XP Power

Electrical Equipment & Systems

Miniature DC/DC Converters maintain DIP-24 pin-out.

Supplied in 1 x 0.8 x 0.4 in. shielded metal package, JCA series board-mounted, low-power DC/DC converters come in 2, 3, 4, and 6 W models that each offer choice of 5, 12, 24, and 48 Vdc nominal input voltages. Input options, covering 2:1 voltage range, are 4.5-9.0, 9-18, 18-36 Vdc, or 36-75 Vdc with under-voltage lockout as standard. For each input voltage, single output models offer +3.3, +5,...

Read More »

Ultra-Wide Input DC/DC Converter comes in 2 x 1 in. package.

Including single and dual output versions, Series JTH15 15 W DC/DC converters can accommodate wide 4:1 range of input voltages ranging from 9-36 Vdc or 18-72 Vdc. Single output device is available with +3.3, +5, +12, or +15 V rails, while dual version has ±5, ±12, or ±15 outputs. Operating from -40 to +100°C temperature range with derating above +60°C, models are...

Read More »
Electrical Equipment & Systems

Power Supplies feature industrial and medical approvals.

Measuring 4.5 x 2.5 x 1.2 in., ECM100 Series 100 W AC/DC Power Supplies offer dual, triple, and quad output variants with power density of 7.4 W/cu-in. Two independent converters provide fully regulated auxiliary outputs. Outputs V1 and V2 are regulated by control loop, while V3 and V4 are post regulated. Suited for limited space applications, open frame power supplies provide full power with 5...

Read More »
Electronic Components & Devices

Active Filter protects DC-DC converters to MIL-STD 1275A-D.

Suited for harsh electrical environments, 500 W Model DSF500 protects DC-DC converters from surges, spikes, and ripples found on electrical system of any military platform. Input voltage is 10-34 Vdc, while output voltage is tracked and clamped to below 36 Vdc. Measuring 2.28 x 2.28 x 65 in., unit also protects against over-current conditions. Should demand exceed 28 A, warning signal can be used...

Read More »
Electrical Equipment & Systems

Isolated DC/DC Converter is suited for harsh environments.

Designed for systems that need to be powered from 12 Vdc and 24/28 Vdc supplies, MQP120 series accommodates 9-40 Vdc input and is rated to 120 W. Standard output options provide voltages of 3.3, 5, 12, 15, and 24 Vdc. Measuring 3.74 x 0.45 x 2.56 in., fully encapsulated series exhibits power density of 26.7 W/in.Â-³ and is resistant to effects of dust, vibration, and shock. Products can meet...

Read More »
Electrical Equipment & Systems

AC/DC Power Supplies can be PCB- or chassis-mounted.

Comprised of 10 W (ECL10) and 15 W (ECL15) versions, ECL series is available in open frame PCB-mount, encapsulated PCB-mount, and open frame chassis-mount formats. ECL10 measures 1.0 x 2.0 x 0.9 in., offering 5.6 W/in.Â-³ power density. Both ECL10 and ECL15 offer single output voltages of 3.3, 5, 9, 12, 15, 24, and 48 Vdc. Full power is supplied across entire input voltage range of 85-264...

Read More »
Electrical Equipment & Systems

DIN Rail Power Supply offers input configuration choice.

Single output, 480 W-rated DNR480 offers universal input, accepting voltages from 90-264 Vac (single phase) without switch selection or 340-575 Vac (3-phase) - depending on model. Both 24 and 48 Vdc output variants have adjustable outputs: 22.5-28.5 Vdc for 24 V model, and 47.0-56.0 Vdc for 48 V model. For applications requiring increased power, up to 3 units may be connected in parallel. Each...

Read More »
Electrical Equipment & Systems

Power Supply achieves 11.2 W/in.³ power density.

Available in 12, 24, and 48 Vdc output versions, Model MFA350 delivers 364 W across input range of 90-264 Vac from 3.2 x 6.8 x 1.5 in. U-bracket package. It includes 12 V, 1 A fan supply and 5 V, 0.3 A standby supply. Signal set features ac fail, dc OK, remote on/off, and active current sharing. Requiring only 13 cfm airflow, unit functions at full power from -10 to +50°C and up to...

Read More »
Electrical Equipment & Systems

Power Supplies offer up to 6.9 W/in.³ power density.

Convection cooled 150 W Model SDS150 open frame version measures 3 x 5 x 1.44 in. and offers power density of 6.9 W/in.Â-³, while U channel, 3.2 x 5 x 1.54 in. version has power density of 6.1 W/in.³. Featuring up to 90% efficiency, universal input of 90-264 Vac, and offered in 8 single output 9-48 Vdc voltage versions, power supplies provide overvoltage, overcurrent, and short...

Read More »
Electrical Equipment & Systems

AC/DC Power Supply suits industrial and medical applications.

Providing output power of up to 1,000 W over input range of 85-264 Vac, Model fleXPower X10 can also deliver 2,400 W at high line using its double deck feature. Power supply also provides separate 5 V standby output to supply critical monitoring circuits and features multiple logic signals such as global inhibit, AC OK, and DC OK. Operating over temperature range of -20 to +70Â-ºC, product...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers