CONTA-CLIP, Inc.
Somerset, NJ 08873
New Tool-less System Offers Various Option for IP66 Cable Entry
KDS-R system for M20 to M63 round openings suited to cables with and without plugs. Consists of actual cable entry frame with an integrated gasket, a two-piece thread and locking adapter plus two-piece locknut and sealing elements with a range of inlays. Assembly is tool-less, fast and stress-free.
Read More »
New GSM-PRO2 Series Communication Modules Offer Front-access Terminals for Connection
Operates in slave mode and can provide a PLC with added GSM functionality via plug connection. Programmed to send a text or email fault message to specified recipients when the status of the PLC input changes. Firmware updates and online configuration changes can be carried out at any time via the GSM network.
Read More »
New Push-in Terminal Series PRK Ensures Tool Free Insertion of Rigid Wires
Equipped with a pusher that requires only slight pressure and no special tools. Internal layout with large contact surfaces and fixed metal parts ensures high current-carrying capacity with low heat build-up and mechanical toughness. Insulating materials used in the series are free of harmful substances.
Read More »
New KDSClick Allows Feeding Open-Ended Cables and Pre-Assembled Cables into Enclosures
Based on three basic components: frames, inlays and seals. Features one-piece plastic frame in four sizes for 4, 6, 8 or 10 seals. Ensures DIN EN 62444 compliant strain relief for cables.
Read More »
New Screw-Type Distributor Blocks are Designed for Energy Distribution in Control Cabinets
CONTA-CLIP's new screw-type distributor blocks for energy distribution in control cabinets are available in SVBA and the SVBKA series models. SVBA blocks have five versions of currents between 85 A and 415 A and are designed for wire cross sections of 1.5 mm² up to 500 mm². SVBA blocks are rated to voltages of 1000 V AC and up to 1500 V DC and come with built-in label for indicating...
Read More »
Conta-Clip's New KDS-FP Flange Plate Offers IP66 Ingress Protection
Conta-Clip’s KDS-FP Flange Plate are available in KDS-FP-2x10/24 and KDS-FP-3 x 10/24 models with up to 20 or 30 configurable frame openings respectively. Consisting of 40 x 110 mm duct that is segmented into up to ten frame openings by snapping frame inlays, the inlays are offered in plain partitions, T-pieces or cross and double cross form.
Read More »
KES Series Cable Entry System features polyamide frames.
KES Series Cable Entry Systems are available in 24 variants for use in harsh environments. Units feature rounded corners, conical entry grommets and punctured membrane. These entry systems come in with low-profile height of 14 mm and can be fixed with screws into 36 mm x 112 mm openings. Units are suitable for food industry and pharmaceutical production and accommodates up to 32 cables per plate.
Read More »
High-Power Stud Terminals accept small cable diameters.
Ensuring secure connections for all energy-transmitting applications, HSKG 35 and HSKG 70 Terminals connect cables with small rated cross sections of 35 and 70 mmÂ-², respectively. HSKG terminals can be installed as required on standard TS 35 DIN rails in accordance with EN 60715. Units are suited for rated currents from 125–520 A at rated voltages up to 1,000 V. Depending on wire...
Read More »Relay Couplers and Timing Elays save space, installation effort.
At 6.2 mm wide, relay couplers and multifunction timing relays of Interface Relay Compact (IRC) program facilitate installation. Interchangeable relays or optocouplers allow units to be adapted to requirements,Â- while differently colored cross-connection combs ensure clear layout. There are 5 types of products available: basic IRC relay coupler, IRCP model with optional...
Read More »Terminal Blocks cover large wire cross sections.
Manufactured from PA 6.6-V0, SRK Series Feed-Through Terminals are available for wire cross sections from 16 –120 mmÂ-², covering total range of 0.08–120 mm². Up until 35 mm², terminals feature double cross-connection channel for plug-in cross-connectors. Ground terminal blocks have also been extended by wire cross sections from 16–70 mm². Models up to 35...
