Techno Linear Motion Systems
New Hyde Park, NY 11042
Share:
CAN Controller expands automation possibilities.
Compatible with gantry tables, linear slides, belt drive actuators, and rotary tables, 1-6 axis Model iMC-V is housed in desktop enclosure with drives, power supply, I/O, onboard computer, and 10 in. touch screen. Controller features 16 digital inputs and 8 digital outputs, which can be expanded up to 128 points of I/O through CAN bus. Able to perform linear, circular, and helical interpolation,...
Read More »
Servo Controller suits single-axis automation projects.
Supplied fully assembled with I/O capability and USB ports, Phoenix I combines servo controller, drive, power supply, enclosure, wiring, cabling, and software. System controls single belt slide, ball screw slide, or rotary table with servomotor. Jog buttons on front allow for manual positioning without PC being connected. Equipped with 2-line LCD display, controller features 6 A of continuous...
Read More »
Positioning Stages are available with several motor options.
Offered in stroke lengths from 4.8-107.2 in., narrow-profile NP2 Series consists of 16 motorized positioning stages that can reach speeds to 24 ips and precision guide rail system. They can be supplied with no motor, 150 oz-in. stepper motor, or 120 W servo motor; stages without steppers or servos can readily accept NEMA 23 frame motors. Available precision ball screw drive system is offered with...
Read More »
Timing Belt Drives features speeds up to 5 m/s.
Available in various motor and carriage configurations, Blue Line 1, Blue Line 3, ZF 1, ZF 2, and ZF 3 Series Slides suit wide variety of automation applications. All use HTD timing belt, have home position switches accurate to less than 0.1 mm, and repeatability of travel less than 0.2 mm. Timing belt features deep curvilinear profile for positive non-slip operation, compared with conventional...
Read More »
Double Rail System features wide support profile.
Offering linear motion for variety of positioning applications, Series 300 features 2 hardened steel shafts spaced 50 mm apart, resulting in torsional stability and providing max linear speed of 10 m/s. Guide rails are available in 16 lengths, ranging from 400-3,000 mm, and can be extended to provide virtually any length of travel by staggering steel rails on base plates.
Read More »
Servo Controller System suits automation applications.
Featuring NEMA 1 rated enclosure, LP Series control package includes PCI motion controller card, power amplifiers, and power supply. Smooth, continuous, 2D or 3D motion eliminates puddling when dispensing fluids or working with solder. Also included, SAC Motion Control software enables basic motion function programming. Additional features include 16 digital inputs and 8 digital outputs, 2 dc...
Read More »
Linear Double Rail System has enclosed aluminum housing.
With max speed of 5 m/sec, 500 Series consist of 2 sets of double precision ground, 12 mm dia, Cf53 steel shafts hardened to RC 62 that accommodate roller and bearing carriages. Shafts are pulled together by support blocks, ensuring that they are parallel to less than 0.02 mm/1 m for precision motion in load positioning applications. Available in 16 sizes from 400-3,000 mm, products have middle...
Read More »
Linear Double Rail System delivers precision motion.
Designed for load positioning applications, 400 Series features enclosed aluminum housing and max speed of 5 m/sec. Rails consist of double precision ground, 12 mm diameter, Cf53 steel shafts hardened to RC 62 Ã-
Read More »
Motorized Positioning Stages have enclosed motor assembly.
Featuring single rigid aluminum extrusion profile, HD2 Series Slides are available with stroke lengths from 4.8-107.2 in. and either 150 oz-in. stepper motor, 120 W servo motor, or no motor at all. Each unit has 4 precision ground, 12 mm dia steel rails with 2 or 4 single-piece steel bearing blocks, all hardened to HRC 62 Ã-
Read More »
Metric Ball Screws have an anti-backlash design.
Precision rolled ball screws, matched with low-profile, anti-backlash ball nuts, are suited for linear motion applications. Screws are available with machined or unmachined ends in lengths up to 3 m, and 16 and 25 mm dia screws are available with leads of 2.5, 5, 10, and 20 mm. Suited for use where spoace is premium, standard lengths of 16 mm dia screws come with machined ends ready to be placed...
