ITT Defense Electronics & Services

Construction Equipment and Supplies

ITT Develops Custom ARINC 600 Connector for In-Flight Entertainment Systems

ARINC 600 connector meets stringent specifications in cost-efficient design... SANTA ANA, Calif. - September 17, 2008 - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has developed a custom ARINC 600 connector designed specifically for in-flight entertainment (IFE) systems used in commercial aircraft. The ARINC 600...

Read More »
Junction Box Assembly suits mass transit applications.
Electrical Equipment & Systems

Junction Box Assembly suits mass transit applications.

Approved to IP66 standards, VEAM junction box assembly contains complete harnessing system, including terminal blocks, cables, and electrical components. It is designed for control switchboard connections between vehicles, tilting systems, CCTV equipment, inter-vehicle connections, power and signal connections, and motor supplies up to 660 A. Power and signal contacts on components are rated to...

Read More »
Construction Equipment and Supplies

Nano-Miniature Connectors feature 0.635 mm contact pitch.

Engineered for space and weight conservation, circular connectors utilize twist pin micro-miniature contact technology. High-reliability electrical contact terminations with insulated wire/pigtails provide secure connections in severe shock and vibration environments. Available with up to 266 contacts, products are available with various layout configuration and termination options to meet...

Read More »
Servomotor Connector handles power current to 40 A.
Construction Equipment and Supplies

Servomotor Connector handles power current to 40 A.

Suitable for motor flanges of up to 150 x 150 mm, Series Cm5 features crimp contacts and includes 2 sealed entries for power and signal cables. Power connectors feature cable diameter of 19 mm, max current of 40 A at 80°C, contact resistance of less than 5 mW, and max voltage of 630 Vac. Signal connectors feature cable diameter of 11 mm, max current of 3 A at 80°C, contact resistance...

Read More »
ITT's Chip on Flex Filter Technology Withstands 1,000 Cycles of Thermal Shock and Vibration Testing
Construction Equipment and Supplies

ITT's Chip on Flex Filter Technology Withstands 1,000 Cycles of Thermal Shock and Vibration Testing

October 22, 2007 SANTA ANA, Calif. - October 22, 2007 - ITT Electronic Components, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has tested their Chip on Flex (CoF) filter connector technology to 1,000 cycles of thermal shock from -55°C to +125°C per MIL-STD-1344. Compared to the ceramic planar array block capacitor used in conventional...

Read More »
Micro-D Pi Filter Connector suits military applications.
Construction Equipment and Supplies

Micro-D Pi Filter Connector suits military applications.

Built with aluminum shells able to withstand harsh environment applications, TMDMP filter is available in 5 sizes with contacts for both sockets (receptacle) and pins (plugs). Internal filter design provides density needed to accommodate ferrite tubes necessary for Pi filtering in military and aerospace applications. It utilizes 2 capacitors around ferrite inductor to provide optimal attenuation....

Read More »
Electronic Components & Devices

Universal Contacts provide SMT solution.

Universal Contacts provide electrical connection between devices and PCBs. Single piece stamped units incorporate pre-load and anti-load features and can be used to connect device components in any direction or configuration. Contacts have 1.3 mm profile and are available in heights of 1.3, 1.8, 2.5, 3.5 and 4 mm at minimum pitches of 1.35, 1.25, 1.35, 1.45, and 1.45 mm, respectively. Side wings...

Read More »
PC Card Connectors feature universal slot design.
Construction Equipment and Supplies

PC Card Connectors feature universal slot design.

Measuring 5 x 75 mm, Cannon Express Card 26-pin Connectors and Cover Sets meet PCMCIA demands for 34 and 54 mm wide modules and enable both ExpressCard 34 and 54 cards to fit in same aperture. Stainless steel cover sets can be snapped together or ultrasonically welded. Design is RoHS-compliant and allows up to 10,000 cover set mating cycles. Applications include notebook computers, smart card...

