VTI Instruments Corp.

EX1401 Measuring Instrument is embedded with EXLab Express software.
Sensors, Monitors & Transducers

EX1401 Measuring Instrument is embedded with EXLab Express software.

Offering ±0.20°C accuracy, EX1401 Thermocouple and Voltage Measurement Instrument is designed with 1000 V channel-channel isolation and 500V channel-ground isolation. Suitable for automotive, battery testing, HALT/HASS and health monitoring applications, unit delivers a sampling rate of 20K samples/second/channel. Featuring PoE+ and LXI Ethernet interfaces, product comes with built-in parallel...

Read More »
EMX-75XX Series Digital Input/Output Modules use clamping diodes.
Controls & Controllers

EMX-75XX Series Digital Input/Output Modules use clamping diodes.

Available in EMX-7510, EMX-7511, EMX-7512, EMX-7513, EMX-7514 and EMX-7515 series, EMX-75XX Series of PXI Express Digital Input/Output Modules come with soft front panel interface, IVI software drivers and eight ports of 8 bits each. Suitable for driving and sensing device such as relays, unit provides 1000 V signal isolation. Product offers voltage inputs and outputs from 2 V to 60 V on each...

Read More »
Programmable Resistor Ladder Modules feature sense lead equipped channels.
Controls & Controllers

Programmable Resistor Ladder Modules feature sense lead equipped channels.

Suitable for simulation of resistance-based sensors, process control and ATE calibration devices, EMX-70XX Programmable Resistor Ladder Modules are available in EMX-7004, EMX-7005, EMX-7006, and EMX-7007 models. Featuring programmable setting range from 163 kΩ to 16,383 MΩ, units offer ≤ ±25 μV thermal offset and 0.5 W power rating for each channel. EMX-7004 module provides ±0.02% accuracy...

Read More »
PXIe Switching Modules provide signal isolation.
Agricultural & Farming Products

PXIe Switching Modules provide signal isolation.

Compatible with 18- and 9-slot 3U PXI Express mainframes and 4-slot portable PXI-hybrid mainframe, SentinelEX PXI Express Switching Modules help maximize performance of measurement instrumentation by reducing false pass/fail errors and intermittent faults associated with marginal signal levels. Products maximize test signal integrity through use of advanced circuit board layout techniques that...

Read More »
High-Density Switch Matrix reduces signal integrity degradation.
Electrical Equipment & Systems

High-Density Switch Matrix reduces signal integrity degradation.

Available for EX1200 Series multifunction switch/measure units, EX1200-SMP offers 16 integrated analog backplane lines. This lets designers create 16xN matricesÂ- as well asÂ- bridge together multiple carriers to create larger matrices with up to 704x8 two-wire inputs in one chassis. Supporting system configurations for switching applications that require flexibility of crosspoint matrix...

Read More »
RF/Microwave Switches have modular design.
Electrical Equipment & Systems

RF/Microwave Switches have modular design.

Enabling high integrity signal switching between sources and measurement instruments, EX7105A and EX7204A have open-platform COTS core that can be configured for custom applications. Both RF/microwave switching solutions employ common hardware platform and software-based communications interface. Supplied in 1 U rack, half-width enclosure, EX7105A suits size-constrained RF switching applications,...

Read More »
Transient Capture Module provides time stamping.
Controls & Controllers

Transient Capture Module provides time stamping.

Equipped with 16 input channels, Model EX1200-7416 can continuously monitor variety of analog and discrete signals up to 100 V. Each channel has 8-bit DAC that can be independently programmed to set trip level. Model EX1200-7416 also detects transients that cannot normally be captured by typical DMM or scanning measurement system. As part of EX1200 LXI Class A instrument series, module records...

Read More »
Signal Conditioner offers LAN-based LXI Class A connectivity.
Computer Hardware & Peripherals

Signal Conditioner offers LAN-based LXI Class A connectivity.

Complementing EX1000 data acquisition instruments, EX10SC Modular Signal Conditioning platform provides industrial-grade 1,500 Vrms isolation and 240 Vac input protection across broad range of transducers and input types. System enables integration of thermocouple, RTD, thermistor, strain gauge, pressure, voltage, and frequency inputs into EX1000A, EX1016A, and EX1032A data stream. Input channels...

Read More »
Signal Multiplexer switches up to 576 channels.
Communication Systems & Equipment

Signal Multiplexer switches up to 576 channels.

Designed for scanning multiple points to common bus in either 2- or 4-wire configurations, Model EX1200-3096 supports thermocouple, RTD, and thermistor measurements, and is suited for testing cable harnesses, semiconductors, and PCBs. Switch and measurement operations can be tightly synchronized as part of module's embedded scan list to minimize processor overhead and optimize test throughput....

Read More »
Software

New Software Release Lowers the Cost of Modal Testing Using VTI's DSA Hardware

Irvine, CA April 8, 2009 VTI Instruments Corporation is pleased to announce a new software solution designed to enhance the modal testing capabilities of its dynamic signal analysis (DSA) product family. Dynamic Measurements, Inc. has released its new Multiple-Input-Multiple-Output (MIMO) Frequency Response Measurements component, an addition to its Acq_Mat turnkey software. Acq_Mat enables users...

