Ametek Crystal Engineering Corp.

AMETEK STC's HPC50 Calibrator Receives CSA Intrinsic Safety Rating for North American Markets
Test & Measurement

AMETEK STC's HPC50 Calibrator Receives CSA Intrinsic Safety Rating for North American Markets

SAN LUIS OBISPO, CA, Oct. 30, 2019 – AMETEK STC is pleased to announce that the HPC50 Handheld Pressure Calibrator released earlier this year now has a CSA Intrinsic Safety rating, expanding its availability to the North American Intrinsically Safe market, specifically the Oil and Gas sector. The HPC50 pressure calibrator uses a similar non-menu interface to the one found in the...

Read More »
AMETEK AMERON Expands its Oxygen Overhaul Kit Capabilities
Transportation Industry Products

AMETEK AMERON Expands its Oxygen Overhaul Kit Capabilities

Baldwin Park, CA, Oct. 30, 2019 – AMETEK AMERON recently achieved FAA Parts Manufacturing Approval on the M28022-00 and M806022-02 oxygen bottle overhaul kits, both of which service different assemblies on aircrafts. The M28022-00 kit is used in the overhaul of 5500 and 9700 Series Portable Cylinder Assemblies (PCAs). Meanwhile, the M806022-02 kit services the 898, 807368-01, and 804822-14...

Read More »
AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval
Test & Measurement

AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval

Rugged, light weight temperature calibrator designed for on-board usage. Offers a temperature range of 28 to 650°C (82 to 1202°F), Stability to ± 0.1°C (± 0.18°F), a One-year Accuracy of ± 0.9°C (± 1.62°F) and a Three-year Accuracy of ± 1.8°C (± 3.24°F) for the total temperature range. Colored safety icons make it quick and easy to detect if the calibrator is hot or cold, helping...

Read More »
New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading
Test & Measurement

New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading

Provides time-saving features, like scaling, percent error and flow calculations as well as internal and external pressure modules into a single handheld unit. Memory slots allow storage of up to five screens, simplifying the recall of previously stored settings and user setups. Offers deadweight tester accuracy along with a host of user-friendly features that deliver laboratory accuracy to an...

Read More »
XP2i Digital Pressure Gauges Feature New Automatic Calibration Alerts
Test & Measurement

XP2i Digital Pressure Gauges Feature New Automatic Calibration Alerts

The XP2i pressure gauge now features a customizable, automatic calibration reminder system. It provides on-screen alerts prior to due dates, warning alerts on and after due dates, and the ability to lock gauges after their calibration due dates. The product is suitable for oil and gas, power generation, food and beverage, plastics, process, chemical, petrochemical, pharmaceutical, and industrial...

Read More »
Test & Measurement

15,000 psi Pressure Comparator and Test Gauge with Advanced Safety Features for Field and Laboratory Use

AMETEK Crystal Engineering's GaugeCalHP and XP2i feature leak-free Crystal Pressure Fittings A new hydraulic pressure comparator with industry-leading safety features and a high-pressure version of its popular XP2i test gauge have been introduced by Crystal Engineering (www.crystalengineering.net). Both the GaugeCalHP pressure comparator and high-pressure XP2i test gauge are rated to 15 000 psi /...

Read More »
Pressure Calibrator records parameters at 10 times/sec.
Test & Measurement

Pressure Calibrator records parameters at 10 times/sec.

Providing accurate data under field conditions, reference-grade nVision can be configured to measure and record 200,000 pressure, temperature, current, and voltage measurements. Unit can display recorded data graphically, or graph measurements as they are being recorded. Pressure measurement accuracy is up to 0.025% of reading throughout operating temperature range of -20 to 50°C. Featuring...

Read More »
Differential Pressure Gauge provides 0.1% accuracy.
Test & Measurement

Differential Pressure Gauge provides 0.1% accuracy.

Intrinsically safe and ATEX certified, wet/wet Model XP2i-DP features burst disc that protects sensor from over-pressure on low side connection. Digital gauge provides datalogging capabilities and can be programmed for custom engineering units. Available in panel mounting and portable configurations, unit is tested and calibrated inside environmental test chambers using computer-controlled...

Read More »
Test & Measurement

Digital Pressure Gauge is fully temperature compensated.

Model M1 Digital Pressure Gauge provides 0.2% of reading accuracy over entire operating temperature range. Gauge is tested and calibrated inside environmental test chamber using computer controlled pressure controllers and can be used to measure vacuum. Available with protective thermo plastic boot, CE certified product can survive being dropped and subjected to large over-pressure events with no...

Read More »
AMETEK STC's HPC50 Calibrator Receives CSA Intrinsic Safety Rating for North American Markets
Test & Measurement

AMETEK STC's HPC50 Calibrator Receives CSA Intrinsic Safety Rating for North American Markets

SAN LUIS OBISPO, CA, Oct. 30, 2019 – AMETEK STC is pleased to announce that the HPC50 Handheld Pressure Calibrator released earlier this year now has a CSA Intrinsic Safety rating, expanding its availability to the North American Intrinsically Safe market, specifically the Oil and Gas sector. The HPC50 pressure calibrator uses a similar non-menu interface to the one found in the...

