Analog Devices, Inc.
P.O. Box 9106
Norwood, MA 02062
Share:
Converters measure capacitance and impedance.
With 24-bit resolution and 1 mA max power, Model AD7745 is software configurable and integrates all stages of capacitance-to-digital conversion on one chip. Software programmable output data rate can be varied from 5-90 Hz. Impedance-to-digital converter, Model AD5933 combines direct digital synthesis, analog-to-digital conversion, and digital signal processing, allowing external complex...
Read More »
Clock ICs deliver sub-picosecond jitter performance.
Clock distribution devices eliminate need for multiple discrete components with integration of 1.5 GHz PLL frequency synthesizer core, programmable dividers, and adjustable delay blocks. Clock distribution ICs AD9510, AD9511, and AD9512 feature 4, 3, and 3 LVPECL outputs, respectively, as well as user-selectable LVDS and CMOS options. Model AD9510 has 8 programmable dividers and 2 programmable...
Read More »
Data Converters come in 2.9 x 2.8 mm SOT-23 package.
Available in 8-lead packaging, nanoDAC(TM) AD5060 and AD5660 digital-to-analog converters offer 16-bit data conversion while integrating additional circuit components on-chip. Model AD5060 delivers 1 LSB max linearity error (INL), including its on-chip output buffer amplifier for open loop systems. For closed loop systems, AD5660 contains integrated 10 ppm/Ã-
Read More »
Line Driver delivers video signals over twisted pair cable.
Manufactured on XFCB bipolar process, AD8133 triple differential line driver is integrated into 4 x 4 mm package. With 225 MHz large signal bandwidth and 1,600 V/Ã-µs slew rate, it enables engineers needing to drive RGB signals over twisted-pair cable to eliminate use of multiple-chip solutions. Internal common-mode feedback provides output gain and phase balance of -60 dB @ 50 MHz,...
Read More »
Data Converters deliver 18- and 20-bit resolution.
At 2 MSPS, 18-bit Model AD7641 features typical nonlinearity of 2 LSB and SNR of 93 dB. It operates from 2.5 V supply and provides internal conversion clock, internal reference buffer, error correction circuits, and serial and parallel interface ports, while eliminating need for discrete, low noise programmable gain amplifier. High-speed, 20-bit, Model AD7760 provides sigma delta conversion and...
Read More »
Variable Gain Amplifier targets medical ultrasound systems.
Model AD8335 has 4 channels, each with ultra-low noise preamplifier, X-AMPÃ-® VGA, and gain control interface. Featuring single-ended input and differential or single-ended outputs, preamplifier provides accurate noise performance with active impedance match set by external feedback resistor. Available in 9 x 9 mm 64-lead LFCSP, Model AD8335 operates from single 5 V supply, consuming 92...
Read More »Sigma-Delta A/D Converters feature low noise and low power.
Series AD779x 16- and 24-bit converters, for industrial/medical instrumentation, offer 40 nVrms noise and 400 Ã-µA power characteristics. Operating with 2.7-5.25 V power supply, products feature software-programmable output data rate, variable from 4-500 Hz. At 16.6 Hz, they offer simultaneous rejection of 50 Hz and 60 Hz signals. Each product is comprised of sigma-delta A/D converter,...
Read More »Mixed Signal DSP suits embedded control applications.
Model ADSP-21992 Digital Signal Processor (DSP) integrates 160 million instructions per second (MIPS), 16-bit, ADSP-219x DSP core, with 481 words of on-chip RAM; 8-channel, 14-bit, 20 million samples per second analog-to-digital converter, with dual sample-and-hold amplifiers; and 3-phase PWM generator. CAN interface conforms to CAN V2.0B and includes standard 11-bit and extended 29-bit...
Read More »Digital Signal Processor operates at 250 MHz.
ADSP-TS101S TigerSHARC DSP offers 250 MHz clock rate, 1500 MFLOPS performance and native support for 8, 16, 32, and 40-bit data types. It has 1.5 W power dissipation, 6 Mbit of on-chip memory, 14 channel zero-overhead DMA engine, integrated SDRAM controller, parallel host interface, cluster multiprocessing support, and link port multiprocessing support. Applications include data acquisition,...
Read More »Digital Signal Processor is for motor control applications.
DashDSP ADMCF34x series combines DSP control and mixed-signal integration, providing 30% reduction in system components. Its analog front end integrates bipolar current sense amplifiers with programmable sample-and-hold capability for simultaneous sampling of up to 3 channels. DSP has 13 analog and 25 digital I/O channels for use with permanent magnet brushless dc, ac induction, permanent magnet...
Read More »