Metcase

METCASE 19
Architectural & Civil Engineering Products

METCASE 19

OKW's metal enclosures division METCASE has added extruded handles to its range of accessories for custom 19" front panels, rack cases and chassis. They make it easier to fit the front panels or chassis into cabinets or remove them during installation and maintenance – speeding up servicing. METCASE first showcased the handles on its COMBIMET rack mount enclosures range which was launched...

Read More »
Manufacturing Service produces custom metal enclosures.
Architectural & Civil Engineering Products

Manufacturing Service produces custom metal enclosures.

By using standard extrusion profiles and die castings and manufacturing special fabricated sheet metal parts, Custom Enclosures Service helps design engineers develop unique, requirement-matched housings. Available enclosures types include desktop, portable, wall mount, and 19 in. rack mount varieties. Additional options range from component mounting parameters and external dimensions...

Read More »
Aluminum 19 in. Instrument Enclosures accept 3U equipment.
Computer Hardware & Peripherals

Aluminum 19 in. Instrument Enclosures accept 3U equipment.

Available in 3U x 10.5 in. x 13.77 in., 3U x 19 in. x 13.77 in., and 3U x 19 in. x 17.71 in. sizes, INSTRUMET enclosures conform to DIN 41494 and IEC 297-1 standards for 19 in. equipment and accept standard 3U subracks and chassis. Two versions are available with ABS side handles for desktop use or tough diecast bail arm for portable applications. Base and rear panels have ventilation slots, and...

Read More »
Instrument Enclosures house desktop or portable electronics.
Architectural & Civil Engineering Products

Instrument Enclosures house desktop or portable electronics.

Offered in black or light gray, UNICASE Aluminum Enclosures come in 10 sizes with external dimensions from 5.11 x 7.08 x 1.96 in. to 18.66 x 11.81 x 5.29 in. Supplied flat packed, units consist of top and base covers, 2 internal assembly extrusions, anodized front and rear panels, and non-slip rubber feet. Internal assembly extrusions have guide rails for mounting slide-in PCBs and chassis...

Read More »
Custom Metal Enclosure Service exactly matches supplied specs.
Architectural & Civil Engineering Products

Custom Metal Enclosure Service exactly matches supplied specs.

Bespoke Enclosures Service helps develop unique housing that exactly matches provided requirements. Enclosures can be manufactured to order, including desktop, portable, wall mount, and 19 in. rack mount cases, utilizing standard extrusion profiles and diecastings as well as fabricated sheet metal parts. Design engineer can specify all mounting parameters for electronic components, assemblies,...

Read More »
Ventilated 19" Rack Cases promote airflow through enclosures.
Electronic Components & Devices

Ventilated 19" Rack Cases promote airflow through enclosures.

Featuring matrix of specifically designed slots in top and base panels, ventilated versions of COMBIMET 19 in. rack case series assist in-rack thermal management by allowing unrestricted airflow through enclosures. Products conform to DIN 41494 and IEC 297-1 standards for 19 in. equipment, are manufactured from aluminum, and have 2 ergonomic front panel handles. Range includes 1U, 2U, and 3U...

Read More »
Wall Mount Enclosures house indoor electronics.
Architectural & Civil Engineering Products

Wall Mount Enclosures house indoor electronics.

Comprising diecast front bezel, fabricated aluminum case body, and rear panel assembly, DATAMET Enclosures come in 3 sizes: 9.84 x 7.08 x 4.72 in., 13.77 x 9.84 x 4.72 in., and 15.75 x 11.81 x 4.72 in. Rear panel includes mounting points for fixing PCBs and fitting enclosure to wall or machine, while underside of body can be used for cable glands or connectors. Painted all black, enclosures are...

Read More »
Steel 19 in. Wall Racks assemble in minutes without any tools.
Architectural & Civil Engineering Products

Steel 19 in. Wall Racks assemble in minutes without any tools.

RETEX EASYRACK 19 in. wall-mount racks facilitate installation of network cabling and electronics equipment in data centers, offices, or home offices. Standard racks come in 6U, 9U, 12U, 15U, and 18U panel sizes in 3 depths and have glass front door and adjustable 19 in. panel mounts. At 15 in. wide, SOHO cabinet has 7U adjustable panel mounts and glass front door. Once mounted on wall, 6U open...

Read More »
Aluminum Enclosures feature ergonomic, sloping front design.
Architectural & Civil Engineering Products

Aluminum Enclosures feature ergonomic, sloping front design.

Designed for desktop and wall-mounted electronic systems, UNIDESK Enclosures are manufactured from 2 die cast aluminum end panels and extruded front and rear profiles. Base panel is removable and includes mounting points for fitting M3 PCB screw pillars. Available in 3 models measuring 7.87 x 7.87 x 4.01 in., 11.81 x 7.87 x 4.01 in., and 15.75 x 7.87 x 4.01 in., enclosures can be sealed against...

Read More »
Aluminum Instrument Enclosures come in 6 sizes.
Architectural & Civil Engineering Products

Aluminum Instrument Enclosures come in 6 sizes.

With external dimensions ranging from 9.055 x 7.480 x 1.968 in. to 13.779 x 10.236 x 5.905 in., UNIMET Enclosures consist of die cast front bezel which locates onto fabricated case body. Base panel can be removed separately, and includes mounting points for PCBs and assemblies, while removable rear panel is recessed and is suitable for mounting power inlets, connectors, and switches. Applications...

Read More »

All Topics