Read More »
AMETEK AMERON Expands its Oxygen Overhaul Kit Capabilities
Transportation Industry Products

AMETEK AMERON Expands its Oxygen Overhaul Kit Capabilities

Baldwin Park, CA, Oct. 30, 2019 – AMETEK AMERON recently achieved FAA Parts Manufacturing Approval on the M28022-00 and M806022-02 oxygen bottle overhaul kits, both of which service different assemblies on aircrafts. The M28022-00 kit is used in the overhaul of 5500 and 9700 Series Portable Cylinder Assemblies (PCAs). Meanwhile, the M806022-02 kit services the 898, 807368-01, and 804822-14...

Read More »
AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval
Test & Measurement

AMETEK STC Introduces MTC-650A With Improved User Interface and a Three-Year Recalibration Interval

Rugged, light weight temperature calibrator designed for on-board usage. Offers a temperature range of 28 to 650°C (82 to 1202°F), Stability to ± 0.1°C (± 0.18°F), a One-year Accuracy of ± 0.9°C (± 1.62°F) and a Three-year Accuracy of ± 1.8°C (± 3.24°F) for the total temperature range. Colored safety icons make it quick and easy to detect if the calibrator is hot or cold, helping...

Read More »
New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading
Test & Measurement

New HP50 Pressure Calibrator Calibrates Pressure Ranging from Vacuum to 15,000 psi / 1000 bar with Accuracy up to 0.035% of Reading

Provides time-saving features, like scaling, percent error and flow calculations as well as internal and external pressure modules into a single handheld unit. Memory slots allow storage of up to five screens, simplifying the recall of previously stored settings and user setups. Offers deadweight tester accuracy along with a host of user-friendly features that deliver laboratory accuracy to an...

Read More »
XP2i Digital Pressure Gauges Feature New Automatic Calibration Alerts
Test & Measurement

XP2i Digital Pressure Gauges Feature New Automatic Calibration Alerts

The XP2i pressure gauge now features a customizable, automatic calibration reminder system. It provides on-screen alerts prior to due dates, warning alerts on and after due dates, and the ability to lock gauges after their calibration due dates. The product is suitable for oil and gas, power generation, food and beverage, plastics, process, chemical, petrochemical, pharmaceutical, and industrial...

Read More »
Test & Measurement

15,000 psi Pressure Comparator and Test Gauge with Advanced Safety Features for Field and Laboratory Use

AMETEK Crystal Engineering's GaugeCalHP and XP2i feature leak-free Crystal Pressure Fittings A new hydraulic pressure comparator with industry-leading safety features and a high-pressure version of its popular XP2i test gauge have been introduced by Crystal Engineering (www.crystalengineering.net). Both the GaugeCalHP pressure comparator and high-pressure XP2i test gauge are rated to 15 000 psi /...

Read More »
Pressure Calibrator records parameters at 10 times/sec.
Test & Measurement

Pressure Calibrator records parameters at 10 times/sec.

Providing accurate data under field conditions, reference-grade nVision can be configured to measure and record 200,000 pressure, temperature, current, and voltage measurements. Unit can display recorded data graphically, or graph measurements as they are being recorded. Pressure measurement accuracy is up to 0.025% of reading throughout operating temperature range of -20 to 50°C. Featuring...

Read More »
Company News

Crystal Engineering is Awarded Det Norske Veritas Certification

May 6, 2008 San Luis Obispo, CA - Crystal Engineering Corporation, a leading pressure instrumentation company, announces that it has been awarded DNV (Det Norske Veritas) certification for classification of ships, high speed & light craft and DNV's offshore standards. This classification certifies all materials, components and systems relevant to the safe operation and quality of ships. DNV Type...

Read More »
Differential Pressure Gauge provides 0.1% accuracy.
Test & Measurement

Differential Pressure Gauge provides 0.1% accuracy.

Intrinsically safe and ATEX certified, wet/wet Model XP2i-DP features burst disc that protects sensor from over-pressure on low side connection. Digital gauge provides datalogging capabilities and can be programmed for custom engineering units. Available in panel mounting and portable configurations, unit is tested and calibrated inside environmental test chambers using computer-controlled...

Read More »
Company News

Crystal Engineering Announces A2LA Accreditation to ISO 17025:2005 and ANSI/NCSL Z540

Crystal Engineering Announces A2LA Accreditation to ISO 17025:2005 and ANSI/NCSL Z540 Awarded by the American Association for Laboratory Accreditation (A2LA) San Luis Obispo, CA - Crystal Engineering Corporation, a leading pressure instrumentation company, announces that it has been awarded calibration accreditation to ISO 17025:2005 and ANSI/NCSL Z540-1-1994 by the American Association for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers