Vanton Pump & Equipment Corp.

Mobile Pump/Tank Cart handles caustics and ultrapure fluids.
Fluid & Gas Flow Equipment

Mobile Pump/Tank Cart handles caustics and ultrapure fluids.

Featuring non-metallic design, Mobile Pump/Tank Cart transfers wastewater and caustic/acid chemicals with no corrosion and ultrapure fluids with no contamination. All fluid contact surfaces are solid polypropylene, polyethylene, PVC, or other inert thermoplastic. Utilizing rotor mounted on eccentric shaft, self-priming Flex-I-Liner® CC-PY12B pump pushes fluid trapped between elastomer liner...

Read More »
Solar Powered Pumping System feeds water treatment chemicals.
Fluid & Gas Flow Equipment

Solar Powered Pumping System feeds water treatment chemicals.

Featuring non-metallic, peristaltic pump, Solar Powered Chemical Dosing System provides corrosion-free transfer of caustic/acidic treatment chemicals from thermoplastic storage tank to water and wastewater containment facilities. Self-priming pump, with flows to 2 gpm and pressures to 25 psig at up to 185°F, meters fixed volume of liquid over user-programmed time intervals. System uses 40 W...

Read More »
Thermoplastic Sump Pump fits in restricted areas.
Fluid & Gas Flow Equipment

Thermoplastic Sump Pump fits in restricted areas.

Available in lengths to 4 ft with motors to 125 hp, SUMP-GARD® Model SGK PY800SP handles flows to 800 gpm and heads to 180 ft at temperatures to 275°F. Close-coupled, cantilevered shaft minimizes headroom requirements and eliminates immersed bearings that are prone to fail in caustic, acidic, and abrasive applications. Design allows run-dry operation with no damage to pump. All wetted...

Read More »
Close-Coupled Mag-Drive Pump eliminates corrosion.
Fluid & Gas Flow Equipment

Close-Coupled Mag-Drive Pump eliminates corrosion.

Available in sizes from 1.5 x 1 x 6 in. to 3 x 2 x 8 in., CHEM-GARD® CGMC offers flows to 400 gpm at heads to 220 ft TDH. Unit features sealless, single-stage, volute-type centrifugal design with all fluid contact components molded of homogenous polypropylene or PVDF. Chemically inert, abrasion-resistant thermoplastic components eliminate pinpoint porosity, substrate separation, and wear....

Read More »
Thermoplastic Sump Pump has cantilevered, bearingless shaft.
Fluid & Gas Flow Equipment

Thermoplastic Sump Pump has cantilevered, bearingless shaft.

All wetted components of SUMP-GARD® model SGK-2700 centrifugal pump are molded of solid Polypropylene, PVDF, or CPVC to eliminate chemical attack while minimizing abrasion. Alloy shaft, isolated from fluid contact, transfers torque from 125 hp motor and can employ balanced 14 in. dia impeller. This cantilevered shaft eliminates need for immersed bearings and promotes dependable operation...

Read More »
Portable Pump System handles corrosive and toxic chemicals.
Fluid & Gas Flow Equipment

Portable Pump System handles corrosive and toxic chemicals.

Flex-i-Cart® consists of Flex-i-liner® sealless, peristaltic type, rotary pump furnished with UHMW polyethylene, polypropylene, or Teflon® body blocks, and 1 of 7 different elastomeric linings. Pump and motor assembly is mounted on rubber-wheeled dolly, along with quick disconnect suction and discharge hoses. Able to handle acids, caustics, solvents, and chlorides, system offers...

Read More »
Self-Priming Thermoplastic Pumps are magnetically driven.
Fluid & Gas Flow Equipment

Self-Priming Thermoplastic Pumps are magnetically driven.

Able to handle corrosive and aggressive fluids, PG/CGM heavy duty, horizontal end suction centrifugal pumps are constructed with thick-sectioned, solid thermoplastic components. All fluid contact structural components are molded from solid homogeneous thermoplastics, which are chemically inert and abrasion-resistant. Products handle temperatures to 275Â-ºF and flows from 5-175 gpm at heads...

Read More »
Centrifugal Pump handles corrosive and aggressive fluids.
Fluid & Gas Flow Equipment

Centrifugal Pump handles corrosive and aggressive fluids.

Prime-Gard® nonmetallic, self-priming, horizontal pump offers fluid contact components made of polypropylene or polyvinylidene fluoride. Retractable front-bearing design allows for mechanical seal inspection. Steel shaft is isolated from liquids and gasses by thick-sectioned, chemically inert, thermoplastic sheath. Pump line provides flows from 5 to 175 gpm with heads to 170 ft at...

Read More »
Mobile Pump/Tank Cart handles caustics and ultrapure fluids.
Fluid & Gas Flow Equipment

Mobile Pump/Tank Cart handles caustics and ultrapure fluids.

