Highland Technology

New P348 Quadrature Modulator Comes with Half-Rack Mounting Option
Electronic Components & Devices

New P348 Quadrature Modulator Comes with Half-Rack Mounting Option

Suitable for range of transducer simulation, including eddy-current, inductive, and capacitive sensors, or classic RF modulation tasks. Offers carrier frequency ranging from 500 KHz to 20 MHz, and modulation capability is suitable for hardware simulation of vibration, clearance, or gear tooth/blade tip sensors. Features isolated inputs and outputs, signal monitor outputs, and high linearity, wide...

Read More »
Highland Offers P545 Simulation/Acquisition Module with Effective Travel Limit-Stop Functions and Forced Overrides
Controls & Controllers

Highland Offers P545 Simulation/Acquisition Module with Effective Travel Limit-Stop Functions and Forced Overrides

Features 12 independent isolated i/o channels each can be sine wave excitation source or a an input measurement channel. Can be used as 12-channel programmable sine wave source and AC voltmeter with 0 to 32 volts RMS range. Allows independent controlling of channels and is designed for synchro, resolver, RVDT and LVDT type magnetic rotation and position sensors.

Read More »
New P330 Aerospace Sensor Simulator Allows Glitch-free Level Simulation to 1% Accuracy with 16-Bit Resolution on Capacitance and Resistance
Test & Measurement

New P330 Aerospace Sensor Simulator Allows Glitch-free Level Simulation to 1% Accuracy with 16-Bit Resolution on Capacitance and Resistance

Simulate capacitive oil or fuel level sensors and includes built-in self-test. Supports simulation of two tank level sensors with reference electrodes and provides sensor/cable fault simulation. Four independent isolated channels can each simulate both capacitance and resistance, from 5 pF to 5000 pF and 5K ohms to over 10 Megs.

Read More »
P620 Resistance Simulator features USB and Ethernet interfaces.
Test & Measurement

P620 Resistance Simulator features USB and Ethernet interfaces.

Providing monotonic resistance changes, P620 Resistance Simulator includes isolated channels for simulating platinum RTDs and 5 ohms to 5 Mohms resistances. Featuring built in self test, unit allows loopback checking and automatic self test. Eliminating transient errors in relay switching, simulator allows calibration by DVM without disturbing connections to the equipment.

Read More »
Compact Precision Laser Driver offers multimodal operation.
Construction Equipment and Supplies

Compact Precision Laser Driver offers multimodal operation.

Along with DC-coupled trigger signal that produces 2 nsec transitions, D200 offers up to 4 A of regulated drive current that supports lasers with forward voltages up to 9 V. Built-in edge-triggered pulse generator provides up to 1 Â-µsec pulse widths, while pulse-follower mode, also provided, accommodates externally-defined trigger widths up to 100% duty CW. Power, pulse width, drive...

Read More »
Waveform Playback Unit supports aerospace simulation testing.
Agricultural & Farming Products

Waveform Playback Unit supports aerospace simulation testing.

Featuring embedded Linux with Gbit Ethernet and USB interfaces,Â- Model P350 Wayback Machine provides 8 analog outputs that can be used independently or synchronously. In Playback mode, any channel can store and play multi-gigabyte user waveform files, with flexible playback rates, summing, filtering, scaling/offset, and phase/timeshift provisions. Two analog inputs and 2 random noise...

Read More »
VME RTD/Resistance Input Module features 16 independent channels.
Test & Measurement

VME RTD/Resistance Input Module features 16 independent channels.

AbleÂ- to measure 1 Ω to 3 MΩ, V410 features 16 independent channels configurable for 2-, 3-, and 4-wire resistance measurement. Module is suitable for 100 and 1,000 Ω RTDs, thermistors, and other resistive sensors and can also read cryogenic diodes. LUTs are included for 100 and 1,000 Ω, 385 and 392 platinum RTDs, and any channel may be switched to front-panel D9 test connector for...

Read More »
Test & Measurement

Ethernet Time Interval Counter contains 5 time-stampers.

Controlled via 100 Mbit Ethernet and USB interfaces, 5-channel Model T680 is suited for industrial and laboratory test and measurement. Each channel can snapshot time of rising edge of one electrical input, to 12.2 ps resolution with 48-bit range. In time-stamp mode, individual time stamps may be read, and in TIC mode, channel 0 may be used as start time reference for channels 1–4, with option...

