC4344, GC3334, and GC2334, are produced with Zertivo, a PVD (Physical Vapor Deposition) that amplifies grade performance and protects againt chipping and wear. The grades are available in various geometries and cover applications in most ISO materials, although they are optimized...
Read More »
New Exchangeable-Tip Drill Grades Are Produced with Zertivo
Sandvik Coromant has released three new grades for its CoroDrill 870 series of exchangeable-tip drills. These grades, GC4344, GC3334, and GC2334, are produced with Zertivo, a PVD (Physical Vapor Deposition) that amplifies grade performance and protects againt chipping and wear. The grades are available in various geometries and cover applications in most ISO materials, although they are optimized...
Read More »
Sandvik Coromant to Release Two New Grades for Interrupted Hard-part Turning Operations
Sandvik Coromant will have two new grades for interrupted hard-part turning operations available in October of 2018; CB7125 and CB7135. They will complete and complement the existing CB7105 and CB7115 grades. These grades enable the performance of medium-to-heavy interrupted cuts and removal of the hardened layer in steel components for the automotive industry. They offer longer and more...
Read More »
Sandvik Coromant to Release Two New Grades for Interrupted Hard-part Turning Operations
Sandvik Coromant will have two new grades for interrupted hard-part turning operations available in October of 2018; CB7125 and CB7135. They will complete and complement the existing CB7105 and CB7115 grades. These grades enable the performance of medium-to-heavy interrupted cuts and removal of the hardened layer in steel components for the automotive industry. They offer longer and more...
Read More »
New Ceramic Insert Grades are Designed for High Speed Turning Applications
Sandvik’s Ceramic Insert Grades are available in CC6220 and CC6230 models. Units are suitable for use on components made from HRSA materials. CC6230 RPGX inserts deliver cutting speeds up to 400 m/min during rough-turning operations and metal removal rate of 80 cm³/min. Units increase productivity of up to 50% than whisker ceramics and SiAlONs.
Read More »
New Ceramic Insert Grades are Designed for High Speed Turning Applications
Sandvik’s Ceramic Insert Grades are available in CC6220 and CC6230 models. Units are suitable for use on components made from HRSA materials. CC6230 RPGX inserts deliver cutting speeds up to 400 m/min during rough-turning operations and metal removal rate of 80 cm³/min. Units increase productivity of up to 50% than whisker ceramics and SiAlONs.
Read More »
New CoroChuck 935 Hydraulic Chuck is Based on Fulcrum Technology
CoroChuck 935 Hydraulic Chuck is offered in 20 and 25 mm bore sizes for HSK-A/C/T, Coromant Capto®, cylindrical shank and VDI machine interfaces. Unit offers clamping length of four times the diameter. The chuck uses EasyFix™ sleeves that help in adjusting center height. Unit comes with a metallic sealing and thin brazed membrane for an improved clamping function.
Read More »
New CoroChuck 935 Hydraulic Chuck is Based on Fulcrum Technology
CoroChuck 935 Hydraulic Chuck is offered in 20 and 25 mm bore sizes for HSK-A/C/T, Coromant Capto®, cylindrical shank and VDI machine interfaces. Unit offers clamping length of four times the diameter. The chuck uses EasyFix™ sleeves that help in adjusting center height. Unit comes with a metallic sealing and thin brazed membrane for an improved clamping function.
Read More »