Memsic
Andover, MA 01810
Share:
MDP200 Pressure Sensors feature suspended bridge microstructure.
Designed for breath detection, room pressure, damper control, flow hood, fume hood and filter monitoring applications, MDP200 Bi-Directional Differential Pressure Sensors can detect pressure changes from range of 0.016 Pa to 500 Pa. Allowing 16 bit digital I2C output at update rate of less than 7 ms, units are calibrated at ± 500 Pa. Compliant to RoHS and REACH standards, sensors are based on...
Read More »
VG380 Vertical Gyro Modules offers two interface options.
Available in VG380SA and VG380ZA packages, VG380 Vertical Gyro Modules offer static and dynamic accuracy of ±0.2 and ±1.0 degrees respectively. Compatible with power supplies from 9 to 32V, VG380SA module measures 41 x 48 x 22 mm size whereas VG380ZA module 24 x 37 x 9.5 mm dimensions. VG380ZA feature SPI/UART interface. Suitable for unmanned aerial vehicle and construction equipment...
Read More »
3-Axis Magnetic Sensor used in Drone applications.
Providing 16-bit operation over wide ± 8 Gauss operating range, MMC5883MA 3-Axis Magnetic Sensor has linearity of ± 0.2% FSR, hysteresis and repeatability of 0.2% FSR on all 3-axis. Applied in industries and drone design systems, sensor enables faster algorithms for hard and soft iron interference correction and has on-chip signal processing. Sensors measures 3.0 x 3.0 x 1.0mm and operates from...
Read More »
MEMSIC to Showcase Industrial, Wearable and Smart Cities IOT Sensing Solutions at Sensors Expo and Conference 2016
With over one billion sensors shipped, MEMSIC is a world leader for the consumer electronics, communications, automotive, medical and industrial sensing sectors Sensors Expo, San Jose, CA- - June 1, 2016 - MEMSIC, Inc. plans to demonstrate its full range of advanced sensing technologies at the Sensors Expo and Conference, to be held June 21 to June 23, 2016 at the McEnery Convention Center in...
Read More »
MEMSIC Announces 1 Billion MEMS Sensors Shipped
MEMSIC sensing technology is used in almost every electronic device Andover, MA. MEMSIC, Inc., today announced the shipment of its 1 Billionth MEMS sensor. MEMSIC’s products, ranging from accelerometers to sophisticated inertial guidance systems, are used in a wide variety of applications including automotive safety systems, avionics, industrial controls, and consumer electronics. MEMSIC’s...
Read More »
Three-Axis Magnetometer targets portable devices.
Integrating monolithic 3-axis AMR sensor and signal conditioning ASIC- into 1.2 x 1.2 x 0.5 mm BGA package, MMC3630KJ Series reaches ±30 G range with 600 Hz magnetic sensing bandwidth- and- better than ±10 accuracy in eCompass applications. Self-degaussing feature can eliminate output drift due to temperature change and residual magnetism from ambient magnetic field. Series also include...
Read More »
Inclination and Tilt Sensors prevent heavy equipment from tipping.
As IP67-rated inclinometers with integrated RS-232 interface and flying lead cable, MTLT series operates from single 9–32 V supply and utilize MEMS sensors, over temperature calibration, and SmartSensing™ technology. Programmable tilt alarms, also included, can be used to lock out controls or trigger alarm or warning light. Respectively, models MTLT105S and MTLT110S are designed for...
Read More »
Bi-Directional Flow Sensor suits medical applications.
Utilizing MEMS thermal accelerometer platform, Model MFC2030 is suited for analytical instruments, anesthesia, and other medical flow devices as well as- process control and natural gas measurement. Suspended-bridge microstructure, coupled with advanced CMOS circuitry and 16-bit on-chip A/D, provides wide flow dynamic range. Highly configurable, Model MFC2030 offers multiple mounting options...
Read More »
Complete Inertial Navigation System is optimized for accuracy.
As complete system, INS380SA features built-in 48-channel GPS receiver and SmartSensing™ technology. Latter, combining Kalman-based algorithm with temperature, motion, and alignment calibration,- enables- turnkey system with better than 0.01 m/s velocity measurement accuracy. Also, integrated 3-axis magnetometer allows accurate operation when GPS signal is lost or when vehicle is stopped....
Read More »
MEMSIC to Showcase Its Latest Sensing Solutions at Sensors Expo and Conference 2015
(Andover, MA), MEMSIC, Inc. plans to demonstrate its latest advanced technologies at the Sensors Expo and Conference, to be held June 10-11 2015 at the Long Beach Convention Center, CA, booth number 245. MEMSIC products, including semiconductors and system-level devices, are designed to solve challenging inertial and flow sensing solutions across a wide range of applications. The built-in...
