Analog Devices, Inc.
P.O. Box 9106
Norwood, MA 02062
Share:
Analog Devices Launches New Transceiver Series with Car Camera Bus Technology
Analog Devices’ Transceiver Series include ADV7990 and ADV7991 transmitters and ADV7380 and ADV7381 receivers. The units have a negligible latency with uncompressed transmission and bidirectional control channel. They support pixel rate of (75 MHz Y, 75 MHz) and can be operated in -40°C to +105°C temperature range. These transceivers enable high-definition video via unshielded twisted pair...
Read More »
Analog Devices Presents Linear LT8708/-1 Regulator Controller with Six Independent Forms of Regulation
The Linear™ LT8708/-1 Bidirectional Buck-Boost Switching Regulator Controller is offered in 5 mm x 8 mm QFN-40 package and can operated in –40 to 125°C temperature range. The unit is operated with a single inductor over a 2.8 V to 80 V input voltage range and delivers an output voltage from 1.3 V to 80 V. It allows user to set the current limits independently using four resistors. The...
Read More »New Power Management Solution Provides Up to Five High Efficiency Low Quiescent Current Outputs
The new Power by Linear™ LTC3372 from Analog Devices, Inc. offers a power management solution for systems requiring multiple low voltage outputs. The combination of a 60V synchronous buck switching regulator controller and four configurable synchronous monolithic buck regulators allows for up to five high efficiency low quiescent current outputs. These outputs can be porgrammed to either...
Read More »
New ADF5610 Microwave Synthesizer Offers RF Outputs from 55 MHz to 15 GHz
Analog’s ADF5610 Microwave fractional-N Synthesizer is developed on SiGe BiCMOS process. Unit features normalized phase noise floor (FOM) of -229 dBc/Hz, VCO phase noise of -114 dBc/Hz at 100 kHz offset and -165 dBc/Hz at 100 MHz offset both at 10GHz. Unit can be operated in -40°C to +85°C temperature range with nominal voltage of 3.3 V analog or 5 V charge-pump. The synthesizer comes with...
Read More »
New ADuCM355 Microcontroller Features Integrated Analog Hardware Accelerators
Analog’s ADuCM355 Microcontroller comes with bio-sensor and chemical sensor interface and is suitable for applications such as industrial gas sensing, instrumentation, vital signs monitoring and disease management. Unit offers measurement of voltage, current and impedance and supports dual potentiostat (8.5uA, 1.6uV RMS) and more than 3 sensor electrodes. ADuCM355 features 26 MHz core, 128kB...
Read More »
Latest ADRV9009 RF Transceiver Offers a Bandwidth of 200 MHz
Analog Device’s ADRV9009 RF Transceiver is designed to meet rigorous antenna density and expanded network capacity requirements. Unit provides 75 MHz to 6 GHz tunable frequency range that supports 2G/3G/4G/5G services. The transceiver allows designers to meet escalating radio-channel-count requirements of 5G massive MIMO equipment. Unit is offered in 12 x 12 BGA package and simplifies digital...
Read More »
New AD5758 Digital-to-Analog Converter Comes with Dynamic Power Control
AD5758 Digital-to-Analog Converter is suitable for applications in factory automation, process automation, and motor control. Unit is offered in 5 mm x 5 mm footprint and features output fault protection circuits and built-in miswire protection. The DAC offers 0.05% TUE and come with advanced integrated diagnostic features.
Read More »
Analog Devices' Regulator Now Comes in Wide Voltage Range
Power by Linear™ LTM4661 from Analog Devices Inc. is a low power step-up µModule® regulator measuring 6.25mm-by-6.25mm-by-2.42mm. It is a minimal design that uses a few capacitors and one resistor. Single-sided PCBs are less than 1cm² and dual-sided PCBs are 0.5cm². Input voltage ranges from 1.8V to 5.5V. Output voltage ranges from 2.5V to 15V. Other features include inrush current limit,...
Read More »
LTM4646 μModule Regulator features on-board remote sense amplifiers.
LTM4646 μModule Point-of-Load Regulator is suitable for PCIe boards, communication infrastructure, cloud computing-based systems, medical and industrial equipment. Unit consists of inductors, MOSFETs, a DC/DC controller and supporting components and come in 11.25mm x 15mm x 5.01mm BGA package. Regulator is operated on 4.5 to 20 V input voltage and delivers an adjustable voltage from 0.6 to 5.5...
Read More »
LTC3351 Supercapacitor Backup Power Controller features 2-wire I²C interface.
LTC3351 Supercapacitor Backup Power Controller is offered in 4mm x 7mm 44-Lead QFN package. Unit comes with synchronous step-down controller, hot swap controller and circuit breaker that use N-channel MOSFETS. LTC3351 performs functions such as PowerPath™ control, protection and capacitor health monitoring. Product is operated in –40°C to 125°C temperature range with 4.5 to 35 V input...
Read More »
Analog Devices Launches New Transceiver Series with Car Camera Bus Technology
Analog Devices’ Transceiver Series include ADV7990 and ADV7991 transmitters and ADV7380 and ADV7381 receivers. The units have a negligible latency with uncompressed transmission and bidirectional control channel. They support pixel rate of (75 MHz Y, 75 MHz) and can be operated in -40°C to +105°C temperature range. These transceivers enable high-definition video via unshielded twisted pair...
Read More »
Analog Devices Presents Linear LT8708/-1 Regulator Controller with Six Independent Forms of Regulation
The Linear™ LT8708/-1 Bidirectional Buck-Boost Switching Regulator Controller is offered in 5 mm x 8 mm QFN-40 package and can operated in –40 to 125°C temperature range. The unit is operated with a single inductor over a 2.8 V to 80 V input voltage range and delivers an output voltage from 1.3 V to 80 V. It allows user to set the current limits independently using four resistors. The...
Read More »New Power Management Solution Provides Up to Five High Efficiency Low Quiescent Current Outputs
The new Power by Linear™ LTC3372 from Analog Devices, Inc. offers a power management solution for systems requiring multiple low voltage outputs. The combination of a 60V synchronous buck switching regulator controller and four configurable synchronous monolithic buck regulators allows for up to five high efficiency low quiescent current outputs. These outputs can be porgrammed to either...
Read More »
New ADF5610 Microwave Synthesizer Offers RF Outputs from 55 MHz to 15 GHz
Analog’s ADF5610 Microwave fractional-N Synthesizer is developed on SiGe BiCMOS process. Unit features normalized phase noise floor (FOM) of -229 dBc/Hz, VCO phase noise of -114 dBc/Hz at 100 kHz offset and -165 dBc/Hz at 100 MHz offset both at 10GHz. Unit can be operated in -40°C to +85°C temperature range with nominal voltage of 3.3 V analog or 5 V charge-pump. The synthesizer comes with...
Read More »
New ADuCM355 Microcontroller Features Integrated Analog Hardware Accelerators
Analog’s ADuCM355 Microcontroller comes with bio-sensor and chemical sensor interface and is suitable for applications such as industrial gas sensing, instrumentation, vital signs monitoring and disease management. Unit offers measurement of voltage, current and impedance and supports dual potentiostat (8.5uA, 1.6uV RMS) and more than 3 sensor electrodes. ADuCM355 features 26 MHz core, 128kB...
Read More »
Latest ADRV9009 RF Transceiver Offers a Bandwidth of 200 MHz
Analog Device’s ADRV9009 RF Transceiver is designed to meet rigorous antenna density and expanded network capacity requirements. Unit provides 75 MHz to 6 GHz tunable frequency range that supports 2G/3G/4G/5G services. The transceiver allows designers to meet escalating radio-channel-count requirements of 5G massive MIMO equipment. Unit is offered in 12 x 12 BGA package and simplifies digital...
Read More »
New AD5758 Digital-to-Analog Converter Comes with Dynamic Power Control
AD5758 Digital-to-Analog Converter is suitable for applications in factory automation, process automation, and motor control. Unit is offered in 5 mm x 5 mm footprint and features output fault protection circuits and built-in miswire protection. The DAC offers 0.05% TUE and come with advanced integrated diagnostic features.
Read More »
Analog Devices' Regulator Now Comes in Wide Voltage Range
Power by Linear™ LTM4661 from Analog Devices Inc. is a low power step-up µModule® regulator measuring 6.25mm-by-6.25mm-by-2.42mm. It is a minimal design that uses a few capacitors and one resistor. Single-sided PCBs are less than 1cm² and dual-sided PCBs are 0.5cm². Input voltage ranges from 1.8V to 5.5V. Output voltage ranges from 2.5V to 15V. Other features include inrush current limit,...
Read More »
LTM4646 μModule Regulator features on-board remote sense amplifiers.
LTM4646 μModule Point-of-Load Regulator is suitable for PCIe boards, communication infrastructure, cloud computing-based systems, medical and industrial equipment. Unit consists of inductors, MOSFETs, a DC/DC controller and supporting components and come in 11.25mm x 15mm x 5.01mm BGA package. Regulator is operated on 4.5 to 20 V input voltage and delivers an adjustable voltage from 0.6 to 5.5...
Read More »
LTC3351 Supercapacitor Backup Power Controller features 2-wire I²C interface.
LTC3351 Supercapacitor Backup Power Controller is offered in 4mm x 7mm 44-Lead QFN package. Unit comes with synchronous step-down controller, hot swap controller and circuit breaker that use N-channel MOSFETS. LTC3351 performs functions such as PowerPath™ control, protection and capacitor health monitoring. Product is operated in –40°C to 125°C temperature range with 4.5 to 35 V input...
Read More »
