Nordson Sealant Equipment
Wixom, MI 48393
Hand-Held Fluid Valves optimize dispensing ergonomics.
Vertical handle mounted 1270-857 Kiss(TM) Dispense Valves are suited for dispensing low- to high-viscosity 1-component adhesives, sealants, and lubricants including polyurethane, silicone, heat cure mastics, PVCs, and grease. Manual assembly consists of Kiss fluid dispense valve, 4-way pneumatic valve to start and stop fluid flow, mounting bracket for attaching to tool balance, and low-force...
Read More »New Design of Material Dispense Valves Improves Performance
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s re-design of its 2200-Series mid-size dispense valves improves dispensing and operating performance for the user. The new design of these one-piece body valves includes the No-Drip-®, Snuf-Bak(TM) and Tip-Seal-® fluid-dispense-valve product families. Two new design features of the 2200-Series valves are a new needle for fluid-flow control...
Read More »
Material Dispense Valve delivers precise beads.
Designed for precision dispensing of low- to high-viscosity flowables, Tip-Seal-® Model 2200-245-051 employs zero-cavity design for handling solvent-based, moisture-curing, and stringy materials. Sealing at tip prevents material from hardening in nozzle, oozing, or dripping. Pneumatically actuated valve has carbide tip, titanium-coated shaft, hardened seat, and wear-resistant fluid seals. Stroke...
Read More »
Flow-Control Valve works in fluid dispensing systems.
With No-Drip-® carbide ball-end needle and hardened seat, 2200-087 Series starts or stops flow of pressure-fed materials. It handles low- to high-viscosity and abrasive materials and is suited for material-delivery systems. Featuring -¾ in. NPT inlet and outlet ports, all-pneumatic, double-acting valve aids in pump and meter-system inlet and outlet fluid-flow management. It is rated for 4,000...
Read More »
Metering Valve dispenses small, precise shots.
Positive-displacement Series 2600-003 dispenses repeatable shots of low- to high-viscosity adhesives, sealants, and lubricants. Featuring pneumatic, double-acting design, unit may be mounted to fixed or movable tooling and activated by automation, hand, or footswitch actuator. It includes hardened internal components and wear-resistant seals. Shot volumes are manually adjustable from 0.015-2.0...
Read More »
Dispense Valve delivers precise beads and exact shots.
Pneumatically actuated, Tip-Seal-® Model 2600-035 dispenses medium- to high-viscosity adhesives and sealants. It opens and closes material passage at tip of nozzle to precisely start and stop material flow, eliminating oozing and dripping. Material is delivered to valve by metering assembly or under regulated pressure from supply tanks or pumps. Suited for materials that air dry or cure, valve...
Read More »
Meter/Mix/Dispense System suits low-med viscosity materials.
Servomotor-driven Servo-Flo-® 704 provides automated and manual dispensing of 2-component adhesives and sealants. Dispense rate can be altered during dispense process to provide variety of bead profile sizes and material flow rates. Continuous-flow design eliminates need for reload cycle and facilitates lengthy beads and large shot volumes. Positive-displacement, gear-pump metering system is...
Read More »
Dispenser creates circular patterns and continuous beads.
Program-A-Swirl(R) maximizes adhesion between 2 substrates, using less material to wet-out greater area. Swirling is achieved when servo motor spins dispenser's nozzle. System can dispense single-component materials, or it can be used with static mixer nozzle for 2-component, reactive-resin materials. It is typically mounted at end-of-arm tool in robotic applications, or fixture-mounted in...
Read More »
Dispensing System suits potting/encapsulation applications.
Air-powered See-Flo(R) 387 table-top meter/mix/dispense system is designed to dispense 2-component materials. Suitable for low-viscosity silicone, urethane, or epoxy, system permits dispensing as metered shot or controlled bead. Its positive displacement meter mixes precisely to established ratio. Applications include central fill stations that manually fill syringe style applicators.
Read More »
Dispensing Systems provide small, precise shots.
MicroMeter(TM) systems dispense micro-shots or beads of single- or multiple-component adhesives or sealants ranging in size from 0.01 to 10 cc, depending upon model. Systems are powered by pneumatic or servo drive. Servo systems are suitable for precision beads, while air-powered systems are for shot-dispensing applications. All have power inlet and outlet valves, coupled positive-displacement...
