ITT Interconnect Solutions
Santa Ana, CA 92705
Share:
ITT Interconnect Solutions Donates Charging Solution to Mississippi State University for EcoCAR Challenge
EVC Series connectors enable Level I and II charging from 15A/120V to 75A... SANTA ANA, CA - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has donated its SAE J1772 EVC Series Electric Vehicle Charging System Connector Assemblies to Mississippi State University for its entry to the EcoCAR Challenge Competition...
Read More »
PCB Connector eliminates need for board-to-board connectors.
Providing direct interface into box, APD Direct PCB Connector is connected to PCB internally, rather than with crimped cable connection. Plastic connector is sealed to IP67 and IP69K specifications for protection against dust and temporary immersion. Available in 6, 7, 19, 37, or 51-way versions with max operating voltage of 48 V, unit is equipped with 4-way configuration for sensor applications....
Read More »
Environmentally Sealed Connector meets IP65 standards.
Suited for outdoor, alternative energy applications, PowerLock Box with flange offers secure sealing into equipment panel cut-outs. Lidded and non-lidded versions, available with 400 or 660 A ratings, feature 107 mm extended front panel, providing seal around entire box. Solution uses standard PowerLock connectors, with all ports keyed and color-coded for sequential mating to ensure ground is...
Read More »
PC Card Kits come in snap-on, ultrasonic versions.
Providing complete EMI shielding, PCMCIA RoHS compliant I/O kits include snap-fit model with pair of mechanically-assembled SS card covers that provide PC card with torsional stiffness and optimal drop test performance. With ultrasonic kit, plastic cover set is welded around card ultrasonically to create solid protective shell. Both secure, tamper-proof kits feature standard card end closure...
Read More »Connectors target commercial vehicle applications.
Featuring high-grade PBT housing and copper alloy contacts, APD 1, 7, and 51-way Connectors resist high vibration and attack by aggressive liquids. Secure connector coupling is assured with bayonet mating and secondary contact locking. With max current per contact of 70 A, useable wire sizes from 0.25-50 mmÃ-², and IP69K rating, RoHS-compliant connectors meet DIN 72585 requirements and are...
Read More »Rugged Audio Connectors withstand extreme field use.
Available in configurations of 2-7 positions, XLR audio connectors feature quick disconnect latch lock and multiple plating options. Suited for digital audio applications, rugged units feature precision-machined contacts, shock absorbent rubber insulators, and lightweight aluminum shells. RoHS compliant connectors are specified for use in microphones, recorders, VCRs, amplifiers, mixers, and TV...
Read More »
GPS Contact can transmit/receive signals above 1.8 GHz.
Achieving mating force of 0.3 N with 0.1 mm beam movement, Universal GPS Contact is 1.8 mm dry circuit pressure contact that when mated and deflected, maintains true contact beam positioning with no conductivity to side walls. It features domed contact mating point and side wings, and has deflection of 0.9 mm, and X-Y-Z movement that facilitates flexible antenna connection. Applications include...
Read More »
Circular Connectors feature IP69K-sealed design.
Available in 1-, 7-, and 51-way contact designs with wire sizes from 0.25-50 mmÃ-², APD Series features bayonet mating and secondary contact locking. Units have copper alloy contacts with tin or gold plating and high-grade PBT housings. Rated to 70 A per contact, connectors meet all DIN 72585 requirements. Sealing capabilities make connectors suited for off-road vehicles, boats, industrial...
Read More »
Interconnect Package integrates Ethernet, MVB cable lines.
FRCIR connector incorporates M12 contacts into CIR Series connector hardware. Four conductor wires and one braid of shielded cables are integrated into M12 contacts, and multiple M12 contacts and cables are regrouped within connector via plastic insert and connector accessories. Size 32, RoHS-compliant connectors feature aluminum alloy shells with black epoxy urethane varnish; M12 contacts are...
