Advanced Antivibration Components - AAC

Vibration Isolators provide optimal damping performance.
Communication Systems & Equipment

Vibration Isolators provide optimal damping performance.

Designed for light to medium loads, Series V10Z62MGT Silicone Gel Tape comes in 1,000 mm lengths and thicknesses of 1, 2, and 3 mm. Each thickness is available in 10 and 20 mm widths. Series V20Z62MGC Silicone Chip Isolators come in thicknesses from 3-10 mm and 3 sheet sizes of 10 x 10, 15 x 15, and 20 x 20 mm. Operating from -40 to 212°F, metric isolators offer chemical and weather resistance...

Read More »
Gel Paste offers thermal conductivity up to 6.5 W/moK.
Materials

Gel Paste offers thermal conductivity up to 6.5 W/moK.

Supplied in syringe to facilitate application, V30Z63MDP Series features specific volume resistance ratio up to 7.2 x 1014 Wocm, dissipation factor down to 0.0004 at 1 MHz, and breakdown voltage up to 9.6 kV/mm. RoHS-controlled substance is used to fill gaps around heat sources such as semiconductors. Other applications involve surface, underside, and lead heat sources such as ICs, as well as...

Read More »
Spring Suspension Mounts target HVAC applications.
Communication Systems & Equipment

Spring Suspension Mounts target HVAC applications.

Designed to isolate suspended products weighing 22-705 lb, V11Z71MKSH Series includes 11 mounts constructed with zinc-plated steel housing. Spring is painted hard drawn steel, and lower plate is neoprene. By having rubber on both ends of coil spring, units can minimize vibrations for wide range of frequencies. Mounts are best suited for hanging fans, distribution pipes, and ducts from ceilings.

Read More »
Silicone Thermal Gel Sheets dissipate heat in electronics.
Materials

Silicone Thermal Gel Sheets dissipate heat in electronics.

Measuring 15.7 x 15.7 and 0.5-3 mm thick, V30Z62MCH Series is usable over temperature range of -40 to +392°F and offers thermal conductivity range of 1.8-6.5 Wm-k. Soft gel sheets provide electric insulation, and are both RoHS-compliant and UL-94 V-0 approved. Applications include computer internal components such as CPU, motherboards, power transformers, power supply equipment, and electronic...

Read More »
Natural Rubber Suspension Mounts from AAC are Designed for Suspending from 56 to 112 Lb
Communication Systems & Equipment

Natural Rubber Suspension Mounts from AAC are Designed for Suspending from 56 to 112 Lb

(New Hyde Park, New York, USA; June 4, 2009) - Natural rubber suspension mounts from Advanced Antivibration Components (AAC) are designed to isolate suspended products that weigh from 56 lb up to 112 lb A popular use for these vibration isolators involves their use in suspending piping in heating, ventilating and air conditioning - HVAC applications. There are 4 mounts identified as the V10Z72MTG...

Read More »
Metric Vibration Mounts operate from -40 to 392°F.

Metric Vibration Mounts operate from -40 to 392°F.

Offering chemical resistance and low compression set, V10Z61MSF Series silicone gel vibration mounts are designed for light-medium loads from 2.8-7.2 lb up to 16.5-27.6 lb per mount. Highest damping effect arises when gel is compressed 10-30%, and performance is maintained even after repeated use. Since mounts contain nothing harmful, they are considered environmentally friendly.

Read More »
Vibration Isolators have minimal horizontal deflection.

Vibration Isolators have minimal horizontal deflection.

Operating from -40 to 392°F, V10Z61MSN Series silicon gel pad vibration isolators are intended for light to medium loads from 1.1-4.4 lb to 33.1-110.2 lb/leg per mount. Highest damping effect arises when gel is compressed 10-30%. Offering chemical resistance and low compression set, units maintain same performance even after repeated use. They contain nothing harmful and are considered...

Read More »
Silicone Gel Vibration Mounts offer chemical resistance.

Silicone Gel Vibration Mounts offer chemical resistance.

Operating from -40 to 392°F, double-studded V10Z61MTH and V10Z61MMN Series is suited for light to medium loads from 4.4-7.7 lb up to 18.7-27.6 lb per mount. Highest damping effect arises when gel is compressed 10-30%. Environmentally friendly units are low in compression set and maintain same performance even after repeated use. Recommended frequencies range from 14-23 Hz.

Read More »
CNF Type Mounts adjust stiffness in response to load.
Communication Systems & Equipment

CNF Type Mounts adjust stiffness in response to load.

Featuring embedded internal gaps and supports, Series V10Z24 constant natural frequency mounts (CNF Type) increase their stiffness proportionally with applied load. This keeps natural frequency of mount constant, irrespective of load change. Model V10Z24M10040LD covers 400-1,000 lb range, while V10Z24M10040HD handles loads from 700-1,900 lb. Model V10Z24-575175 covers ranges up to 8,000 lb for...

Read More »
Heavy-Duty Vibration Mounts suit corrosive environments.

Heavy-Duty Vibration Mounts suit corrosive environments.

Using stainless steel mesh as isolating medium, V10Z27 Series includes 3 base-mounted vibration and shock isolators that can withstand compression loads up to 10x their rated static loads. Free standing height of these 3-¼ in.-² units is 1 61/64 in., which compresses under static load to 1 53/64 in. Rated for temperatures from -94 to +347°F, products exhibit natural frequency from 14-22 Hz,...

Read More »

All Topics