Read More »
New P348 Quadrature Modulator Comes with Half-Rack Mounting Option
Electronic Components & Devices

New P348 Quadrature Modulator Comes with Half-Rack Mounting Option

Suitable for range of transducer simulation, including eddy-current, inductive, and capacitive sensors, or classic RF modulation tasks. Offers carrier frequency ranging from 500 KHz to 20 MHz, and modulation capability is suitable for hardware simulation of vibration, clearance, or gear tooth/blade tip sensors. Features isolated inputs and outputs, signal monitor outputs, and high linearity, wide...

Read More »
Highland Offers P545 Simulation/Acquisition Module with Effective Travel Limit-Stop Functions and Forced Overrides
Controls & Controllers

Highland Offers P545 Simulation/Acquisition Module with Effective Travel Limit-Stop Functions and Forced Overrides

Features 12 independent isolated i/o channels each can be sine wave excitation source or a an input measurement channel. Can be used as 12-channel programmable sine wave source and AC voltmeter with 0 to 32 volts RMS range. Allows independent controlling of channels and is designed for synchro, resolver, RVDT and LVDT type magnetic rotation and position sensors.

Read More »
New P330 Aerospace Sensor Simulator Allows Glitch-free Level Simulation to 1% Accuracy with 16-Bit Resolution on Capacitance and Resistance
Test & Measurement

New P330 Aerospace Sensor Simulator Allows Glitch-free Level Simulation to 1% Accuracy with 16-Bit Resolution on Capacitance and Resistance

Simulate capacitive oil or fuel level sensors and includes built-in self-test. Supports simulation of two tank level sensors with reference electrodes and provides sensor/cable fault simulation. Four independent isolated channels can each simulate both capacitance and resistance, from 5 pF to 5000 pF and 5K ohms to over 10 Megs.

Read More »
P620 Resistance Simulator features USB and Ethernet interfaces.
Test & Measurement

P620 Resistance Simulator features USB and Ethernet interfaces.

Providing monotonic resistance changes, P620 Resistance Simulator includes isolated channels for simulating platinum RTDs and 5 ohms to 5 Mohms resistances. Featuring built in self test, unit allows loopback checking and automatic self test. Eliminating transient errors in relay switching, simulator allows calibration by DVM without disturbing connections to the equipment.

Read More »
Compact Precision Laser Driver offers multimodal operation.
Construction Equipment and Supplies

Compact Precision Laser Driver offers multimodal operation.

Along with DC-coupled trigger signal that produces 2 nsec transitions, D200 offers up to 4 A of regulated drive current that supports lasers with forward voltages up to 9 V. Built-in edge-triggered pulse generator provides up to 1 Â-µsec pulse widths, while pulse-follower mode, also provided, accommodates externally-defined trigger widths up to 100% duty CW. Power, pulse width, drive...

Read More »
Waveform Playback Unit supports aerospace simulation testing.
Agricultural & Farming Products

Waveform Playback Unit supports aerospace simulation testing.

Featuring embedded Linux with Gbit Ethernet and USB interfaces,Â- Model P350 Wayback Machine provides 8 analog outputs that can be used independently or synchronously. In Playback mode, any channel can store and play multi-gigabyte user waveform files, with flexible playback rates, summing, filtering, scaling/offset, and phase/timeshift provisions. Two analog inputs and 2 random noise...

Read More »
VME RTD/Resistance Input Module features 16 independent channels.
Test & Measurement

VME RTD/Resistance Input Module features 16 independent channels.

AbleÂ- to measure 1 Ω to 3 MΩ, V410 features 16 independent channels configurable for 2-, 3-, and 4-wire resistance measurement. Module is suitable for 100 and 1,000 Ω RTDs, thermistors, and other resistive sensors and can also read cryogenic diodes. LUTs are included for 100 and 1,000 Ω, 385 and 392 platinum RTDs, and any channel may be switched to front-panel D9 test connector for...

Read More »
Test & Measurement

Ethernet Time Interval Counter contains 5 time-stampers.

Controlled via 100 Mbit Ethernet and USB interfaces, 5-channel Model T680 is suited for industrial and laboratory test and measurement. Each channel can snapshot time of rising edge of one electrical input, to 12.2 ps resolution with 48-bit range. In time-stamp mode, individual time stamps may be read, and in TIC mode, channel 0 may be used as start time reference for channels 1–4, with option...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers