Kontron

Embedded Single Board Computer features 64-bit I/O bus.
Computer Hardware & Peripherals

Embedded Single Board Computer features 64-bit I/O bus.

Available with 64-bit PCI-x or 32-bit PCI I/O, 5.25 in. Mungo560 supports all Pentium M and Celeron M CPUs up to 2.4 GHz while delivering Pentium 4 performance in embedded applications. Features include Intel 855GME graphics memory controller hub chip set and 6300ESB I/O controller hub. SBC is also equipped with Intel Extreme Graphics controller with AGP and JILI to support LCD or LVDS video....

Read More »
Embedded Module facilitates I/O and video performance.
Computer Hardware & Peripherals

Embedded Module facilitates I/O and video performance.

Utilizing Intel® Celeron® ULV processors paired with Intel Northbridge and Southbridge chipsets, Model ETX-P3Tx provides complete PC functionality in component that plugs into application-specific carrier board. It includes ATI Mobility Radion M6 or M7 video controller and 4 USB 2.0 ports for graphics and I/O intensive applications. Additional features include 2x IDE ports with...

Read More »
Rack-Mount Chassis is suited for small embedded boards.
Computer Hardware & Peripherals

Rack-Mount Chassis is suited for small embedded boards.

Able to accommodate 3.5 and 5.25 in., EPIC, and ETX form factors, MiniMorph 19 industrial-grade, 1U chassis measures 12 in. deep and utilizes changeable base plate and rear panel. It can be configured to use various combinations of embedded boards and I/O form factors (PCI, PC/104 and JFLEX). Chassis features 180 W, auto-ranging power supply with 1U integrated power supply fan, 2 internal 2.5 in....

Read More »
Embedded Module features Intel i815E chipset.
Architectural & Civil Engineering Products

Embedded Module features Intel i815E chipset.

Model ETX-P3T provides complete PC functionality in component that plugs into application-specific carrier board. Power management is achieved using ACPI and APM 1.2, allowing fanless cooling. Module supports Intel 82815 chipset with integrated Graphics Core, 2 IDE ports with support for ATA 33, 4 USB 2.0 ports, up to 512 Mbytes SDRAM, 10/100 Mbit Base-T Ethernet, LVDS up to SXGA 1,280 x 1,024,...

Read More »
Computer Hardware & Peripherals

Computer Modules are built around STPC Elite processor.

Computer-On-Modules, ETX-e.lite and DIMM-PC/lite offer customizable solutions for high-volume, embedded applications. Rather than developing complex designs from scratch, engineers can use STPC Elite processors to use same processor on plug and play modules. Applications include building security, low-end numerical control, SOHO appliances, GPS/GPRS solutions, set top boxes, and low-power test...

Read More »
CPU Boards are offered in 6U and 3U form factors.
Computer Hardware & Peripherals

CPU Boards are offered in 6U and 3U form factors.

Models CP6000, CP6011, and CP306 cPCI single slot processor boards are equipped with Pentium® M processor 745 running at 1.8 GHz and 2 Mb of L2 cache. CP6000, with 4 Gbit Ethernet ports, supports data, telecommunications, and industrial automation applications. CP6011, with dual PMC sites, suits network infrastructure applications. Compact CP306 applies in robotics and data acquisition...

Read More »
Computer Hardware & Peripherals

Single Board Computer features ePCI-200 CPU board.

Model 400-H33E 18 in. SBC industrial 4U platform includes 3 GHz Intel Pentium 4 processor, 478-pin processor technology, and PCI-X support up to 133 MHz. It also incorporates 2 independent PCI buses, up to 4 GB DDR SDRAM, onboard ATI® Mobility Radeon 3D dual-screen video controller with integrated 16 MB of DDR SDRAM, and dual Fast Ethernet controller. Also standard: three 5.25 in. front...

Read More »
Computer Hardware & Peripherals

CompactPCI 3U CPU Board withstands harsh environments.

Model CP306, based on Intel® Pentium® M processor, offers 1.6 GHz clock rate, 1 MB L2 cache, 333 MHz memory clock rate, and 400 MHz processor side bus. On-board communication interfaces include 1 x Gigabit Ethernet, 1 x Fast Ethernet, 4 x USB 2.0, and up to 4 COM channels. Dual ATA100 interface and CompactFlash socket are standard. Available as single or dual slot, board is suitable...

Read More »
Architectural & Civil Engineering Products

CompactPCI Card has 3U height.

RocketPort® CompactPCI (cPCI) serial card employs Kontron CP302 Intel® Mobile Pentium III processor based CPU board and CP-ASM-4 cPCI chassis. Product provides up to 16 RS-232 or RS-422 connections from single cPCI expansion slot. It conforms to PICMG 2.0 Revision 3.0 specification for cPCI expansion cards within PCI industrial computers.

Read More »
Processor Board accommodates 2 expansion modules.
Computer Hardware & Peripherals

Processor Board accommodates 2 expansion modules.

Low-power 3U CompactPCI CP321, with Motorola Kahlua II PowerPC processor for mission-critical industrial or military applications, has two 32-pin DIP sockets that permit memory expansion using DiskOnChip, Flash chip, or SRAM. Operating at up to 330 MHz and packaged in 3U/4HP design, board accommodates up to 256 Mbyte of soldered SDRAM at 133 MHz, and 8 Mbyte of soldered Flash memory for boot code...

Read More »

All Topics