Rex-Cut Abrasives

Fluid & Gas Flow Equipment

Mounted Points Kit lets user match abrasive application.

Packaged in plastic storage box, Mounted Point Combi Kit includes resin bonded cotton fiber mounted points for deburring, latex bonded cotton fiber units for light deburring and polishing, and soft unitized synthetic fiber mounted points for high polishing. Each cotton fiber or unitized mounted point is impregnated with aluminum oxide or silicon carbide abrasive, which is bonded and compressed...

Read More »
Fluid & Gas Flow Equipment

Mounted Abrasive Points reach deep into cavities.

Suited for repair of molds, tools, and dies, Rex-Cut® Mounted Points provide controlled grinding action by constantly revealing fresh abrasives. They are made with multiple layers of non-woven cotton fiber and aluminum oxide or silicon carbide abrasive grains that are pressed and bonded into barrel, bullet, and round shapes. Offered with choice of grit sizes and hard or soft bonds, points...

Read More »
Fluid & Gas Flow Equipment

Abrasive Grind and Blend Kit removes heavy welds.

Rex-Cut® Grind and Blend Kit includes Sigma Green wheel with zirconia-ceramic grain and proprietary bonding to aggressively grind-out cracks and remove welds. It also features Cotton Fiber Type 27 blending and finishing wheel, which leaves 32 RMS or better finish on stainless steel and also works on aluminum. Packaged in clamshell, kit's two 4Â-½ in. dia wheels are offered with or...

Read More »
Cotton Fiber Discs grind and finish aluminum in one step.
Cleaning Products & Equipment

Cotton Fiber Discs grind and finish aluminum in one step.

Non-loading Rex-Cut® Quick Change Discs are constructed with multiple layers of non-woven cotton fiber impregnated with aluminum oxide or silicon carbide grains. For use on flat or contoured surfaces, construction ensures products constantly reveal fresh abrasives as they grind. Discs, offered in 1, 1Â-½, 2, and 3 in. sizes, are rigid enough to get into corners and are available with...

Read More »
Abrasive Grinding Wheels promote weld integrity.
Fluid & Gas Flow Equipment

Abrasive Grinding Wheels promote weld integrity.

Sigma Green Grinding Wheels provide metal removal on stainless steel, inconel, titanium, and other highly alloyed materials. Virtually contaminant-free, units contain only 0.035% iron and less than 0.1% of iron, chlorine, and sulfur combined. Featuring zirconia-ceramic grain and bonding that helps prevent corrosion, wheels grind out cracks and blend butt-, pad-, fillet-, and window welds. Sizes...

Read More »
Finishing Sticks provide controlled deburring.
Mechanical Components and Assemblies

Finishing Sticks provide controlled deburring.

Hand-Held Finishing Sticks are made from reinforced non-woven cotton fiber and abrasive grains, bonded and pressed together to constantly reveal fresh abrasives as they work. Capable of deburring, edge-breaking, removing parting lines from molds, and finishing in one step, sticks come in variety of sizes to fit holes and slots precisely. Round sticks are available 3/16 x 4 in. to Â-½ x 4 in....

Read More »
Carbide Bur Kit comes in protective oak box.
Material Handling & Storage

Carbide Bur Kit comes in protective oak box.

Carbide Bur Kit features 8 styles of double-cut carbide burs including ball nose, ball, bur tree, cone, cylinder, ball nose tree, flame ball nose, and cylinder with industry standard SCTI numbers. They are suitable for metal removal, weld preparation, deburring, chamfering, edge breaking, and for creating radii on all hard metals. Measuring 5 x 3 x 3Â-½ in., protective oak box can fit on...

Read More »
Carbide Burs enable smooth operator control.
Material Handling & Storage

Carbide Burs enable smooth operator control.

Heat- and wear-resistant Rex-Cut® Double-Cut Carbide Burs perform heavy, fast stock removal with minimal vibration. Products come in straight shapes for deburing edges, conical shapes for working in corners, and ball shapes for deburing radii. They are offered in industry-standard sizes with 1/8 and 1/4 in. shanks. Torque-tested units can be used on stainless steels, titanium, inconel, cast...

Read More »
Abrasive Wheels allow high-speed operation in die grinders.
Fluid & Gas Flow Equipment

Abrasive Wheels allow high-speed operation in die grinders.

T1 Abrasive Wheels feature non-woven cotton fabric with aluminum oxide abrasives that are laminated, pressed, and bonded together with fiberglass reinforcement. They feature 4 grit sizes and are available in 2, 2Â-½, and 3 in. dia., 1/16, 1/8, and ¼ in. thickness, and 1/4 or 3/8 in. bore. Wheels are rated for 28,000, 24,000, and 20,000 rpm. Options include soft bond for light...

Read More »
Abrasive Points blend and finish welded fabrications.
Fluid & Gas Flow Equipment

Abrasive Points blend and finish welded fabrications.

MX Plus(TM) Cotton Fiber Mounted Points are impregnated with aluminum oxide abrasives and are available in coarse, medium, and fine grits. Featuring smooth operator control, without chatter or vibration, they are capable of leaving 32 RMS surface finish on stainless steel and aluminum. Points can blend corner welds, debur holes, and break edges without removing base metal. They come in 25 shapes...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers