Hielscher USA, Inc.
Ringwood, NJ 07456

Stainless Steel Flow Cell serves small-volume ultrasonic processes.
Developed for intensive ultrasonic processes of small volumes, stainless steel fc2clampk has no small orifices or hidden corners that would allow material settling. Cooling jacket allows control of temperature during high energy input, and design can be disassembled and wiped clean. Flow cell reactors meet clean-in-place and sterilize-in-place requirements and are autoclavable.
Read More »
Industrial Ultrasonic Processor runs continuously at 2,000 W.
With typical flow rates from 2-10 mÂ-³/day, Model UIP2000hd is suited for liquid processing, including emulsification, dispersing, particle size reduction disintegration, extraction, and homogenizing. Processor supports sonotrode amplitudes up to 170 micron, liquid pressures to 10 bar, and liquid flow rates to 15 lpm. System delivers power at controlled amplitude level, so that magnitude of...
Read More »
Glass Flow Cell targets ultrasonic emulsifying applications.
Providing flow rate of approximately 1 lpm, Ultrasonic Glass Reactor Vessel offers clear visibility of cavitational process. Unit features 2 feedports on bottom side, which can supply 2 immiscible fluids into vessel. Fluid exits flow cell by discharge port on left side after passing cavitational hot spot generated at sonotrode. To control processing temperature, cooling or heating liquid can be...
Read More »Ultrasonic Mixer features explosion-proof design.
With 220-1,100 gal/day processing capacity, 1.0 kW Model UIP1000-Exd is suited for inline mixing and dispersing of flammable liquids. Transducer and flow cell are stainless steel, while sonotrode is made of titanium. Located inside noise-insulating chamber, flow cell is pressurizable up to 100 psig and jacketed for temperature control. Available for 115 or 230 V operation, ATEX and FM certified...
Read More »
Liquid Atomizer/Nebulizer operates at frequency of 1.6 MHz.
Comprised of transducer and generator with 2 m connection cable, UM20-1.6 megahertz processor is suited for atomizing, nebulizing, fogging, and spraying of samples in analyzing processes. Ultrasonic device, designed for formation of aerosols, processes liquids of up to 500 cp at rates to 450 ml/hr. Droplet sizes down to 1 micron can be achieved without heat transfer. Operable in air, product has...
Read More »
Ultrasonic Cleaning Module enables wire/tape cleaning.
Series USCM System cleans ferrous, non-ferrous, copper, high/low-carbon steel, glass, and plastic. It removes oil, grease, stearate, soap, and dust and is capable of single-strand and multiple-strand cleaning. Each system includes SS liquid tank, air wipe for final drying, control cabinet for ultrasonic generators, and PLC. Choice of 5 different ultrasonic processors is offered, from 250-4000 W....
Read More »
Ultrasonic Reactor Set incorporates 1,000 W processor.
Ultrasonic Flow Cell Set UIP1000 includes all items required for research and testing of ultrasonic liquid processes. It combines ultrasonic processor with stainless steel flow cell, 2 sonotrodes, boosters, and power meter. Sufficient for flow rates to 5 gpm, unit employs amplitude control feature that enables users to process liquid at amplitudes from 1 to ~50 microns. Manual valve, supplied at...
Read More »
Ultrasonic Processor treats liquids in large scale.
Model UIP16000 provides continuous power of 16,000 W with over 80% efficiency. Generator, transducer, and flow cell are housed in 2 connected stainless steel cabinets. If required, generator cabinet can be located up to 10 m from transducer with flow cell. Independent cooling system eliminates contact between aggressive air or dust and electric components. Operation can be controlled and...
Read More »
Microtiter Plate allows for continuous operation.
Used for deagglomeration, dispersing, degassing, and cell disruption, UIP250MTP allows for consistent sonication of entire microtiter plate within sonotrode. Ultrasonic power is distributed evenly through each well of microtiter plate to produce reproducible sonication effects. Amplitude of oscillation is adjustable and maintained for entire sonication period. Product consists of 250 W generator,...
