Analog Devices, Inc.

Communication Systems & Equipment

Broadband Demodulator combines 5 devices, 3 RF functions.

Combining 5 devices and 3 RF functions in one SMT chip, ADRF6850 operates over 100-1,000 MHz range and supports narrow and wideband signal modes up to 250 MHz. It conserves board space and simplifies development by integrating 60 dB variable gain amplifier, fractional-N PLL synthesizer with VCO, and 2 baseband ADC drivers in 8 x 8 mm LFCSP package. RF performance is optimized with input IP3 of...

Read More »
Agricultural & Farming Products

Digital Isolators provide 4 independent data isolation channels.

Housed in surface mount 20-lead SSOP, ADuM347x Series integrates transformer driver and PWM controller in single package. Devices enable designers to implement isolated DC/DC converter that provides up to 2 W of regulated, isolated power at 3.3-30 Vdc from 5.0 or 3.3 V input supply. Using iCoupler technology, which is based on chip-scale transformers, units offer 2,500 Vrms isolation and are...

Read More »
Communication Systems & Equipment

CAN Transceivers isolate signals and power.

ADM3052/3 isolate data signals and power for systems using CAN (control-area network) communications bus. Both utilize iCoupler digital isolation technology, and ADM3053 also includes isoPower integrated, isolated dc-to-dc converter. Respectively, ADM3052 and ADM3053 offer 5 and 2.5 kVrms isolation between 4- and 2-wire CAN-bus configuration and analog MCU or DSP. Products are available in small,...

Read More »
Communication Systems & Equipment

Analog Devices Variable Gain Amplifiers Provide Unprecedented Levels of Performance and Integration at RF and IF Frequencies

Highly integrated SiGe BiCMOS and GaAs RF/IF variable gain control amplifiers combine multiple functions in single chip, achieving significant BOM savings and breakthrough radio performance. NORWOOD, Mass. - Analog Devices, Inc. (NYSE: ADI), a global leader in high-performance semiconductors for signal-processing applications and RF integrated circuits, today introduced a series of highly...

Read More »
Electrical Equipment & Systems

16-bit ADC offers sampling rate of 250 MS/sec.

Featuring on-chip IF sampling circuit and buffered analog inputs, Model AD9467 offers 16-bit resolution, spurious-free dynamic range up to 100 dBFs, and signal-to-noise ratio performance of 76.4 dBFS. Signal bandwidths up to 300 MHz enable advances in radar systems, spectrum analyzers, and multi-carrier, multi-mode receiver designs for wireless infrastructure. Housed in Pb-free, 72-lead, LFCSP,...

Read More »
Computer Hardware & Peripherals

Digital Signal Processor offers 800 MMACs/400 MHz performance.

Housed in 9 x 9 mm 64-lead LFCSP package, Blackfin ADSP-BF592 features active power draw as low as 88 mW at 300 MHz and standby power of less than 1 mW, extending battery life. Unit includes 2 SPORTs, PPI, 2 SPIs, 4 general-purpose counters, and factory-programmed instruction ROM block containing VDK RTOS and C-runtime libraries. Processor is suited for portable medical products, audio devices,...

Read More »
Pocket-Sized CPR Rescue Device Enabled by Analog Devices' MEMS Motion Sensing Technology
Machinery & Machining Tools

Pocket-Sized CPR Rescue Device Enabled by Analog Devices' MEMS Motion Sensing Technology

o Affordably Priced PocketCPR from ZOLL Medical Corporation Uses ADI's iMEMS Accelerometer to Measure Chest Compressions and Aid Rescuers NORWOOD, Mass. -- Analog Devices, Inc. (NYSE: ADI) today announced that ZOLL Medical Corporation (Nasdaq GS: ZOLL) has selected ADI's high performance iMEMS® technology to enable its palm-sized CPR (cardiopulmonary resuscitation) device that measures the...

Read More »
Agricultural & Farming Products

Automotive-Grade I2C Isolators simplify hybrid-electric designs.

Based on iCoupler® technology, ADuM1250W directly isolates bi-directional data, eliminating need to split transmit and receive signals into separate channels. This hot-swappable, 1 MHz dual IÂ-²C digital isolator reduces component count in electric and hybrid-electric vehicles by eliminating need for optocouplers and support circuitry. It is qualified to AEC-Q100 and operates over -40...

Read More »
Architectural & Civil Engineering Products

Wireless Development Platform streamlines base station design.

To facilitate wireless infrastructure design, MS-DPD (mixed-signal, digital pre-distortion) platform lets OEMs assess and reprogram radio to remove non-linearities from transmit paths and enhance radio power efficiency. RF and mixed-signal transmit and observation receiver chain supports 2G, 3G, and emerging 4G wireless protocols. Enabling FPGA to be used to implement required radio algorithms,...

Read More »
Electrical Equipment & Systems

High Voltage Switches have latch-up proof design.

Offering switching times to 170 ns, ADG5412 and ADG5413 ensure latch-up prevention in industrial applications operating up to ±20 V. Both models contain 4 independent SPST switches and achieve 8 kV HBM (human body model) ESD rating. Each switch conducts equally well in both directions when on and has input signal range that extends to power supplies. In OFF condition, signal levels up to...

Read More »

All Topics