Metcase
Bridgeville, PA 15017
New Anodized-Look Custom Paint for Metcase Enclosures
METCASE aluminum electronic enclosures are now available with an elegant new anodized-style powder coating that provides a cost-effective alternative to the traditional electrochemical anodized finish. This smart new custom paint finish gives the enclosure front/rear panels an anodized look at a price that is viable for low-volume custom orders (where the panels are to be punched and printed to...
Read More »
New Cantilever Shelves Available in 2U and 3U Heights
Enables electronic equipment without built-in 19” fittings. Finished in tough powder polyester paint in either anthracite or light gray. Ideal for networking and communications equipment, industrial computers, sound and studio systems and industrial control.
Read More »
New Enclosures Available in Light Gray and Black Color
Provided with four non-slip rubber feet and stainless steel and MS Pozidriv fixings. Ideal for electronics and electro-technical terminals, office systems, point-of-sale and medical devices.
Read More »
METCASE 19 Enclosures Meet The Latest DIN 41494, IEC 60297-3 Standard
All METCASE 19” standard and customized enclosures now conform to the latest DIN 41494, IEC 60297-3 standard for the mechanical structure of electronics equipment. Level 1 of the standard covers the dimensions of Eurocard modules. Level 2 sets out the width in HP (1 HP = 5.08 mm) and height in U (1U = 44.45 mm, 1.75”) of 19” rack cases and subracks. These will be mounted in a Level 3 19”...
Read More »
Specify METCASE TECHNOMET Instrument Enclosures in Custom Colors
METCASE’s advanced TECHNOMET instrument enclosures can be specified in custom colors -- even in low volumes. Options range from trim and bezel highlights to bespoke colors for the whole enclosure. TECHNOMET desktop and portable instrument enclosures are ideal for medical and wellness devices, test and measurement equipment, industrial control, peripheral devices and interfaces, switchboxes,...
Read More »
New Instrument Enclosures Available in Light Gray and Window Gray Color Combination
Removable rear panel that is recessed to protect connectors and switches. Cast from zinc which allows finer tolerances, better fit and paint finish. Ideal for medical devices, test and measurement, industrial control, peripherals and interfaces, switchboxes, communications and laboratory equipment.
Read More »
New 10.5-Inch Enclosures with Diecast Aluminum Front and Rear Bezels
Available in standard heights of 3U or 4U and a depth of 12.99-inch. Inside are two subrack/chassis support rails, along with M4 earthing pillars. Applications include networking and communications, industrial computers, laboratory instrumentation and industrial control.
Read More »
New Aluminum Instrument Enclosures Offer Access to PCBs and Components
UNICASE is available in 10 standard sizes 5.11” x 7.08” x 1.97” to 18.66” x 11.81” x 5.29” and two standard colors including light gray and black. Supply includes the front and rear panels and four push-in non-slip rubber feet. Ideal for measuring and control, feedback control, peripheral devices and interfaces, switchboxes, modems, medical and laboratory technology.
Read More »
Latest TECHNOMET Rack Enclosures Comes with Steel Rack Mounting Brackets
Available in3U, 4U, 5U and 6U standard sizes and are designed for mounting standard 19 in. subracks, chassis and front panels. Consists of two diecast aluminum front and rear bezels, case body with internal chassis and a removable rear panel. Applications include test and measurement, networking, communications, sound and studio systems, laboratory instruments, industrial computers and control...
Read More »
New 28 Deep Custom COMBIMET Includes Removable Top, Base and Rear Panels
Features ergonomic front panel handles and mounting holes for PCBs and chassis. Available in all heights from 1U to 6U and in any color. Ideal for networking and communications, sound and studio electronics, laboratory instruments and control systems.
Read More »
New Anodized-Look Custom Paint for Metcase Enclosures
METCASE aluminum electronic enclosures are now available with an elegant new anodized-style powder coating that provides a cost-effective alternative to the traditional electrochemical anodized finish. This smart new custom paint finish gives the enclosure front/rear panels an anodized look at a price that is viable for low-volume custom orders (where the panels are to be punched and printed to...
Read More »
New Cantilever Shelves Available in 2U and 3U Heights
Enables electronic equipment without built-in 19” fittings. Finished in tough powder polyester paint in either anthracite or light gray. Ideal for networking and communications equipment, industrial computers, sound and studio systems and industrial control.
Read More »
New Enclosures Available in Light Gray and Black Color
Provided with four non-slip rubber feet and stainless steel and MS Pozidriv fixings. Ideal for electronics and electro-technical terminals, office systems, point-of-sale and medical devices.
Read More »METCASE's New Production Technology Creates Superior Metal Electronic Enclosures
Metal electronic enclosures specialist METCASE has invested a six-figure sum in new hi-tech equipment to further enhance quality, accelerate production and drive innovation. Three new state-of-the-art CNC punching, forming and milling machines are helping METCASE to create the next generation of standard and customized 19” rack cases, 19” mini-racks, desktop and portable instrument...
Read More »
METCASE 19 Enclosures Meet The Latest DIN 41494, IEC 60297-3 Standard
All METCASE 19” standard and customized enclosures now conform to the latest DIN 41494, IEC 60297-3 standard for the mechanical structure of electronics equipment. Level 1 of the standard covers the dimensions of Eurocard modules. Level 2 sets out the width in HP (1 HP = 5.08 mm) and height in U (1U = 44.45 mm, 1.75”) of 19” rack cases and subracks. These will be mounted in a Level 3 19”...
Read More »
Specify METCASE TECHNOMET Instrument Enclosures in Custom Colors
METCASE’s advanced TECHNOMET instrument enclosures can be specified in custom colors -- even in low volumes. Options range from trim and bezel highlights to bespoke colors for the whole enclosure. TECHNOMET desktop and portable instrument enclosures are ideal for medical and wellness devices, test and measurement equipment, industrial control, peripheral devices and interfaces, switchboxes,...
Read More »
New Instrument Enclosures Available in Light Gray and Window Gray Color Combination
Removable rear panel that is recessed to protect connectors and switches. Cast from zinc which allows finer tolerances, better fit and paint finish. Ideal for medical devices, test and measurement, industrial control, peripherals and interfaces, switchboxes, communications and laboratory equipment.
Read More »
New 10.5-Inch Enclosures with Diecast Aluminum Front and Rear Bezels
Available in standard heights of 3U or 4U and a depth of 12.99-inch. Inside are two subrack/chassis support rails, along with M4 earthing pillars. Applications include networking and communications, industrial computers, laboratory instrumentation and industrial control.
Read More »METCASE Enclosures Doubles its Digital Printing Capacity
METCASE’s new digital printing facility is 40% faster – and the new inks are more scratch resistant Metal enclosures manufacturer METCASE has further invested in new technology to meet growing demand for cases and front panels printed with photo-quality legends, logos and graphics. METCASE first introduced digital printing five years ago. Now increased demand has prompted the company to...
Read More »
New Aluminum Instrument Enclosures Offer Access to PCBs and Components
UNICASE is available in 10 standard sizes 5.11” x 7.08” x 1.97” to 18.66” x 11.81” x 5.29” and two standard colors including light gray and black. Supply includes the front and rear panels and four push-in non-slip rubber feet. Ideal for measuring and control, feedback control, peripheral devices and interfaces, switchboxes, modems, medical and laboratory technology.
Read More »