Manncorp
Huntingdon Valley, PA 19006
Vapor Phase Soldering System offers inline convection alternative.
Along with- 6–9 min cycle times or less, programmable 4040 provides SMT assemblers with optimized soldering quality, instant product changeovers, and 0% risk of overheating.- Design enables installation in any workspace without requiring complex ductwork and external venting, while heat transfer efficacy and gentle conditions of vapor phase process minimize exhaust generation. Other features...
Read More »
SMT/BGA Rework System handles any SMD repair.
Along with 1.3 million pixel, split-vision CCD camera and 15 in.,- 1080p Hi-Res display, RW1210 features touchscreen UI that contains selectable operating modes- for fully automated removal, placement, and soldering sequences. Board holder handles PCBs up to 17 x 14.25 in., and joystick-controlled zoom with 230x magnification and LED lighting provide clear, superimposed views of component leads...
Read More »
Manncorp Installs SMT Assembly Line in Guadalajara
Manncorp, a U.S.-based supplier of PCB assembly equipment, has installed an SMT assembly line for Continental Automotive as part of a rapid prototyping laboratory at the Instituto Tecnológico Superior de Zapopan (ITSZ) in Guadalajara. Continental Automotive Guadalajara México, S.A. de C.V., part of German-based Continental Corporation partnered with the ITSZ campus to extend its innovation...
Read More »
Selective Soldering System offers high-precision jet-fluxing.
Featuring laser-controlled wave height compensation, Model IS-T-300 handles double-sided and mixed technology PCBs up to 300 x 500 mm, with option for 460 x 700 mm. All-titanium solder pot and pump assembly, compatible with lead-free or eutectic solder, is mounted to X/Y/Z-axis drive mechanism for repeatable, point-to-point and continuous soldering. With 3–14 mm diameters, 360-
Read More »
Rework System offers rapid-response IR underheating.
Equipped with 1.3 million pixel, split-vision CCD camera and 15 in. 1080p HD display, RW1200 SMT/BGA Rework System handles boards up to 16.1 x 14.6 in. System features joystick-controlled zoom with 230x magnification, and LED lighting that provides ultra-clear, superimposed views of component leads and PCB solder pads. In conjunction with Z-axis drive mechanism and automatic height sensing,...
Read More »
Automatic Inline Stencil Printer is fully programmable.
With capability for 01005 chips, -µBGAs, and 12-mil ultra-fine-pitch components, AP430- features SMEMA-compatible conveyor and PCB holder that accommodate boards with print areas up to 17.75 x 13.75 in.. Quick-change stencil clamp with programmable stopper accepts frames up to 29 x 29 in., and ballscrew drives work in unison with CCD alignment camera to provide X, Y, and Ɵ axis correction for...
Read More »
Precision 3-Axis Dispensing Systems suit SMT assembly tasks.
Combining 3-axis robots with integrated digital dispense controllers, 2004D Series consists of
Read More »
Dip Soldering Systems suit short-run, batch applications.
Touchscreen controlled models of Auto-Dip series feature programmable preheat and dip height settings- as well as adjustable, finger-type PCB holder that firmly grips edges of board throughout soldering cycle. Accommodating heavy component-laden assemblies and customized pallets of small, irregularly-shaped PCBs, systems offer programmable speed, dip angle, lift angle, and dwell time. Largest...
Read More »
Benchtop Reflow Oven features Android OS and touchscreen UI.
Simulating environment of inline reflow system, Wi-Fi-enabled MC-301 measures 27 x 19 x 11 in., features multi-zone heating chamber, and can be used for prototyping, manufacturability testing, and short-run batch production. Android control app lets SMT assemblers and product developers meet solder paste manufacturer specifications for preheat, soak, reflow, and cooling phases of recommended...
Read More »
Print-Place-Reflow Package performs prescision, high-mix assembly.
Occupying minimal floor space, 2500-MV accommodates companies that require short-run, in-house production capability for ultra-precise, high component-mix SMT assembly. Included MC-400 pick and place system features Cognex-® on-the-fly and bottom vision alignment for high-accuracy, 2,500 cph placement of- SMDs. Additional package components include heavy-duty MC-110 stencil printer, which...
