Kennametal Inc.

Kennametal Announced New Boring System with an Array of Interchangeable Heads
Machinery & Machining Tools

Kennametal Announced New Boring System with an Array of Interchangeable Heads

The New Boring System includes a serrated, bolt-on connection at the bar’s business end for securely clamping various styles and sizes of indexable heads. The system is coolant-fed that directs steam of high-pressure coolant. The bar consists of a mass inside it that vibrates at a predetermined frequency during machining and attenuates natural frequency of the bar around it for suppressing...

Read More »
Kennametal Launches APX Series of ROCTEC Nozzles with Twenty Percent Greater Life
Fluid & Gas Flow Equipment

Kennametal Launches APX Series of ROCTEC Nozzles with Twenty Percent Greater Life

Kennametal is introducing their ROCTEC APX waterjet nizzles and the FABTECH Expo trade show in Atlanta, GA from November 6 to 8. The APX series provides a 20 percent greater life than the ROCTEC 500 series and significantly outperforms conventional tungsten carbide nozzles. The nozzles are ideal for use in precision cutting applications and allow waterjet shops to perform more complex jobs with...

Read More »
Kennametal Announces Release of New Milling Cutter to Help Lower Machining Forces and Improve Cutting Time
Laboratory and Research Supplies and Equipment

Kennametal Announces Release of New Milling Cutter to Help Lower Machining Forces and Improve Cutting Time

Kennametal’s HARVI Ultra 8X features a double-sided rake insert, a BTF46 connection, a AlTiN + TiN PVD coating, and a helix design. The milling cutter is designed to reduce power consumption by 50 percent, lower cost per edge, reduce carbide-killing vibration and adapt to any machine tool spindle without losing rigidity. The HARVI Ultra 8X has applications for aerospace and machine tool...

Read More »
HARVI Ultra 8X Milling Cutter from Kennametal Features a Unique BTF46 Connection
Laboratory and Research Supplies and Equipment

HARVI Ultra 8X Milling Cutter from Kennametal Features a Unique BTF46 Connection

The HARVI™ Ultra 8X Milling Cutter is used for removing 20 cubic in. of Ti-6Al-4V per minute with 60 minutes of tool life for each cutting edge. The unit comes with double-sided positive rake insert that reduces the power consumption by 50 percent and lowers the cost per edge. It is constructed of high quality steel with BTF46 connection that provides maximum resistance to deflection.

Read More »
Kennametal's New KBH10 Turning Inserts Offer Low Cutting Forces
Construction Equipment and Supplies

Kennametal's New KBH10 Turning Inserts Offer Low Cutting Forces

KBH10 Polycrystalline Cubic Boron Nitride Turning Inserts are available in various geometries and edge preparations. Units are designed to deliver cutting speeds of 20% higher and provide surface roughness of Ra 0.2 and Rz 1. The Inserts are suitable for aerospace, automotive and power generation applications. KBH10 deliver a cutting speed of 180 m/min with average depth cut of 0.15 mm and...

Read More »
Laboratory and Research Supplies and Equipment

The Ironmaster

Kennametal´s next generation face mill tackles the toughest cast iron applications with easeKennametal´s Mill 16 has a wedge-style clamping system, numbered pockets and inserts, and an open pocket design to increase chip flow in heavy roughing Iron is the most abundant element on earth by mass. For over twenty-five centuries it´s been used to plow fields, build bridges, cook food, and wage...

Read More »
KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.
Laboratory and Research Supplies and Equipment

KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.

Using fine-pitch aluminum body with wedge-style clamps and adjustable pockets, KBDM PCD face milling system is stocked in standard sizes of 2.5 - 8.0 in. (63 - 200 mm). Designed for high-volume machining, unit enables initial cutting speed of 3280 ft/min (1000 m/min) and feedrates of .004 in. per tooth (0.01 mm). With small diamond grains, KD1400 offers excellent chipping resistance. Using large...

Read More »
Machinery & Machining Tools

Driven to Succeed

Kennametal partners with EWS Tool Technologies, a global provider of precision lathe toolingA wide variety of KM tooling for multitasking machines, machining centers, and mill-turn lathes is readily available, improving productivity in any machining application Multitasking and mill-turn centers were once considered high-end specialty machines, found only in shops with the financial resources and...

Read More »
Indexable Milling Cutter offers free cutting action.
Laboratory and Research Supplies and Equipment

Indexable Milling Cutter offers free cutting action.

Designed for smaller machining centers, Mill 4-11 accommodates 40-taper CAT and BT, HSK50, and similarly sized spindles. Tool comes in variety of mounting options, with cutter diameters from 0.625–3.000 in. and max cut length of 0.433 in. Featuring complex, double-sided geometry and accurate pocket positioning, cutter has effective radial rake angle from 1–11°, depending on cutter...

Read More »
Dual-Sided Indexable Milling Cutter offers free cutting action.
Laboratory and Research Supplies and Equipment

Dual-Sided Indexable Milling Cutter offers free cutting action.

Accommodating 40-taper CAT and BT, HSK50, and similarly sized spindles, Mill 4-11 is suited for metal removal in less-than-rigid setups and on light-duty machine tools, multitaskers, and live-tool lathes. Insert design and precision minimize mismatch between passes. Using 2.48 in. dia tool and SGE geometry, product can achieve < 0 .00003 in. deviation between successive 0.236 in. deep...