Read More »
Construction Equipment and Supplies

ITT Develops Custom ARINC 600 Connector for In-Flight Entertainment Systems

ARINC 600 connector meets stringent specifications in cost-efficient design... SANTA ANA, Calif. - September 17, 2008 - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has developed a custom ARINC 600 connector designed specifically for in-flight entertainment (IFE) systems used in commercial aircraft. The ARINC 600...

Read More »
Junction Box Assembly suits mass transit applications.
Electrical Equipment & Systems

Junction Box Assembly suits mass transit applications.

Approved to IP66 standards, VEAM junction box assembly contains complete harnessing system, including terminal blocks, cables, and electrical components. It is designed for control switchboard connections between vehicles, tilting systems, CCTV equipment, inter-vehicle connections, power and signal connections, and motor supplies up to 660 A. Power and signal contacts on components are rated to...

Read More »
Construction Equipment and Supplies

Nano-Miniature Connectors feature 0.635 mm contact pitch.

Engineered for space and weight conservation, circular connectors utilize twist pin micro-miniature contact technology. High-reliability electrical contact terminations with insulated wire/pigtails provide secure connections in severe shock and vibration environments. Available with up to 266 contacts, products are available with various layout configuration and termination options to meet...

Read More »
Servomotor Connector handles power current to 40 A.
Construction Equipment and Supplies

Servomotor Connector handles power current to 40 A.

Suitable for motor flanges of up to 150 x 150 mm, Series Cm5 features crimp contacts and includes 2 sealed entries for power and signal cables. Power connectors feature cable diameter of 19 mm, max current of 40 A at 80°C, contact resistance of less than 5 mW, and max voltage of 630 Vac. Signal connectors feature cable diameter of 11 mm, max current of 3 A at 80°C, contact resistance...

Read More »
ITT's Chip on Flex Filter Technology Withstands 1,000 Cycles of Thermal Shock and Vibration Testing
Construction Equipment and Supplies

ITT's Chip on Flex Filter Technology Withstands 1,000 Cycles of Thermal Shock and Vibration Testing

October 22, 2007 SANTA ANA, Calif. - October 22, 2007 - ITT Electronic Components, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has tested their Chip on Flex (CoF) filter connector technology to 1,000 cycles of thermal shock from -55°C to +125°C per MIL-STD-1344. Compared to the ceramic planar array block capacitor used in conventional...

Read More »
Micro-D Pi Filter Connector suits military applications.
Construction Equipment and Supplies

Micro-D Pi Filter Connector suits military applications.

Built with aluminum shells able to withstand harsh environment applications, TMDMP filter is available in 5 sizes with contacts for both sockets (receptacle) and pins (plugs). Internal filter design provides density needed to accommodate ferrite tubes necessary for Pi filtering in military and aerospace applications. It utilizes 2 capacitors around ferrite inductor to provide optimal attenuation....

Read More »
Electronic Components & Devices

Universal Contacts provide SMT solution.

Universal Contacts provide electrical connection between devices and PCBs. Single piece stamped units incorporate pre-load and anti-load features and can be used to connect device components in any direction or configuration. Contacts have 1.3 mm profile and are available in heights of 1.3, 1.8, 2.5, 3.5 and 4 mm at minimum pitches of 1.35, 1.25, 1.35, 1.45, and 1.45 mm, respectively. Side wings...

Read More »
PC Card Connectors feature universal slot design.
Construction Equipment and Supplies

PC Card Connectors feature universal slot design.

Measuring 5 x 75 mm, Cannon Express Card 26-pin Connectors and Cover Sets meet PCMCIA demands for 34 and 54 mm wide modules and enable both ExpressCard 34 and 54 cards to fit in same aperture. Stainless steel cover sets can be snapped together or ultrasonically welded. Design is RoHS-compliant and allows up to 10,000 cover set mating cycles. Applications include notebook computers, smart card...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers