Aleddra LED Lighting
Renton, WA 98057
Safe Dual-Mode LED Tube meets UL OOLV and IFAR standards.
In addition to meeting UL IFAR safety standards for troffer retrofit applications (UL E325073) fifth generation G5 SureFit DBA LED tube meets UL OOLV (Type A/Type B) safety standards (UL 479597) for direct-fit operation with ballast and direct-wire operation on line voltage. Product consumes 15 W and operates on most Instant Start and Rapid Start ballasts. Along with 180° beam angle, features...
Read More »
Dual-Mode Type D LED Tubes are fail safe and shock free.
With plug-and-play design thatÂ- works in linear fixtures, dual-mode SureFit DBA+ tube can operate with Instant Start electronic ballasts and on direct AC line voltage. Removing ballast once it fails reduces energy usage and maintenance while also eliminating arc flash and burn hazards. UL-certified for Type A and B operations, tubes have safety switch on both endcaps for anti-shock...
Read More »
Outdoor LED Luminaire features vapor tight design.
Equipped with field-replaceable plug-and-play driver, Alegant Vapor Tight Luminaire gives end users flexibility to choose different driver configurations for variety of applications, and allows for future upgrades without replacing fixture. Product features 180° beam angle and IP65 rating making it suited for wet locations or low temperature storage rooms. For additional protection,...
Read More »
Burn Hazard with Ballast-Compatible LED Tube
A major US lighting manufacture recently announced a recall of 700,000 ballast-compatible LED tube due to potential burn hazard by arcing. (Search LED T8 recall" on Internet for more information.) The recall was for "arching" that was occurring inside the ballast-compatible tube, that is, an internal arcing. This issue can be resolved by modifying the tube design. However, this falls short to...
Read More »
LED Tube Retrofit for T8/T12 Lamps works with or without ballast.
Available in 4 and 2 ft models with respective outputs of 2,000 and 1,600 lm, SureFit® DBA+ tube works with Instant Start ballast and 110–277 Vac, 50–60 Hz line voltage (without ballast) and features double-end safety switches. UL- and DLC-certified tubes, which come standard with field-replaceable driver, come in 2,700K, 3,000K, 3,500K, 4,000K, 4,500K, and 5,000K CCTs, have CRI of >80,...
Read More »
LED Tube Lamp extends maintenance via field-replaceable driver.
Meeting needs of facility managers and lighting contractors, EasiRetrofit® G3 (third generation) LED tube lamp features double-ended safety switch and is designed to protect installers and maintenance crews from electric shock hazards. Driver has life expectancy of 5 years and can be replaced, in field, by end-user in
Read More »LED Highbay Luminaire combines rich feature set, aesthetics.
DeliveringÂ- 100 lm/W efficacy with Nichia LED chip, HaloMax has reflector design that maximizes light distribution with minimal reflective loss. Thermal management with air ventilation enables -40 to +140°F operation, and aeronautical-grade aluminum alloy with anodized coating protects against rust, corrosion, and saltwater. IP68-rated product, suited for wet...
Read More »
Aleddra Lighting Offers Clients Customizable LED Product Solutions
Aleddra's superior customer service extends beyond having a great product as they confront unique installation challenges RENTON, Wash. - Life is full of variables, and there is no difference when it comes to energy efficient lighting. Take the linear fixture retrofit as an example. One would assume that all linear fixtures should be made according to the same dimension and within the standard...
Read More »
Engineering Products Co. and Aleddra Partner to Offer Cost-Effective Retrofit Solution for Converting T12 Strip Light Fixtures to Energy-Efficient Linear LED Fixtures
RENTON, Wash. - Engineering Products Co. (EPCO, www.engproducts.com), a supplier of specialty lighting and wiring consumable products for electrical contractors, and Aleddra LED Lighting (www.aleddra.com), a leading LED tube manufacturer, announced that the two companies will jointly offer a complete retrofit lighting solution that converts older, four- or eight-foot T12 strip light fixtures into...
Read More »Aleddra LED Tube Receives Outstanding Rating Among Facility Managers
After 50% growth in 2013, company expands national sales team to service educational, commercial, and industrial customers RENTON, Wash. - Aleddra LED Lighting, a business unit of Lightel Technologies, Inc., reports outstanding customer satisfaction among facility managers and expands its national sales team to better service the rapid growth in the educational, commercial, and industrial...