Read More »
CAN Controller expands automation possibilities.
Compatible with gantry tables, linear slides, belt drive actuators, and rotary tables, 1-6 axis Model iMC-V is housed in desktop enclosure with drives, power supply, I/O, onboard computer, and 10 in. touch screen. Controller features 16 digital inputs and 8 digital outputs, which can be expanded up to 128 points of I/O through CAN bus. Able to perform linear, circular, and helical interpolation,...
Read More »
Servo Controller suits single-axis automation projects.
Supplied fully assembled with I/O capability and USB ports, Phoenix I combines servo controller, drive, power supply, enclosure, wiring, cabling, and software. System controls single belt slide, ball screw slide, or rotary table with servomotor. Jog buttons on front allow for manual positioning without PC being connected. Equipped with 2-line LCD display, controller features 6 A of continuous...
Read More »Expanded Line of Acme and Ball Lead Screws From Techno-Isel Feature Over 950 Components
New Hyde Park, New York - An expanded line of acme & ball lead screws from Techno-Isel features over 950 components, to make it more affordable than ever to design and build linear systems, automated production systems, inspection machinery, or any product that requires linear motion. A highlight of the catalog is a 15-page technical data section covering the selection and sizing of lead and ball...
Read More »
Positioning Stages are available with several motor options.
Offered in stroke lengths from 4.8-107.2 in., narrow-profile NP2 Series consists of 16 motorized positioning stages that can reach speeds to 24 ips and precision guide rail system. They can be supplied with no motor, 150 oz-in. stepper motor, or 120 W servo motor; stages without steppers or servos can readily accept NEMA 23 frame motors. Available precision ball screw drive system is offered with...
Read More »
Servo Controller System suits automation applications.
Featuring NEMA 1 rated enclosure, LP Series control package includes PCI motion controller card, power amplifiers, and power supply. Smooth, continuous, 2D or 3D motion eliminates puddling when dispensing fluids or working with solder. Also included, SAC Motion Control software enables basic motion function programming. Additional features include 16 digital inputs and 8 digital outputs, 2 dc...
Read More »
Timing Belt Drives features speeds up to 5 m/s.
Available in various motor and carriage configurations, Blue Line 1, Blue Line 3, ZF 1, ZF 2, and ZF 3 Series Slides suit wide variety of automation applications. All use HTD timing belt, have home position switches accurate to less than 0.1 mm, and repeatability of travel less than 0.2 mm. Timing belt features deep curvilinear profile for positive non-slip operation, compared with conventional...
Read More »
Double Rail System features wide support profile.
Offering linear motion for variety of positioning applications, Series 300 features 2 hardened steel shafts spaced 50 mm apart, resulting in torsional stability and providing max linear speed of 10 m/s. Guide rails are available in 16 lengths, ranging from 400-3,000 mm, and can be extended to provide virtually any length of travel by staggering steel rails on base plates.
Read More »
Linear Double Rail System has enclosed aluminum housing.
With max speed of 5 m/sec, 500 Series consist of 2 sets of double precision ground, 12 mm dia, Cf53 steel shafts hardened to RC 62 that accommodate roller and bearing carriages. Shafts are pulled together by support blocks, ensuring that they are parallel to less than 0.02 mm/1 m for precision motion in load positioning applications. Available in 16 sizes from 400-3,000 mm, products have middle...
Read More »
Linear Double Rail System delivers precision motion.
Designed for load positioning applications, 400 Series features enclosed aluminum housing and max speed of 5 m/sec. Rails consist of double precision ground, 12 mm diameter, Cf53 steel shafts hardened to RC 62 Ã-
Read More »
Motorized Positioning Stages have enclosed motor assembly.
Featuring single rigid aluminum extrusion profile, HD2 Series Slides are available with stroke lengths from 4.8-107.2 in. and either 150 oz-in. stepper motor, 120 W servo motor, or no motor at all. Each unit has 4 precision ground, 12 mm dia steel rails with 2 or 4 single-piece steel bearing blocks, all hardened to HRC 62 Ã-
Read More »