Read More »
MDP200 Pressure Sensors feature suspended bridge microstructure.
Designed for breath detection, room pressure, damper control, flow hood, fume hood and filter monitoring applications, MDP200 Bi-Directional Differential Pressure Sensors can detect pressure changes from range of 0.016 Pa to 500 Pa. Allowing 16 bit digital I2C output at update rate of less than 7 ms, units are calibrated at ± 500 Pa. Compliant to RoHS and REACH standards, sensors are based on...
Read More »
VG380 Vertical Gyro Modules offers two interface options.
Available in VG380SA and VG380ZA packages, VG380 Vertical Gyro Modules offer static and dynamic accuracy of ±0.2 and ±1.0 degrees respectively. Compatible with power supplies from 9 to 32V, VG380SA module measures 41 x 48 x 22 mm size whereas VG380ZA module 24 x 37 x 9.5 mm dimensions. VG380ZA feature SPI/UART interface. Suitable for unmanned aerial vehicle and construction equipment...
Read More »
3-Axis Magnetic Sensor used in Drone applications.
Providing 16-bit operation over wide ± 8 Gauss operating range, MMC5883MA 3-Axis Magnetic Sensor has linearity of ± 0.2% FSR, hysteresis and repeatability of 0.2% FSR on all 3-axis. Applied in industries and drone design systems, sensor enables faster algorithms for hard and soft iron interference correction and has on-chip signal processing. Sensors measures 3.0 x 3.0 x 1.0mm and operates from...
Read More »
MEMSIC to Showcase Industrial, Wearable and Smart Cities IOT Sensing Solutions at Sensors Expo and Conference 2016
With over one billion sensors shipped, MEMSIC is a world leader for the consumer electronics, communications, automotive, medical and industrial sensing sectors Sensors Expo, San Jose, CA- - June 1, 2016 - MEMSIC, Inc. plans to demonstrate its full range of advanced sensing technologies at the Sensors Expo and Conference, to be held June 21 to June 23, 2016 at the McEnery Convention Center in...
Read More »
MEMSIC Announces 1 Billion MEMS Sensors Shipped
MEMSIC sensing technology is used in almost every electronic device Andover, MA. MEMSIC, Inc., today announced the shipment of its 1 Billionth MEMS sensor. MEMSIC’s products, ranging from accelerometers to sophisticated inertial guidance systems, are used in a wide variety of applications including automotive safety systems, avionics, industrial controls, and consumer electronics. MEMSIC’s...
Read More »
Three-Axis Magnetometer targets portable devices.
Integrating monolithic 3-axis AMR sensor and signal conditioning ASIC- into 1.2 x 1.2 x 0.5 mm BGA package, MMC3630KJ Series reaches ±30 G range with 600 Hz magnetic sensing bandwidth- and- better than ±10 accuracy in eCompass applications. Self-degaussing feature can eliminate output drift due to temperature change and residual magnetism from ambient magnetic field. Series also include...
Read More »
Inclination and Tilt Sensors prevent heavy equipment from tipping.
As IP67-rated inclinometers with integrated RS-232 interface and flying lead cable, MTLT series operates from single 9–32 V supply and utilize MEMS sensors, over temperature calibration, and SmartSensing™ technology. Programmable tilt alarms, also included, can be used to lock out controls or trigger alarm or warning light. Respectively, models MTLT105S and MTLT110S are designed for...
Read More »
Bi-Directional Flow Sensor suits medical applications.
Utilizing MEMS thermal accelerometer platform, Model MFC2030 is suited for analytical instruments, anesthesia, and other medical flow devices as well as- process control and natural gas measurement. Suspended-bridge microstructure, coupled with advanced CMOS circuitry and 16-bit on-chip A/D, provides wide flow dynamic range. Highly configurable, Model MFC2030 offers multiple mounting options...
Read More »
Complete Inertial Navigation System is optimized for accuracy.
As complete system, INS380SA features built-in 48-channel GPS receiver and SmartSensing™ technology. Latter, combining Kalman-based algorithm with temperature, motion, and alignment calibration,- enables- turnkey system with better than 0.01 m/s velocity measurement accuracy. Also, integrated 3-axis magnetometer allows accurate operation when GPS signal is lost or when vehicle is stopped....
Read More »
MEMSIC to Showcase Its Latest Sensing Solutions at Sensors Expo and Conference 2015
(Andover, MA), MEMSIC, Inc. plans to demonstrate its latest advanced technologies at the Sensors Expo and Conference, to be held June 10-11 2015 at the Long Beach Convention Center, CA, booth number 245. MEMSIC products, including semiconductors and system-level devices, are designed to solve challenging inertial and flow sensing solutions across a wide range of applications. The built-in...
Read More »