The Witte Co., Inc.
P.O. Box 47
Washington, NJ 07882-0047
New Witte C-30 Clamp Delivers up to 1,700 lbs. of Clamping Force
Features stainless steel yoke and roll pin assembly. Available in cast aluminum and stainless steel construction. Eliminates the need for steel bolts, rivets, welds and other fastening methods.
Read More »
New Witte Drying System is Suitable for Close Cycle Drying Products
The Witte Drying System features an integral dust collector that is placed above the fluid bed drying zone. The unit allows drying of food, chemical and bulk material processors for products less than 250 µm in size. The system is designed for closed cycle products that require nitrogen purge or solvent recovery such as cooling spices, grains, vitamins, sugar and processing fine particles.
Read More »
Fluid Bed Dryers Feature Unitary, Steel Bases That Accommodate Auxiliary Equipment for Easy Process Integration
Witte Systems Engineered as Complete Solution Washington, NJ: Vibrating fluid bed dryers and coolers from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), feature rugged, unitary, steel bases as standard that allow cover lift hoists, process air ductwork, control panels, monitoring instrumentation, and other auxiliary equipment to be attached to the system as...
Read More »
Two-Stage Plastic Pellet Classifier Features Removable Screening Deck
With No Tools, Witte Innovation Invites Easy Access for Cleaning Washington, NJ: The two-stage Witte 700 Series classifiers from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), automatically screen the plastic pellets through two, consecutive screening decks, each perforated with holes based on the required pellet diameter. As pellets enter the infeed, the...
Read More »
New Vibratory Process Equipment Deliver Consistent Linear Motion
Witte’s Vibratory Process Equipment is equipped with eccentric weight vibrators that adds or cancels the reactive centrifugal force depending on the angular position. Unit is suitable for use in foods, chemicals, pharmaceuticals, minerals and plastics applications.
Read More »
Automated Greasing System eliminates line shutdowns.
Witte’s Automated Greasing System is suitable for installation on large, vibrating fluid bed dryers processing chemicals, pharmaceuticals, foods and mineral products. This system is designed with dual shaft drive and eliminates manual greasing, downtime and recurring task from the maintenance schedule.
Read More »
Pneumatic Cover Lift features an integral baghouse dust collector.
Pneumatic Cover Lift enables user to roll the dryer forward on rails and eliminates the need of an on-site overhead crane. Unit’s dust collector is set above the drying zone. Product allows operators to clean and inspect the dryer’s interior.
Read More »
Vibrating Dewatering Screens Remove Excess Moisture to Save Energy in Fluid Bed Drying
Witte Co. Approach Allows Saturated Materials to Dry Faster Washington, NJ: Vibrating dewatering screens from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), remove excess moisture from saturated materials to allow fast, efficient drying downstream in a fluid bed dryer. Draining the moisture mechanically at low cost instead of using heat energy, the vibrating...
Read More »
Fluid Bed Dryer Design Prevents Product Attrition
Witte Co. Innovations Protect Particle Integrity During Processing Washington, NJ: Vibrating fluid bed dryers and coolers from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), are engineered with a series of proprietary design innovations that protect and maintain particle size and shape during processing to prevent costly product attrition. Featuring a narrow...
Read More »
Plastic Pellet Classifiers feature double deck design.
Available on Witte 700 Series classifiers, diamond double deck design screens product twice through dual, perforated decks for optimal removal of off-spec pellets. Diamond-shaped openings in first stage screening deck provide constant access to pellet flow in second stage screening deck below to monitor flow during operation, enabling blockages to be quickly found and removed. By quieting pellets...
Read More »
New Witte C-30 Clamp Delivers up to 1,700 lbs. of Clamping Force
Features stainless steel yoke and roll pin assembly. Available in cast aluminum and stainless steel construction. Eliminates the need for steel bolts, rivets, welds and other fastening methods.
Read More »Witte Company Celebrates 80th Anniversary
Milestone Marks Four Generations of Vibratory Process Equipment Innovation Washington, NJ: Process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), is celebrating its 80th anniversary as a pioneer in the development of vibratory fluid bed dryers, coolers, classifiers, screeners, and other machinery. Founded by Richard Witte in New York City in 1938 to meet demand for...
Read More »
New Witte Drying System is Suitable for Close Cycle Drying Products
The Witte Drying System features an integral dust collector that is placed above the fluid bed drying zone. The unit allows drying of food, chemical and bulk material processors for products less than 250 µm in size. The system is designed for closed cycle products that require nitrogen purge or solvent recovery such as cooling spices, grains, vitamins, sugar and processing fine particles.
Read More »
Fluid Bed Dryers Feature Unitary, Steel Bases That Accommodate Auxiliary Equipment for Easy Process Integration
Witte Systems Engineered as Complete Solution Washington, NJ: Vibrating fluid bed dryers and coolers from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), feature rugged, unitary, steel bases as standard that allow cover lift hoists, process air ductwork, control panels, monitoring instrumentation, and other auxiliary equipment to be attached to the system as...
Read More »
Two-Stage Plastic Pellet Classifier Features Removable Screening Deck
With No Tools, Witte Innovation Invites Easy Access for Cleaning Washington, NJ: The two-stage Witte 700 Series classifiers from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), automatically screen the plastic pellets through two, consecutive screening decks, each perforated with holes based on the required pellet diameter. As pellets enter the infeed, the...
Read More »
New Vibratory Process Equipment Deliver Consistent Linear Motion
Witte’s Vibratory Process Equipment is equipped with eccentric weight vibrators that adds or cancels the reactive centrifugal force depending on the angular position. Unit is suitable for use in foods, chemicals, pharmaceuticals, minerals and plastics applications.
Read More »
Automated Greasing System eliminates line shutdowns.
Witte’s Automated Greasing System is suitable for installation on large, vibrating fluid bed dryers processing chemicals, pharmaceuticals, foods and mineral products. This system is designed with dual shaft drive and eliminates manual greasing, downtime and recurring task from the maintenance schedule.
Read More »New Literature Showcases Line of Vibrating Process Equipment
Witte Co. Provides Detailed View of Fluid Bed Dryers, Classifiers, Auxiliary Equipment Washington, NJ: A new brochure from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com) showcases the company's line of vibrating fluid bed dryers, coolers, pellet classifiers, screeners, conveyors and other vibrating process equipment. Presenting the 4th generation,...
Read More »
Pneumatic Cover Lift features an integral baghouse dust collector.
Pneumatic Cover Lift enables user to roll the dryer forward on rails and eliminates the need of an on-site overhead crane. Unit’s dust collector is set above the drying zone. Product allows operators to clean and inspect the dryer’s interior.
Read More »
Vibrating Dewatering Screens Remove Excess Moisture to Save Energy in Fluid Bed Drying
Witte Co. Approach Allows Saturated Materials to Dry Faster Washington, NJ: Vibrating dewatering screens from process equipment manufacturer The Witte Co., Washington, New Jersey (www.witte.com), remove excess moisture from saturated materials to allow fast, efficient drying downstream in a fluid bed dryer. Draining the moisture mechanically at low cost instead of using heat energy, the vibrating...
Read More »