Read More »
Stainless Steel Flow Cell serves small-volume ultrasonic processes.
Developed for intensive ultrasonic processes of small volumes, stainless steel fc2clampk has no small orifices or hidden corners that would allow material settling. Cooling jacket allows control of temperature during high energy input, and design can be disassembled and wiped clean. Flow cell reactors meet clean-in-place and sterilize-in-place requirements and are autoclavable.
Read More »
Industrial Ultrasonic Processor runs continuously at 2,000 W.
With typical flow rates from 2-10 mÂ-³/day, Model UIP2000hd is suited for liquid processing, including emulsification, dispersing, particle size reduction disintegration, extraction, and homogenizing. Processor supports sonotrode amplitudes up to 170 micron, liquid pressures to 10 bar, and liquid flow rates to 15 lpm. System delivers power at controlled amplitude level, so that magnitude of...
Read More »
Glass Flow Cell targets ultrasonic emulsifying applications.
Providing flow rate of approximately 1 lpm, Ultrasonic Glass Reactor Vessel offers clear visibility of cavitational process. Unit features 2 feedports on bottom side, which can supply 2 immiscible fluids into vessel. Fluid exits flow cell by discharge port on left side after passing cavitational hot spot generated at sonotrode. To control processing temperature, cooling or heating liquid can be...
Read More »Ultrasonic Mixer features explosion-proof design.
With 220-1,100 gal/day processing capacity, 1.0 kW Model UIP1000-Exd is suited for inline mixing and dispersing of flammable liquids. Transducer and flow cell are stainless steel, while sonotrode is made of titanium. Located inside noise-insulating chamber, flow cell is pressurizable up to 100 psig and jacketed for temperature control. Available for 115 or 230 V operation, ATEX and FM certified...
Read More »
Liquid Atomizer/Nebulizer operates at frequency of 1.6 MHz.
Comprised of transducer and generator with 2 m connection cable, UM20-1.6 megahertz processor is suited for atomizing, nebulizing, fogging, and spraying of samples in analyzing processes. Ultrasonic device, designed for formation of aerosols, processes liquids of up to 500 cp at rates to 450 ml/hr. Droplet sizes down to 1 micron can be achieved without heat transfer. Operable in air, product has...
Read More »
Ultrasonic Cleaning Module enables wire/tape cleaning.
Series USCM System cleans ferrous, non-ferrous, copper, high/low-carbon steel, glass, and plastic. It removes oil, grease, stearate, soap, and dust and is capable of single-strand and multiple-strand cleaning. Each system includes SS liquid tank, air wipe for final drying, control cabinet for ultrasonic generators, and PLC. Choice of 5 different ultrasonic processors is offered, from 250-4000 W....
Read More »
Ultrasonic Reactor Set incorporates 1,000 W processor.
Ultrasonic Flow Cell Set UIP1000 includes all items required for research and testing of ultrasonic liquid processes. It combines ultrasonic processor with stainless steel flow cell, 2 sonotrodes, boosters, and power meter. Sufficient for flow rates to 5 gpm, unit employs amplitude control feature that enables users to process liquid at amplitudes from 1 to ~50 microns. Manual valve, supplied at...
Read More »
Ultrasonic Processor treats liquids in large scale.
Model UIP16000 provides continuous power of 16,000 W with over 80% efficiency. Generator, transducer, and flow cell are housed in 2 connected stainless steel cabinets. If required, generator cabinet can be located up to 10 m from transducer with flow cell. Independent cooling system eliminates contact between aggressive air or dust and electric components. Operation can be controlled and...
Read More »
Microtiter Plate allows for continuous operation.
Used for deagglomeration, dispersing, degassing, and cell disruption, UIP250MTP allows for consistent sonication of entire microtiter plate within sonotrode. Ultrasonic power is distributed evenly through each well of microtiter plate to produce reproducible sonication effects. Amplitude of oscillation is adjustable and maintained for entire sonication period. Product consists of 250 W generator,...
Read More »