CRC Industries, Inc.

Cleaning Products & Equipment

Degreaser offers industrial strength with low VOCs.

T-Force(TM) Degreaser is nonconductive, noncorrosive, and nonstaining and has no flash or fire point. It contains no Class I or Class II ozone depleting chemicals and dissolves grease, oil, and sludge from air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators, and compressors. With dielectric strength of 33,300 V, it leaves no residue and is...

Read More »
General Purpose Cleaner is non-corrosive and biodegradable.
Cleaning Products & Equipment

General Purpose Cleaner is non-corrosive and biodegradable.

HydroForce® Zero VOC General Purpose Cleaner consists of industrial-strength, aqueous, non-aerosol cleaner best used for applications that will not allow butyl. It can be used full strength or diluted with water in pressure washers. Containing no phosphates, ammonia, or bleach, product is non-flammable, non-ozone depleting, and safe on most plastics. It is NSF A1 registered for use in...

Read More »
Silicone Lubricant gets in hard-to-reach areas.
Lubricants

Silicone Lubricant gets in hard-to-reach areas.

Formulated from blend of silicones, cross linkers, and oils, Chute Lube(TM) lubricates package handling equipment, food processing equipment, chutes, guides, and rail conveyors. Colorless, odorless product will not stain or cause packages to become greasy and is harmless to most rubbers and plastics. Available in 20 oz aerosol cans, Chute Lube(TM) is effective in wide range of temperatures and is...

Read More »
Cleaning Products & Equipment

Foam Cleaner contains no ozone depleting chemicals.

Germicidal Foam cleans, disinfects, and deodorizes with aqueous based formula that clings to vertical surfaces without runs or drips. Product controls mold and mildew and is effective against Staph, Salmonella, and other bacteria. Product has low VOC content and is NSF C1 registered for use in meat and poultry plants. Cleaner is biodegradable, non-abrasive, non-flammable, and leaves no sticky...

Read More »
Adhesives & Sealants

Epoxy Putty is packaged in a one piece stick.

MinuteMend(TM) 2-part epoxy putty bonds to wet and dry surfaces, and once dry, can be tapped, sawed, drilled, machined, stained, or painted. Product mixes in the hand and hardens in minutes. It is USDA approved for use in meat and poultry plants, contains no solvents, and will not shrink. Putty permanently repairs scratches, gouges, and holes and stops leaks. Available in 2 and 4-oz sticks.

Read More »
Cleaning Products & Equipment

Cleaner/Degreaser matches solvent-based cleaner performance.

HydroForce® Super Citrus(TM) water-dilutable, d-Limonene based product is completely biodegradable and environmentally safe. Heavy-duty cleaner/degreaser has citrus scent, wipes off easily, and leaves no residue. Suited for difficult cleaning jobs in industrial/commercial environments, non-corrosive, non-abrasive cleaner dissolves and removes grease, oil, ink, grime, and adhesives from...

Read More »
Precision Cleaner evaporates without leaving residue.

Precision Cleaner evaporates without leaving residue.

Electronic Degreaser utilizes COzol(TM) technology. Non-chlorinated, non-conductive, non-corrosive, and non-staining, product has no flash point, and is offered as alternative to HCFC 141b and traditional chlorinate products such as perc and TCE. CO2 propellant means no condensation residue. It is available in 16 oz aerosol containers as well as 1 gal bottles, 5 gal pails, and 55 gal drums.

Read More »
Cleaner removes contaminants from electronic equipment.
Cleaning Products & Equipment

Cleaner removes contaminants from electronic equipment.

NT(TM) Precision Cleaner is a moderately aggressive COzol(TM) technology alternative to HCFC 141b-based cleaners. It evaporates quickly, leaves no residue, is non-flammable, and is NSF registered for use in meat and poultry plants. Formula also complies with EPA regulations on use of CFCs and HCFCs. It contains no Class I or Class II Ozone Depleting Chemicals. All 16 oz aerosol products feature...

Read More »
Cutting Fluids suit specific metal demands.
Electrical Equipment & Systems

Cutting Fluids suit specific metal demands.

Honey-like TrueTap(TM) HD, for severe applications, clings to cutting tools. TrueTap(TM) Foamy aerosol foams on contact with cutting tool, penetrating deep into cut. TrueTap(TM) LV, for re-circulating coolant pumps, floats on surface for skimming. Biodegradable TrueTap(TM) NTL is non-irritating to eyes, skin, and respiratory tract. Water-soluble TrueTap(TM) Aqua replaces solvent or oil-based...

Read More »

All Topics