Read More »
ITT Interconnect Solutions Donates Charging Solution to Mississippi State University for EcoCAR Challenge
EVC Series connectors enable Level I and II charging from 15A/120V to 75A... SANTA ANA, CA - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has donated its SAE J1772 EVC Series Electric Vehicle Charging System Connector Assemblies to Mississippi State University for its entry to the EcoCAR Challenge Competition...
Read More »ITT Cannon and Digi-Key Corporation Sign Global Distribution Agreement
SANTA ANA, CA - February 8, 2011 - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, and Electronic components distributor Digi-Key Corporation, recognized by design engineers as having the industry's broadest selection of electronic components available for immediate shipment, have entered into an agreement in which...
Read More »ITT Interconnect Solutions' UK Facility Achieves SC21 Silver Accreditation
SANTA ANA, CA - October 26, 2010 - ITT Interconnect Solutions (ICS), a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has announced that its UK facility was recently awarded Silver Accreditation in the Supply Chains for the Twenty-first Century (SC21) national aerospace and defense supply chain improvement program. The SC21 was established four years...
Read More »
PCB Connector eliminates need for board-to-board connectors.
Providing direct interface into box, APD Direct PCB Connector is connected to PCB internally, rather than with crimped cable connection. Plastic connector is sealed to IP67 and IP69K specifications for protection against dust and temporary immersion. Available in 6, 7, 19, 37, or 51-way versions with max operating voltage of 48 V, unit is equipped with 4-way configuration for sensor applications....
Read More »
Environmentally Sealed Connector meets IP65 standards.
Suited for outdoor, alternative energy applications, PowerLock Box with flange offers secure sealing into equipment panel cut-outs. Lidded and non-lidded versions, available with 400 or 660 A ratings, feature 107 mm extended front panel, providing seal around entire box. Solution uses standard PowerLock connectors, with all ports keyed and color-coded for sequential mating to ensure ground is...
Read More »
PC Card Kits come in snap-on, ultrasonic versions.
Providing complete EMI shielding, PCMCIA RoHS compliant I/O kits include snap-fit model with pair of mechanically-assembled SS card covers that provide PC card with torsional stiffness and optimal drop test performance. With ultrasonic kit, plastic cover set is welded around card ultrasonically to create solid protective shell. Both secure, tamper-proof kits feature standard card end closure...
Read More »Connectors target commercial vehicle applications.
Featuring high-grade PBT housing and copper alloy contacts, APD 1, 7, and 51-way Connectors resist high vibration and attack by aggressive liquids. Secure connector coupling is assured with bayonet mating and secondary contact locking. With max current per contact of 70 A, useable wire sizes from 0.25-50 mmÃ-², and IP69K rating, RoHS-compliant connectors meet DIN 72585 requirements and are...
Read More »ITT Receives Rail Industry's Internationally-Recognized IRIS Certification
Certification encourages supply chain transparency, expands market potential... SANTA ANA, CA - March 9, 2009 - ITT Interconnect Solutions, a leading global manufacturer and supplier of connectors, interconnects, and cable assemblies, has received IRIS (International Railway Industry Standard) certification for its operations based in Lainate, Italy. IRIS is a globally recognized certification...
Read More »Rugged Audio Connectors withstand extreme field use.
Available in configurations of 2-7 positions, XLR audio connectors feature quick disconnect latch lock and multiple plating options. Suited for digital audio applications, rugged units feature precision-machined contacts, shock absorbent rubber insulators, and lightweight aluminum shells. RoHS compliant connectors are specified for use in microphones, recorders, VCRs, amplifiers, mixers, and TV...
Read More »
GPS Contact can transmit/receive signals above 1.8 GHz.
Achieving mating force of 0.3 N with 0.1 mm beam movement, Universal GPS Contact is 1.8 mm dry circuit pressure contact that when mated and deflected, maintains true contact beam positioning with no conductivity to side walls. It features domed contact mating point and side wings, and has deflection of 0.9 mm, and X-Y-Z movement that facilitates flexible antenna connection. Applications include...
Read More »