ETCO
Bradenton, FL 34203
Electrical Connector clicks to validate proper attachment.
Vibration-resistant, unisex style ETCO FlatSnap-® connector clicks to validate proper attachment and remains attached during assembly, shipment, and final setup. Design prevents wire harnesses from pulling out and shaking loose, reducing field service incidents. Installed using simple push-pull motion, ccnnector is available in 0.032 x 0.250 in. and other sizes made from nickel plated steel and...
Read More »
Ignition Wire Booter applies boots to terminated wires.
Straight Booter runs on shop air and is used for applying rubber insulator boots to terminated spark plug and distributor wire assemblies. Measuring 19 x 5 x 5 in., bench-top device is powered by twin rod guided pneumatic cylinder. Minimal tooling changes are required for depth of boot insertion, and flow control valves permit adjustments to different boot and terminal combinations. Foot pedal...
Read More »Electronics Terminals feature dual-gauge materials.
ETCO Specialty Terminals featuring dual-gauge materials can combine 2 functions, such as rigid tab or connector with formable ear section mating end. They are suitable for designing terminals and connectors incorporating multiple bends and forms. Allowing engineers to specify parts 0.032 in. thick on one end and 0.016 in. thick at other end, units can be fabricated from any alloy in sizes from...
Read More »
Automotive Ignition Set fits 7 and 8 mm ignition wire.
Suitable for all GM V/8 and V/6 engines from 1997 through current production, GM Ignition Set provides fully integrated solution for OEMs and second tier automotive suppliers. It combines CB-67 silicone boot for dielectric seal, FE-1 nylon ferrule with locking tang for connection and positive terminal location, and DT-75 stainless steel terminal with tempered spring clip that connects securely to...
Read More »
Custom Terminals meet needs of mid-volume customers.
ETCO Custom Electric Terminals come in stock widths up to 1.75 in. and thickness up to 0.030 in. Supplied loose or in strip form, they can include blades for plugs, terminals, male/female PCB connects, ring terminals, receptacles, and wire splices in 25,000 minimum quantities. Terminals can be made from materials such as brass, tinned brass, nickel plated steel, copper plated steel,...
Read More »
Spark Plug Boot is for General Motors V/8 engines.
GM Spark Plug Boot is made of silicone, rated for 7 mm cable, and exactly matches original GM equipment. Suitable for all V/8's since 1997 and V/6's from 1998, it is supplied in standard black color, but can be molded in custom colors and in high temperature rated silicone for high performance applications.
Read More »
Bender-Booter produces finished ignition wire assemblies.
ECTO Bender-Booter applies boot to terminated ignition wire and bends it to produce 45 and 90 deg angled or straight boots. Featuring dual palm-button actuation for operator safety, air-powered unit is capable of processing up to 100 wire assemblies per hr. Measuring 24 x 18 in., it is designed to bend and boot ETCO CB2, CB3, AB16, CB8, AB15, and AB20 boots, along with DT2000LB, DT207LB, DT200B,...
Read More »
Wire Terminal Applicator offers single stroke operation.
Designed for producing fire-retardant insulated disconnects, ETCO Insulated Mighty-Mini Wire Terminal Applicator is air-operated device that applies F-crimp to disconnect on down stroke and adds fire-retardant nylon insulator on way back up. It can produce up to 5,000 terminations/hr. Featuring 1-piece cast body and rigid, thick base, it is suited for use with automatic equipment and manual bench...
Read More »
Electrical Splice features unisex, self-locking disconnect.
Designed with large surface contact area, Flat-Snap(TM) Splice can rapidly mate and unmate without force or performance degradation, and cannot pull apart or vibrate loose under adverse conditions. Unisex design facilitates assembly, inventory, and repairs, and prevents accidental disconnection. Offered in 0.012-0.020 in. thick brass, splice can be modified to OEM requirements as posi-loc...
Read More »Custom-Built Assembly Equipment produces finished parts.
Custom Assembly Equipment can produce finished electrical and electronic parts by combining multiple functions, such as bending, brazing, welding, crimping, cutting, inserting, and attaching components. Capable of 3,000 parts/hr throughput, fully programmable equipment can introduce stamped metal lead frames from reel, press-fit them onto ceramic insulators, and attach and terminate wire leads....