Read More »
EX1401 Measuring Instrument is embedded with EXLab Express software.
Sensors, Monitors & Transducers

EX1401 Measuring Instrument is embedded with EXLab Express software.

Offering ±0.20°C accuracy, EX1401 Thermocouple and Voltage Measurement Instrument is designed with 1000 V channel-channel isolation and 500V channel-ground isolation. Suitable for automotive, battery testing, HALT/HASS and health monitoring applications, unit delivers a sampling rate of 20K samples/second/channel. Featuring PoE+ and LXI Ethernet interfaces, product comes with built-in parallel...

Read More »
EMX-75XX Series Digital Input/Output Modules use clamping diodes.
Controls & Controllers

EMX-75XX Series Digital Input/Output Modules use clamping diodes.

Available in EMX-7510, EMX-7511, EMX-7512, EMX-7513, EMX-7514 and EMX-7515 series, EMX-75XX Series of PXI Express Digital Input/Output Modules come with soft front panel interface, IVI software drivers and eight ports of 8 bits each. Suitable for driving and sensing device such as relays, unit provides 1000 V signal isolation. Product offers voltage inputs and outputs from 2 V to 60 V on each...

Read More »
Programmable Resistor Ladder Modules feature sense lead equipped channels.
Controls & Controllers

Programmable Resistor Ladder Modules feature sense lead equipped channels.

Suitable for simulation of resistance-based sensors, process control and ATE calibration devices, EMX-70XX Programmable Resistor Ladder Modules are available in EMX-7004, EMX-7005, EMX-7006, and EMX-7007 models. Featuring programmable setting range from 163 kΩ to 16,383 MΩ, units offer ≤ ±25 μV thermal offset and 0.5 W power rating for each channel. EMX-7004 module provides ±0.02% accuracy...

Read More »
PXIe Switching Modules provide signal isolation.
Agricultural & Farming Products

PXIe Switching Modules provide signal isolation.

Compatible with 18- and 9-slot 3U PXI Express mainframes and 4-slot portable PXI-hybrid mainframe, SentinelEX PXI Express Switching Modules help maximize performance of measurement instrumentation by reducing false pass/fail errors and intermittent faults associated with marginal signal levels. Products maximize test signal integrity through use of advanced circuit board layout techniques that...

Read More »
High-Density Switch Matrix reduces signal integrity degradation.
Electrical Equipment & Systems

High-Density Switch Matrix reduces signal integrity degradation.

Available for EX1200 Series multifunction switch/measure units, EX1200-SMP offers 16 integrated analog backplane lines. This lets designers create 16xN matricesÂ- as well asÂ- bridge together multiple carriers to create larger matrices with up to 704x8 two-wire inputs in one chassis. Supporting system configurations for switching applications that require flexibility of crosspoint matrix...

Read More »
RF/Microwave Switches have modular design.
Electrical Equipment & Systems

RF/Microwave Switches have modular design.

Enabling high integrity signal switching between sources and measurement instruments, EX7105A and EX7204A have open-platform COTS core that can be configured for custom applications. Both RF/microwave switching solutions employ common hardware platform and software-based communications interface. Supplied in 1 U rack, half-width enclosure, EX7105A suits size-constrained RF switching applications,...

Read More »
Transient Capture Module provides time stamping.
Controls & Controllers

Transient Capture Module provides time stamping.

Equipped with 16 input channels, Model EX1200-7416 can continuously monitor variety of analog and discrete signals up to 100 V. Each channel has 8-bit DAC that can be independently programmed to set trip level. Model EX1200-7416 also detects transients that cannot normally be captured by typical DMM or scanning measurement system. As part of EX1200 LXI Class A instrument series, module records...

Read More »
Signal Conditioner offers LAN-based LXI Class A connectivity.
Computer Hardware & Peripherals

Signal Conditioner offers LAN-based LXI Class A connectivity.

Complementing EX1000 data acquisition instruments, EX10SC Modular Signal Conditioning platform provides industrial-grade 1,500 Vrms isolation and 240 Vac input protection across broad range of transducers and input types. System enables integration of thermocouple, RTD, thermistor, strain gauge, pressure, voltage, and frequency inputs into EX1000A, EX1016A, and EX1032A data stream. Input channels...

Read More »
Signal Multiplexer switches up to 576 channels.
Communication Systems & Equipment

Signal Multiplexer switches up to 576 channels.

Designed for scanning multiple points to common bus in either 2- or 4-wire configurations, Model EX1200-3096 supports thermocouple, RTD, and thermistor measurements, and is suited for testing cable harnesses, semiconductors, and PCBs. Switch and measurement operations can be tightly synchronized as part of module's embedded scan list to minimize processor overhead and optimize test throughput....

Read More »
Software

New Software Release Lowers the Cost of Modal Testing Using VTI's DSA Hardware

Irvine, CA April 8, 2009 VTI Instruments Corporation is pleased to announce a new software solution designed to enhance the modal testing capabilities of its dynamic signal analysis (DSA) product family. Dynamic Measurements, Inc. has released its new Multiple-Input-Multiple-Output (MIMO) Frequency Response Measurements component, an addition to its Acq_Mat turnkey software. Acq_Mat enables users...

Read More »

All Topics