Henkel Corporation

Comprised of low-odor, low-bloom adhesives, Loctite-® 403™/408™/455™/460™ minimize frosting near bond line and provide bond strengths of 2,600 psi on dry or acidic surfaces. Loctite 403 medium-viscosity cyanoacrylate adhesive fills gaps to 0.008 in.; water-thin, wicking grade Loctite 408 fill gaps as small as 0.002 in.; low-viscosity Loctite 460 works on close-fitting parts with...

Comprised of low-odor, low-bloom adhesives, LoctiteÂ-® 403™/408™/455™/460™ minimize frosting near bond line and provide bond strengths of 2,600 psi on dry or acidic surfaces. Loctite 403 medium-viscosity cyanoacrylate adhesive fills gaps to 0.008 in.; water-thin, wicking grade Loctite 408 fill gaps as small as 0.002 in.; low-viscosity Loctite 460 works on...

Casein-Based Labeling Adhesives are zinc- and borax-free.

Eticol labeling adhesives are based on natural polymers obtained from casein, minimizing wastewater produced- by bottlers and maximizing shelf life and quality of products. Flexible, water-based bottle labels maintain bond on moist and cold surfaces and also in presence of condensation on glass. They are available in variants with high wet tack and ice-water resistance, and can be used with...

Casein-Based Labeling Adhesives are zinc- and borax-free.

Eticol labeling adhesives are based on natural polymers obtained from casein, minimizing wastewater producedÂ- by bottlers and maximizing shelf life and quality of products. Flexible, water-based bottle labels maintain bond on moist and cold surfaces and also in presence of condensation on glass. They are available in variants with high wet tack and ice-water resistance, and can be...

Mold Release Agents and Sealers help produce polyurethane foams.

Exceptional Performance on a Variety of Substrates, Including Polyurethane Foams and Thermoplastics Rocky Hill, Conn. - A new line of Loctite® Frekote® mold release agents and sealers from Henkel Corporation is designed for use on a variety of substrates, including rigid and elastomeric open cell polyurethane foams. Easy to apply and fast curing, Loctite® Frekote® PU7000™, PU7001™ and...

Mold Release Agents and Sealers help produce polyurethane foams.

Exceptional Performance on a Variety of Substrates, Including Polyurethane Foams and Thermoplastics Rocky Hill, Conn. - A new line of Loctite-® Frekote® mold release agents and sealers from Henkel Corporation is designed for use on a variety of substrates, including rigid and elastomeric open cell polyurethane foams. Easy to apply and fast curing, Loctite® Frekote® PU7000™, PU7001™...

High-Temperature Adhesives fixture in 15 seconds or less.

Cyanoacrylates Fixture in Seconds and Maintain High Bond Strength at 250-ºF Rocky Hill, Conn. -- The newest surface insensitive Loctite® Instant Adhesives from Henkel Corporation maintain their bond strength in operating temperatures as high as 250ºF, yet fixture in just 15 seconds or less. Loctite® 401™, Loctite® 406™, Loctite® 495™ and Loctite® 454™ surface...

High-Temperature Adhesives fixture in 15 seconds or less.

Cyanoacrylates Fixture in Seconds and Maintain High Bond Strength at 250ºF Rocky Hill, Conn. -- The newest surface insensitive Loctite® Instant Adhesives from Henkel Corporation maintain their bond strength in operating temperatures as high as 250ºF, yet fixture in just 15 seconds or less. Loctite® 401™, Loctite® 406™, Loctite® 495™ and Loctite® 454™ surface insensitive instant...

Sprayable Anti-Spatter Coating protects welding equipment.

Designed for use on manual and automatic MIG/MAG welding, laser/plasma cutting, and spot welding equipment, Loctite-® SF7900(TM) Ceramic Shield prevents spatter adhesion for up to 8 hr with one application. Silicone-free coating dries in seconds, allowing continuous, uninterrupted welding throughout shift. By protecting shroud from spatter and allowing uninterrupted gas flow, coating helps...

Sprayable Anti-Spatter Coating protects welding equipment.

Designed for use on manual and automatic MIG/MAG welding, laser/plasma cutting, and spot welding equipment, LoctiteÂ-® SF7900(TM) Ceramic Shield prevents spatter adhesion for up to 8 hr with one application. Silicone-free coating dries in seconds, allowing continuous, uninterrupted welding throughout shift. By protecting shroud from spatter and allowing uninterrupted gas flow, coating helps...