Read More »
Safe Dual-Mode LED Tube meets UL OOLV and IFAR standards.
In addition to meeting UL IFAR safety standards for troffer retrofit applications (UL E325073) fifth generation G5 SureFit DBA LED tube meets UL OOLV (Type A/Type B) safety standards (UL 479597) for direct-fit operation with ballast and direct-wire operation on line voltage. Product consumes 15 W and operates on most Instant Start and Rapid Start ballasts. Along with 180° beam angle, features...
Read More »
Dual-Mode Type D LED Tubes are fail safe and shock free.
With plug-and-play design thatÂ- works in linear fixtures, dual-mode SureFit DBA+ tube can operate with Instant Start electronic ballasts and on direct AC line voltage. Removing ballast once it fails reduces energy usage and maintenance while also eliminating arc flash and burn hazards. UL-certified for Type A and B operations, tubes have safety switch on both endcaps for anti-shock...
Read More »
Outdoor LED Luminaire features vapor tight design.
Equipped with field-replaceable plug-and-play driver, Alegant Vapor Tight Luminaire gives end users flexibility to choose different driver configurations for variety of applications, and allows for future upgrades without replacing fixture. Product features 180° beam angle and IP65 rating making it suited for wet locations or low temperature storage rooms. For additional protection,...
Read More »
Burn Hazard with Ballast-Compatible LED Tube
A major US lighting manufacture recently announced a recall of 700,000 ballast-compatible LED tube due to potential burn hazard by arcing. (Search LED T8 recall" on Internet for more information.) The recall was for "arching" that was occurring inside the ballast-compatible tube, that is, an internal arcing. This issue can be resolved by modifying the tube design. However, this falls short to...
Read More »
LED Tube Retrofit for T8/T12 Lamps works with or without ballast.
Available in 4 and 2 ft models with respective outputs of 2,000 and 1,600 lm, SureFit® DBA+ tube works with Instant Start ballast and 110–277 Vac, 50–60 Hz line voltage (without ballast) and features double-end safety switches. UL- and DLC-certified tubes, which come standard with field-replaceable driver, come in 2,700K, 3,000K, 3,500K, 4,000K, 4,500K, and 5,000K CCTs, have CRI of >80,...
Read More »
LED Tube Lamp extends maintenance via field-replaceable driver.
Meeting needs of facility managers and lighting contractors, EasiRetrofit® G3 (third generation) LED tube lamp features double-ended safety switch and is designed to protect installers and maintenance crews from electric shock hazards. Driver has life expectancy of 5 years and can be replaced, in field, by end-user in
Read More »LED Highbay Luminaire combines rich feature set, aesthetics.
DeliveringÂ- 100 lm/W efficacy with Nichia LED chip, HaloMax has reflector design that maximizes light distribution with minimal reflective loss. Thermal management with air ventilation enables -40 to +140°F operation, and aeronautical-grade aluminum alloy with anodized coating protects against rust, corrosion, and saltwater. IP68-rated product, suited for wet...
Read More »
Aleddra Lighting Offers Clients Customizable LED Product Solutions
Aleddra's superior customer service extends beyond having a great product as they confront unique installation challenges RENTON, Wash. - Life is full of variables, and there is no difference when it comes to energy efficient lighting. Take the linear fixture retrofit as an example. One would assume that all linear fixtures should be made according to the same dimension and within the standard...
Read More »
Engineering Products Co. and Aleddra Partner to Offer Cost-Effective Retrofit Solution for Converting T12 Strip Light Fixtures to Energy-Efficient Linear LED Fixtures
RENTON, Wash. - Engineering Products Co. (EPCO, www.engproducts.com), a supplier of specialty lighting and wiring consumable products for electrical contractors, and Aleddra LED Lighting (www.aleddra.com), a leading LED tube manufacturer, announced that the two companies will jointly offer a complete retrofit lighting solution that converts older, four- or eight-foot T12 strip light fixtures into...
Read More »Aleddra LED Tube Receives Outstanding Rating Among Facility Managers
After 50% growth in 2013, company expands national sales team to service educational, commercial, and industrial customers RENTON, Wash. - Aleddra LED Lighting, a business unit of Lightel Technologies, Inc., reports outstanding customer satisfaction among facility managers and expands its national sales team to better service the rapid growth in the educational, commercial, and industrial...
Read More »