Read More »ETCO Begins Manufacturing of Pancon Electrical Terminals
March 11, 2020 - - Bradenton, FL - - The ETCO Corporation, today announced that it will begin manufacturing Pancon’s electric terminal product line. Pancon has phased out production in its two manufacturing facilities in Massachusetts and California. ETCO has purchased many of Pancon’s dies which allows ETCO to serve the production needs of former Pancon customers and help minimize any...
Read More »ETCO Incorporated Celebrates 70 Years of Manufacturing within the United States
ETCO Incorporated is celebrating 70 years of operating independently as a manufacturer of custom precision stampings. The company has manufactured these products in Rhode Island since its inception in 1947 and at its automotive headquarters in Bradenton, Florida since 1978. The products engineered and manufactured by ETCO have been used in over 500 million end use applications since the first...
Read More »ETCO Incorporated Announces 97% Manufacturing Supplier Scorecard Average for Second Quarter
Manufacturer of custom precision stampings for automotive, appliance and medical device industries announces increase in supplier scorecard average from 95% to 97% ETCO Incorporated announced that it has achieved a 97% manufacturing vendor rating from external surveys given to manufacturers from various industries it supplies. The company saw an increase in its already high rating of 95% to an...
Read More »
Electrical Connector clicks to validate proper attachment.
Vibration-resistant, unisex style ETCO FlatSnap-® connector clicks to validate proper attachment and remains attached during assembly, shipment, and final setup. Design prevents wire harnesses from pulling out and shaking loose, reducing field service incidents. Installed using simple push-pull motion, ccnnector is available in 0.032 x 0.250 in. and other sizes made from nickel plated steel and...
Read More »Guide to Quality Crimps Poster Describes Wire, Connectors and Tooling
A new poster that explains in English, Spanish and Chinese the function and interaction between a wire, connectors and tooling to assure quality crimps is being offered by ETCO Incorporated of Warwick, Rhode Island, U.S.A. The ETCO Guide to Quality Crimps Poster explains the relationship between a wire, connector and tooling to assure the production of high quality F and B crimps. Fully...
Read More »New ETCO Web Site Features Connectors, Terminals & Applicators
A new web site that describes a full range of standard and custom connec-tors, terminals, and application equipment for a wide range of industries is being introduced by ETCO Incorporated of Warwick, Rhode Island. The ETCO Web site features four major sections: standard-, engineered-, automotive-products, and applications equipment and describes the firm's two manufacturing divisions. Providing...
Read More »
Ignition Wire Booter applies boots to terminated wires.
Straight Booter runs on shop air and is used for applying rubber insulator boots to terminated spark plug and distributor wire assemblies. Measuring 19 x 5 x 5 in., bench-top device is powered by twin rod guided pneumatic cylinder. Minimal tooling changes are required for depth of boot insertion, and flow control valves permit adjustments to different boot and terminal combinations. Foot pedal...
Read More »Electronics Terminals feature dual-gauge materials.
ETCO Specialty Terminals featuring dual-gauge materials can combine 2 functions, such as rigid tab or connector with formable ear section mating end. They are suitable for designing terminals and connectors incorporating multiple bends and forms. Allowing engineers to specify parts 0.032 in. thick on one end and 0.016 in. thick at other end, units can be fabricated from any alloy in sizes from...
Read More »
Automotive Ignition Set fits 7 and 8 mm ignition wire.
Suitable for all GM V/8 and V/6 engines from 1997 through current production, GM Ignition Set provides fully integrated solution for OEMs and second tier automotive suppliers. It combines CB-67 silicone boot for dielectric seal, FE-1 nylon ferrule with locking tang for connection and positive terminal location, and DT-75 stainless steel terminal with tempered spring clip that connects securely to...
Read More »
Custom Terminals meet needs of mid-volume customers.
ETCO Custom Electric Terminals come in stock widths up to 1.75 in. and thickness up to 0.030 in. Supplied loose or in strip form, they can include blades for plugs, terminals, male/female PCB connects, ring terminals, receptacles, and wire splices in 25,000 minimum quantities. Terminals can be made from materials such as brass, tinned brass, nickel plated steel, copper plated steel,...
Read More »