Featuring non-metallic design, Mobile Pump/Tank Cart transfers wastewater and caustic/acid chemicals with no corrosion and ultrapure fluids with no contamination. All fluid contact surfaces are solid polypropylene, polyethylene, PVC, or other inert thermoplastic. Utilizing rotor mounted on eccentric shaft, self-priming Flex-I-Liner® CC-PY12B pump pushes fluid trapped between elastomer liner...

Read More »
People in the News

Lewis and Comerford Head Vanton Pump

HILLSIDE, NJ, USAÂ-¯The Board of Directors of Vanton Pump & Equipment Corp., has appointed Lawrence Lewis as President and Kenneth Comerford as Vice President. Lewis joined the privately held manufacturer in 1991 and formerly held the position of Executive Vice President. As president he succeeds his father, Gerald Lewis, who co-founded the company in 1950. Comerford started with the company...

Read More »
Solar Powered Pumping System feeds water treatment chemicals.
Fluid & Gas Flow Equipment

Solar Powered Pumping System feeds water treatment chemicals.

Featuring non-metallic, peristaltic pump, Solar Powered Chemical Dosing System provides corrosion-free transfer of caustic/acidic treatment chemicals from thermoplastic storage tank to water and wastewater containment facilities. Self-priming pump, with flows to 2 gpm and pressures to 25 psig at up to 185°F, meters fixed volume of liquid over user-programmed time intervals. System uses 40 W...

Read More »
Thermoplastic Sump Pump fits in restricted areas.
Fluid & Gas Flow Equipment

Thermoplastic Sump Pump fits in restricted areas.

Available in lengths to 4 ft with motors to 125 hp, SUMP-GARD® Model SGK PY800SP handles flows to 800 gpm and heads to 180 ft at temperatures to 275°F. Close-coupled, cantilevered shaft minimizes headroom requirements and eliminates immersed bearings that are prone to fail in caustic, acidic, and abrasive applications. Design allows run-dry operation with no damage to pump. All wetted...

Read More »
Close-Coupled Mag-Drive Pump eliminates corrosion.
Fluid & Gas Flow Equipment

Close-Coupled Mag-Drive Pump eliminates corrosion.

Available in sizes from 1.5 x 1 x 6 in. to 3 x 2 x 8 in., CHEM-GARD® CGMC offers flows to 400 gpm at heads to 220 ft TDH. Unit features sealless, single-stage, volute-type centrifugal design with all fluid contact components molded of homogenous polypropylene or PVDF. Chemically inert, abrasion-resistant thermoplastic components eliminate pinpoint porosity, substrate separation, and wear....

Read More »
Thermoplastic Sump Pump has cantilevered, bearingless shaft.
Fluid & Gas Flow Equipment

Thermoplastic Sump Pump has cantilevered, bearingless shaft.

All wetted components of SUMP-GARD® model SGK-2700 centrifugal pump are molded of solid Polypropylene, PVDF, or CPVC to eliminate chemical attack while minimizing abrasion. Alloy shaft, isolated from fluid contact, transfers torque from 125 hp motor and can employ balanced 14 in. dia impeller. This cantilevered shaft eliminates need for immersed bearings and promotes dependable operation...

Read More »
Portable Pump System handles corrosive and toxic chemicals.
Fluid & Gas Flow Equipment

Portable Pump System handles corrosive and toxic chemicals.

Flex-i-Cart® consists of Flex-i-liner® sealless, peristaltic type, rotary pump furnished with UHMW polyethylene, polypropylene, or Teflon® body blocks, and 1 of 7 different elastomeric linings. Pump and motor assembly is mounted on rubber-wheeled dolly, along with quick disconnect suction and discharge hoses. Able to handle acids, caustics, solvents, and chlorides, system offers...

Read More »
Self-Priming Thermoplastic Pumps are magnetically driven.
Fluid & Gas Flow Equipment

Self-Priming Thermoplastic Pumps are magnetically driven.

Able to handle corrosive and aggressive fluids, PG/CGM heavy duty, horizontal end suction centrifugal pumps are constructed with thick-sectioned, solid thermoplastic components. All fluid contact structural components are molded from solid homogeneous thermoplastics, which are chemically inert and abrasion-resistant. Products handle temperatures to 275Â-ºF and flows from 5-175 gpm at heads...

Read More »
Centrifugal Pump handles corrosive and aggressive fluids.
Fluid & Gas Flow Equipment

Centrifugal Pump handles corrosive and aggressive fluids.

Prime-Gard® nonmetallic, self-priming, horizontal pump offers fluid contact components made of polypropylene or polyvinylidene fluoride. Retractable front-bearing design allows for mechanical seal inspection. Steel shaft is isolated from liquids and gasses by thick-sectioned, chemically inert, thermoplastic sheath. Pump line provides flows from 5 to 175 gpm with heads to 170 ft at...

Read More »

All Topics