Nordson Sealant Equipment
Wixom, MI 48393
Dispense Valve delivers precise beads and exact shots.
Pneumatically actuated, Tip-SealÃ-® Model 2600-035 dispenses medium- to high-viscosity adhesives and sealants. It opens and closes material passage at tip of nozzle to precisely start and stop material flow, eliminating oozing and dripping. Material is delivered to valve by metering assembly or under regulated pressure from supply tanks or pumps. Suited for materials that air dry or cure,...
Read More »
Meter/Mix/Dispense System suits low-med viscosity materials.
Servomotor-driven Servo-FloÃ-® 704 provides automated and manual dispensing of 2-component adhesives and sealants. Dispense rate can be altered during dispense process to provide variety of bead profile sizes and material flow rates. Continuous-flow design eliminates need for reload cycle and facilitates lengthy beads and large shot volumes. Positive-displacement, gear-pump metering system is...
Read More »
Applicator facilitates robotic fluid dispensing.
Servo-Ribbon Applicator combines AC servo-motor and fluid-dispense valve to robotically position valve's tip at correct angle to deliver ribbon-shaped material pattern. Valve is suited for fixed, automated, or robotic fluid-dispensing applications with shaped-orifice fluid nozzles such as slotted ribbon tip, fan-spray tip, or side-outlet extruded-bead tip. It dispenses PVC sealers, epoxies,...
Read More »
Dispensing System administers patterns and beads.
Program-A-SwirlÃ-® dispenses adhesives or sealants in circular swirling pattern or continuous bead. Swirling is achieved by oscillating nozzle assembly, creating concentric circular pattern. Assembly self-centers its action, allowing tool to alternate on-the-fly between dispensing swirl pattern and consistent bead path. System can be used with standard nozzle for single-component materials or...
Read More »
Spray Valve enables precise nozzle orientation.
Model 2200-245-130 Kiss(TM) No-DripÃ-® Airless Flat Spray Valve delivers repeatable patterns of sprayable sealants, adhesives, and lubricants. It incorporates mounting flats on seat housing assembly and utilizes flat-sided spray tips that can be installed in only one direction. Carbide ball-and-seat combination offers abrasion resistance, and dowel-pin locating holes provide repeatable valve...
Read More »
Dispense System produces large or small volumetric shots.
Air-powered Shot-A-MaticÃ-® can be operated manually or integrated into automated or robotic applications. It measures and dispenses required amount of single- or plural-component materials such as grease, silicone, and epoxy. System includes volume adjustments that are locked in after set and can dispense less than 1 cc to several hundred cc's. Adjustable hard-stop shot controls and clean...
Read More »
Meter/Mix System suits potting and bonding applications.
Benchtop See-FloÃ-® 387 dispenses shots of 2-component epoxy, silicone, or urethane materials for potting, encapsulating, and bonding applications. Fixed-ratio, air-powered system includes positive-displacement meter with AirDraulic(TM) drive; 2 one-gallon, stainless steel material-holding tanks; foot-pedal actuator; and dispense-valve assembly with No-Flush(TM) mixers. Shot size of mixed...
Read More »
Dispense Valves precisely dispense fine beads.
Micro-Kiss(TM) 2200-555 valves dispense single-component adhesives, sealants, or lubricants. They are available with threaded material and air inlet to operate as single unit, or with manifolded material and air inlets for dispensing multiple beads at same time. Double-air-operated valves include hardened internal components and divorced air and fluid design. No-Drip(TM) shut-off and flow rate...
Read More »
Meter/Mix System dispenses small, precise beads.
Servo-driven MicroMeter(TM) III dispenses micro-beads of 2-component reactive resins ranging from .02-3 cc's depending upon ratio. User can vary dispense flow rate with 0-10 Vdc signal to servo controller, which is interfaced with automation. System components are remote mounted since many applications use small XYZ table. Only dispense valve is fixtured over part.
Read More »
In-line Filter Assembly makes adhesives/sealants lump-free.
Able to remove lumps and particulates from adhesives and sealants, 1270-Series Material Filter ensures delivery of free-flowing, homogeneous material to dispense valve. Material filter also provides control of material pressure and flow rate. Rounded, internal design prevents material from becoming packed in corners and also prevents clogged material lines. Offered in 2 filter sizes, product has...
Read More »