Read More »LED Living Technology Finds New Management and a New Home
Huntingdon Valley, PA, May 7th — Following in the footsteps of founder Oliver Szeto, LED Living Technology will continue its tradition of sustainable lighting solutions at the forefront of the LED industry as it joins the family at Manncorp. With the current national push for onshore production, LED Living Technology is committed to offering the same high-quality, American-made products under...
Read More »
Vapor Phase Soldering System offers inline convection alternative.
Along with- 6–9 min cycle times or less, programmable 4040 provides SMT assemblers with optimized soldering quality, instant product changeovers, and 0% risk of overheating.- Design enables installation in any workspace without requiring complex ductwork and external venting, while heat transfer efficacy and gentle conditions of vapor phase process minimize exhaust generation. Other features...
Read More »
SMT/BGA Rework System handles any SMD repair.
Along with 1.3 million pixel, split-vision CCD camera and 15 in.,- 1080p Hi-Res display, RW1210 features touchscreen UI that contains selectable operating modes- for fully automated removal, placement, and soldering sequences. Board holder handles PCBs up to 17 x 14.25 in., and joystick-controlled zoom with 230x magnification and LED lighting provide clear, superimposed views of component leads...
Read More »
Manncorp Installs SMT Assembly Line in Guadalajara
Manncorp, a U.S.-based supplier of PCB assembly equipment, has installed an SMT assembly line for Continental Automotive as part of a rapid prototyping laboratory at the Instituto Tecnológico Superior de Zapopan (ITSZ) in Guadalajara. Continental Automotive Guadalajara México, S.A. de C.V., part of German-based Continental Corporation partnered with the ITSZ campus to extend its innovation...
Read More »
Selective Soldering System offers high-precision jet-fluxing.
Featuring laser-controlled wave height compensation, Model IS-T-300 handles double-sided and mixed technology PCBs up to 300 x 500 mm, with option for 460 x 700 mm. All-titanium solder pot and pump assembly, compatible with lead-free or eutectic solder, is mounted to X/Y/Z-axis drive mechanism for repeatable, point-to-point and continuous soldering. With 3–14 mm diameters, 360-
Read More »
Rework System offers rapid-response IR underheating.
Equipped with 1.3 million pixel, split-vision CCD camera and 15 in. 1080p HD display, RW1200 SMT/BGA Rework System handles boards up to 16.1 x 14.6 in. System features joystick-controlled zoom with 230x magnification, and LED lighting that provides ultra-clear, superimposed views of component leads and PCB solder pads. In conjunction with Z-axis drive mechanism and automatic height sensing,...
Read More »
Automatic Inline Stencil Printer is fully programmable.
With capability for 01005 chips, -µBGAs, and 12-mil ultra-fine-pitch components, AP430- features SMEMA-compatible conveyor and PCB holder that accommodate boards with print areas up to 17.75 x 13.75 in.. Quick-change stencil clamp with programmable stopper accepts frames up to 29 x 29 in., and ballscrew drives work in unison with CCD alignment camera to provide X, Y, and Ɵ axis correction for...
Read More »
Precision 3-Axis Dispensing Systems suit SMT assembly tasks.
Combining 3-axis robots with integrated digital dispense controllers, 2004D Series consists of
Read More »
Dip Soldering Systems suit short-run, batch applications.
Touchscreen controlled models of Auto-Dip series feature programmable preheat and dip height settings- as well as adjustable, finger-type PCB holder that firmly grips edges of board throughout soldering cycle. Accommodating heavy component-laden assemblies and customized pallets of small, irregularly-shaped PCBs, systems offer programmable speed, dip angle, lift angle, and dwell time. Largest...
Read More »
Benchtop Reflow Oven features Android OS and touchscreen UI.
Simulating environment of inline reflow system, Wi-Fi-enabled MC-301 measures 27 x 19 x 11 in., features multi-zone heating chamber, and can be used for prototyping, manufacturability testing, and short-run batch production. Android control app lets SMT assemblers and product developers meet solder paste manufacturer specifications for preheat, soak, reflow, and cooling phases of recommended...
Read More »