Read More »Awards Earned by ASYMTEK Products for Best New Product and Service Excellence at IPC APEX 2020
ASYMTEK wins its 16th Service Excellence Award Carlsbad, CA, USA - 19 February 2020 - ASYMTEK, a part of Nordson ELECTRONICS SOLUTIONS, a global leader in electronics manufacturing technologies, received two awards at IPC APEX Expo 2020: New Product Introduction (NPI) and Service Excellence. The Qadence™ Closed-Loop Flow Control System earned the NPI award in the Dispensing category. The...
Read More »Nordson ASYMTEK to Present Paper on Dispensing for Chip-on-Wafer Packaging and Poster on Coating Applications for EMI Shielding at IMAPS Device Packaging Conference
Presented March 8 and 9 at WeKoPa Resort & Casino Scottsdale/Fountain Hills, AZ Carlsbad, CA, USA - 02 March 2017 - Nordson ASYMTEK, a Nordson company (NASDAQ: NDSN), a global leader in dispensing, jetting, and coating equipment and technologies, will present a technical paper and poster session at the IMAPS Device Packaging Conference being held at the WeKoPa Resort & Casino in...
Read More »
Hand-Held Fluid Valves optimize dispensing ergonomics.
Vertical handle mounted 1270-857 Kiss(TM) Dispense Valves are suited for dispensing low- to high-viscosity 1-component adhesives, sealants, and lubricants including polyurethane, silicone, heat cure mastics, PVCs, and grease. Manual assembly consists of Kiss fluid dispense valve, 4-way pneumatic valve to start and stop fluid flow, mounting bracket for attaching to tool balance, and low-force...
Read More »Fred Krautz Joins Sealant Equipment & Engineering
PLYMOUTH, MI - Fred Krautz has joined Sealant Equipment & Engineering as Western Region Account Manager covering the 11 western United States. Fred has over 15 years of extensive industry experience with meter mix and dispense equipment as an Area Sales Manager for the 11 Western States including time spent in Product Development and Marketing. He has provided technical sales and service support...
Read More »Kenneth A. Jacobs Joins Sealant Equipment & Engineering
October 1, 2008 PLYMOUTH, MI - Kenneth A. Jacobs has joined Sealant Equipment & Engineering as Vice President of Global Sales and Marketing. Mr. Jacobs has over 30 years of experience in the Meter Mix and Dispense industry. He recently was President of TAH Industries in Robbinsville, NJ and held various management positions over 26 years including Vice President of Sales, Executive VP and...
Read More »Sealant Equipment & Engineering, Inc. Introduces Its New Brochure, Material Dispense Valves for Adhesives, Sealants and Lubricants
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s new catalog Material Dispense Valves for applying Adhesives, Sealants and Lubricants is now available for free distribution. The new 12-page brochure, its 40th year edition, can be viewed and downloaded on the company's website at www.SealantEquipment.com/catalog/mat-dispense.htm. A free print copy of the brochure can be ordered at...
Read More »Sealant Equipment & Engineering, Inc. Introduces Its New Brochure, Meter Mix Dispense Systems for Adhesives, Sealants and Lubricants
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s new product brochure, Meter Mix Dispense Systems for Adhesives, Sealants and Lubricants is now available by mail and on the company's website at SealantEquipment.com/catalog. The new brochure, its 40th year edition, has been expanded to six product sections: Principles of Meter Design, 2-part Meter-Mix Dispensing Systems; 1-part Dispensing...
Read More »New Design of Material Dispense Valves Improves Performance
PLYMOUTH, MI -- Sealant Equipment & Engineering, Inc.'s re-design of its 2200-Series mid-size dispense valves improves dispensing and operating performance for the user. The new design of these one-piece body valves includes the No-Drip-®, Snuf-Bak(TM) and Tip-Seal-® fluid-dispense-valve product families. Two new design features of the 2200-Series valves are a new needle for fluid-flow control...
Read More »
Material Dispense Valve delivers precise beads.
Designed for precision dispensing of low- to high-viscosity flowables, Tip-Seal-® Model 2200-245-051 employs zero-cavity design for handling solvent-based, moisture-curing, and stringy materials. Sealing at tip prevents material from hardening in nozzle, oozing, or dripping. Pneumatically actuated valve has carbide tip, titanium-coated shaft, hardened seat, and wear-resistant fluid seals. Stroke...
Read More »
Flow-Control Valve works in fluid dispensing systems.
With No-Drip-® carbide ball-end needle and hardened seat, 2200-087 Series starts or stops flow of pressure-fed materials. It handles low- to high-viscosity and abrasive materials and is suited for material-delivery systems. Featuring -¾ in. NPT inlet and outlet ports, all-pneumatic, double-acting valve aids in pump and meter-system inlet and outlet fluid-flow management. It is rated for 4,000...
Read More »