Biotech Solutions
Vineland, NJ 08360
Share:
Adhesive Films feature color-coded end tabs.
Consisting of 50 Ã-µm thick clear polyester, SealPlate ColorTab(TM) Films minimize evaporation, prevent spillage and contamination between wells, and provide secure seal for ELISA, EIA, and similar assays. Films include color dot and white writing area on each end tab for plate ID labeling. End tabs with backing removed adhere to ends of plate and are perforated so they can be left in place...
Read More »
Reagent Reservoirs are suited for liquid handling systems.
Chemical- and heat-resistant Deep Well and Low Profile Reservoirs have pyramid bottoms that reduce reagent waste by providing collection area for low dead volume. Offered in 96- and 384-well filling formats, as well as with 6, 8, 12, and 16 partitioned channels, polypropylene reservoirs meet ASTM/SBS industry standard footprint and comply with standards for automation. Stackable, autoclavable...
Read More »
Evaporator works with 96- and 384-well plates.
Designed to facilitate dry down of 96- and 384-well microplates, ZipVap features adjustable needle height, ability to hold standard microplates or deep well plates, and flow control adjusted with fine needle valve. Heated holder can be removed for room temperature operation. Compatible with TFA, DMSO, and standard solvents, product is available in Nylon, with max temperature of 100Ã-
Read More »
Glass Tapered Inserts suit high-throughput systems.
With push-point design that provides sample access down to 10 Ã-µL, 0.7 and 1.0 mL Glass Tapered Inserts are available assembled in 96-Square Deep Well Polypropylene Microplates. Inserts and plate can be autoclaved, offer thermal stability and chemical resistance, and can be used with shakers and vortexers. Microplates assembled with 0.7 mL or 1.0 mL inserts can be sealed with respective...
Read More »Sealing Film suits needs of bio-analytical environments.
Sterile and non-sterile 96-Well Pattern Sealing Film has no adhesive around wells to prevent tacky/sticky adhesive from adhering to plastic pipette tips or metal probes. Employing solvent-free adhesive, sealing film is available in 2 or 5 mil thick Teflon, which is compatible with aqueous solutions and organic solvents and is pierceable with single/multichannel pipettors and robotic probes....
Read More »
Microplate Liners reseal after multiple injections.
Molded PTFE/Silicone and Silicone Only Liners fit round or square 96-well microplates. Liners have 96 plugs that lock into each cylindrical or tapered well. Tight seal eliminates sample cross contamination and reduces chance of sample evaporation. PTFE/Silicone Liners offer chemical compatibility and are made from TeflonÃ-®-lined, medical-grade silicone. Dark Blue Silicone Liners withstand...
Read More »Adhesive Films feature color-coded end tabs.
Consisting of 50 Ã-µm thick clear polyester, SealPlate ColorTab(TM) Films minimize evaporation, prevent spillage and contamination between wells, and provide secure seal for ELISA, EIA, and similar assays. Films include color dot and white writing area on each end tab for plate ID labeling. End tabs with backing removed adhere to ends of plate and are perforated so they can be left in place...
Read More »
Reagent Reservoirs are suited for liquid handling systems.
Chemical- and heat-resistant Deep Well and Low Profile Reservoirs have pyramid bottoms that reduce reagent waste by providing collection area for low dead volume. Offered in 96- and 384-well filling formats, as well as with 6, 8, 12, and 16 partitioned channels, polypropylene reservoirs meet ASTM/SBS industry standard footprint and comply with standards for automation. Stackable, autoclavable...
Read More »
Evaporator works with 96- and 384-well plates.
Designed to facilitate dry down of 96- and 384-well microplates, ZipVap features adjustable needle height, ability to hold standard microplates or deep well plates, and flow control adjusted with fine needle valve. Heated holder can be removed for room temperature operation. Compatible with TFA, DMSO, and standard solvents, product is available in Nylon, with max temperature of 100Ã-
Read More »
Glass Tapered Inserts suit high-throughput systems.
With push-point design that provides sample access down to 10 Ã-µL, 0.7 and 1.0 mL Glass Tapered Inserts are available assembled in 96-Square Deep Well Polypropylene Microplates. Inserts and plate can be autoclaved, offer thermal stability and chemical resistance, and can be used with shakers and vortexers. Microplates assembled with 0.7 mL or 1.0 mL inserts can be sealed with respective...
Read More »Sealing Film suits needs of bio-analytical environments.
Sterile and non-sterile 96-Well Pattern Sealing Film has no adhesive around wells to prevent tacky/sticky adhesive from adhering to plastic pipette tips or metal probes. Employing solvent-free adhesive, sealing film is available in 2 or 5 mil thick Teflon, which is compatible with aqueous solutions and organic solvents and is pierceable with single/multichannel pipettors and robotic probes....
Read More »
Microplate Liners reseal after multiple injections.
Molded PTFE/Silicone and Silicone Only Liners fit round or square 96-well microplates. Liners have 96 plugs that lock into each cylindrical or tapered well. Tight seal eliminates sample cross contamination and reduces chance of sample evaporation. PTFE/Silicone Liners offer chemical compatibility and are made from TeflonÃ-®-lined, medical-grade silicone. Dark Blue Silicone Liners withstand...
Read More »