Read More »
Kennametal Announced New Boring System with an Array of Interchangeable Heads
Machinery & Machining Tools

Kennametal Announced New Boring System with an Array of Interchangeable Heads

The New Boring System includes a serrated, bolt-on connection at the bar’s business end for securely clamping various styles and sizes of indexable heads. The system is coolant-fed that directs steam of high-pressure coolant. The bar consists of a mass inside it that vibrates at a predetermined frequency during machining and attenuates natural frequency of the bar around it for suppressing...

Read More »
Kennametal Launches APX Series of ROCTEC Nozzles with Twenty Percent Greater Life
Fluid & Gas Flow Equipment

Kennametal Launches APX Series of ROCTEC Nozzles with Twenty Percent Greater Life

Kennametal is introducing their ROCTEC APX waterjet nizzles and the FABTECH Expo trade show in Atlanta, GA from November 6 to 8. The APX series provides a 20 percent greater life than the ROCTEC 500 series and significantly outperforms conventional tungsten carbide nozzles. The nozzles are ideal for use in precision cutting applications and allow waterjet shops to perform more complex jobs with...

Read More »
Kennametal Announces Release of New Milling Cutter to Help Lower Machining Forces and Improve Cutting Time
Laboratory and Research Supplies and Equipment

Kennametal Announces Release of New Milling Cutter to Help Lower Machining Forces and Improve Cutting Time

Kennametal’s HARVI Ultra 8X features a double-sided rake insert, a BTF46 connection, a AlTiN + TiN PVD coating, and a helix design. The milling cutter is designed to reduce power consumption by 50 percent, lower cost per edge, reduce carbide-killing vibration and adapt to any machine tool spindle without losing rigidity. The HARVI Ultra 8X has applications for aerospace and machine tool...

Read More »
HARVI Ultra 8X Milling Cutter from Kennametal Features a Unique BTF46 Connection
Laboratory and Research Supplies and Equipment

HARVI Ultra 8X Milling Cutter from Kennametal Features a Unique BTF46 Connection

The HARVI™ Ultra 8X Milling Cutter is used for removing 20 cubic in. of Ti-6Al-4V per minute with 60 minutes of tool life for each cutting edge. The unit comes with double-sided positive rake insert that reduces the power consumption by 50 percent and lowers the cost per edge. It is constructed of high quality steel with BTF46 connection that provides maximum resistance to deflection.

Read More »
Kennametal's New KBH10 Turning Inserts Offer Low Cutting Forces
Construction Equipment and Supplies

Kennametal's New KBH10 Turning Inserts Offer Low Cutting Forces

KBH10 Polycrystalline Cubic Boron Nitride Turning Inserts are available in various geometries and edge preparations. Units are designed to deliver cutting speeds of 20% higher and provide surface roughness of Ra 0.2 and Rz 1. The Inserts are suitable for aerospace, automotive and power generation applications. KBH10 deliver a cutting speed of 180 m/min with average depth cut of 0.15 mm and...

Read More »
People in the News

Driven to Succeed

Kennametal partners with EWS Tool Technologies, a global provider of precision lathe tooling. A wide variety of KM tooling for multitasking machines, machining centers, and mill-turn lathes is readily available, improving productivity in any machining application. Multitasking and mill-turn centers were once considered high-end specialty machines, found only in shops with the financial resources...

Read More »
Laboratory and Research Supplies and Equipment

The Ironmaster

Kennametal´s next generation face mill tackles the toughest cast iron applications with easeKennametal´s Mill 16 has a wedge-style clamping system, numbered pockets and inserts, and an open pocket design to increase chip flow in heavy roughing Iron is the most abundant element on earth by mass. For over twenty-five centuries it´s been used to plow fields, build bridges, cook food, and wage...

Read More »
KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.
Laboratory and Research Supplies and Equipment

KBDM PCD face milling system offers finishes of 2 to 3 ìm Ra.

Using fine-pitch aluminum body with wedge-style clamps and adjustable pockets, KBDM PCD face milling system is stocked in standard sizes of 2.5 - 8.0 in. (63 - 200 mm). Designed for high-volume machining, unit enables initial cutting speed of 3280 ft/min (1000 m/min) and feedrates of .004 in. per tooth (0.01 mm). With small diamond grains, KD1400 offers excellent chipping resistance. Using large...

Read More »
Machinery & Machining Tools

Driven to Succeed

Kennametal partners with EWS Tool Technologies, a global provider of precision lathe toolingA wide variety of KM tooling for multitasking machines, machining centers, and mill-turn lathes is readily available, improving productivity in any machining application Multitasking and mill-turn centers were once considered high-end specialty machines, found only in shops with the financial resources and...

Read More »
Indexable Milling Cutter offers free cutting action.
Laboratory and Research Supplies and Equipment

Indexable Milling Cutter offers free cutting action.

Designed for smaller machining centers, Mill 4-11 accommodates 40-taper CAT and BT, HSK50, and similarly sized spindles. Tool comes in variety of mounting options, with cutter diameters from 0.625–3.000 in. and max cut length of 0.433 in. Featuring complex, double-sided geometry and accurate pocket positioning, cutter has effective radial rake angle from 1–11°, depending on cutter...

Read More »

All Topics