Read More »
New Tool-less System Offers Various Option for IP66 Cable Entry
KDS-R system for M20 to M63 round openings suited to cables with and without plugs. Consists of actual cable entry frame with an integrated gasket, a two-piece thread and locking adapter plus two-piece locknut and sealing elements with a range of inlays. Assembly is tool-less, fast and stress-free.
Read More »
New GSM-PRO2 Series Communication Modules Offer Front-access Terminals for Connection
Operates in slave mode and can provide a PLC with added GSM functionality via plug connection. Programmed to send a text or email fault message to specified recipients when the status of the PLC input changes. Firmware updates and online configuration changes can be carried out at any time via the GSM network.
Read More »
New Push-in Terminal Series PRK Ensures Tool Free Insertion of Rigid Wires
Equipped with a pusher that requires only slight pressure and no special tools. Internal layout with large contact surfaces and fixed metal parts ensures high current-carrying capacity with low heat build-up and mechanical toughness. Insulating materials used in the series are free of harmful substances.
Read More »
New KDSClick Allows Feeding Open-Ended Cables and Pre-Assembled Cables into Enclosures
Based on three basic components: frames, inlays and seals. Features one-piece plastic frame in four sizes for 4, 6, 8 or 10 seals. Ensures DIN EN 62444 compliant strain relief for cables.
Read More »
New Screw-Type Distributor Blocks are Designed for Energy Distribution in Control Cabinets
CONTA-CLIP's new screw-type distributor blocks for energy distribution in control cabinets are available in SVBA and the SVBKA series models. SVBA blocks have five versions of currents between 85 A and 415 A and are designed for wire cross sections of 1.5 mm² up to 500 mm². SVBA blocks are rated to voltages of 1000 V AC and up to 1500 V DC and come with built-in label for indicating...
Read More »
Conta-Clip's New KDS-FP Flange Plate Offers IP66 Ingress Protection
Conta-Clip’s KDS-FP Flange Plate are available in KDS-FP-2x10/24 and KDS-FP-3 x 10/24 models with up to 20 or 30 configurable frame openings respectively. Consisting of 40 x 110 mm duct that is segmented into up to ten frame openings by snapping frame inlays, the inlays are offered in plain partitions, T-pieces or cross and double cross form.
Read More »
KES Series Cable Entry System features polyamide frames.
KES Series Cable Entry Systems are available in 24 variants for use in harsh environments. Units feature rounded corners, conical entry grommets and punctured membrane. These entry systems come in with low-profile height of 14 mm and can be fixed with screws into 36 mm x 112 mm openings. Units are suitable for food industry and pharmaceutical production and accommodates up to 32 cables per plate.
Read More »
High-Power Stud Terminals accept small cable diameters.
Ensuring secure connections for all energy-transmitting applications, HSKG 35 and HSKG 70 Terminals connect cables with small rated cross sections of 35 and 70 mmÂ-², respectively. HSKG terminals can be installed as required on standard TS 35 DIN rails in accordance with EN 60715. Units are suited for rated currents from 125–520 A at rated voltages up to 1,000 V. Depending on wire...
Read More »Relay Couplers and Timing Elays save space, installation effort.
At 6.2 mm wide, relay couplers and multifunction timing relays of Interface Relay Compact (IRC) program facilitate installation. Interchangeable relays or optocouplers allow units to be adapted to requirements,Â- while differently colored cross-connection combs ensure clear layout. There are 5 types of products available: basic IRC relay coupler, IRCP model with optional...
Read More »Terminal Blocks cover large wire cross sections.
Manufactured from PA 6.6-V0, SRK Series Feed-Through Terminals are available for wire cross sections from 16 –120 mmÂ-², covering total range of 0.08–120 mm². Up until 35 mm², terminals feature double cross-connection channel for plug-in cross-connectors. Ground terminal blocks have also been extended by wire cross sections from 16–70 mm². Models up to 35...
Read More »
