Wilkerson Instrument Company, Inc

I/O Interface Board complements Motorola RTU I/O module.
Architectural & Civil Engineering Products

I/O Interface Board complements Motorola RTU I/O module.

Expanding capabilities of Motorola ACE3600 RTU Mixed I/O Module, Model SIB-V245/V453 Mixed I/O Interface Board provides 16 discrete inputs which can be separately set to monitor 10–30 Vac/Vdc or 120 Vac; 4 discrete outputs as Form C pluggable relays; and 4 bipolar analog inputs, which provide test points that allow monitoring of 4 current signal inputs without breaking current loop. Transient...

Read More »
Wireless DAQ System offers Modbus RTU data output.
Computer Hardware & Peripherals

Wireless DAQ System offers Modbus RTU data output.

Acting as standard DAQ device or repeater, DR9051R wireless transmitter provides analog and contact closure data to DR9050 controller. Latter acts as portal between Modbus Master Controller and from 1-247 remote transmitters. It outputs standard Modbus RTU data via RS485/422 data port and can be wired in parallel with other Modbus products. Combined DR9050/DR9051R system offers choice of 3 radio...

Read More »
Computer Hardware & Peripherals

Wireless DAQ System function over 20 mile range.

System provides analog and contact inputs with analog and discrete outputs for point to point data acquisition. Wireless transmitter (DR9011) sends analog and contact closure data to companion DR9021, where it is recovered as two 4-20 mA outputs, and switch data is provided by optically isolated NPN transistors outputs. RF choices - 2 in 915 MHz ISM band and 1 in 2.4 GHz band - all use spread...

Read More »
Computer Hardware & Peripherals

Analog and Switch DAQ Products use Modbus RTU protocol.

Control unit, DR9050, interfaces to Modbus RTU RS485 network and allows user's Modbus® Controller to access 1-247 remote units (DR9051), which are available with dual 4-20 mA inputs, RTD input, or strain gauge input. Each DR9051 also has 4 discrete inputs for monitoring switch status. RF connection can be 900 MHz or 2.4 GHz, where former provides communications over line of sight distances...

Read More »
Signal Isolator features .48 in. wide DIN rail mount enclosure.
Agricultural & Farming Products

Signal Isolator features .48 in. wide DIN rail mount enclosure.

Model DR4300 isolated signal conditioner can be supplied with inputs from ±50 mV to ±256 Vdc or ±0/1 mA to ±200 mA. Outputs can be supplied for 0/1 V, 1/5 V, 0/5 V, -5/5 V, 0/10 V, -10/10 V, 0/1 mA, 0/20 mA, or 4/20 mA. Unit is powered by 21 to 28 Vdc and provides 3-way isolation rated at 1500 Vac, 50/60 Hz. It has plug-in screw terminal blocks, and ZERO and SPAN controls...

Read More »
Indicator can be adjusted from 100 to 1999 counts.
Mining, Oil Drilling, Refining Products & Equipment

Indicator can be adjusted from 100 to 1999 counts.

DIS471B-24 process indicator, available with dc voltage and current inputs to monitor process signals, features auxiliary 24 Vdc (35 mA maximum) power supply for powering external equipment. Digit display has 0.56 in.-high red LED indicators. Indicator mounts through front panel in 1/8 DIN cutout. When properly mounted, it meets NEMA-4 requirements for being liquid-tight. Unit includes selectable...

Read More »
I/O Interface Board complements Motorola RTU I/O module.
Architectural & Civil Engineering Products

I/O Interface Board complements Motorola RTU I/O module.

Expanding capabilities of Motorola ACE3600 RTU Mixed I/O Module, Model SIB-V245/V453 Mixed I/O Interface Board provides 16 discrete inputs which can be separately set to monitor 10–30 Vac/Vdc or 120 Vac; 4 discrete outputs as Form C pluggable relays; and 4 bipolar analog inputs, which provide test points that allow monitoring of 4 current signal inputs without breaking current loop. Transient...

Read More »
Wireless DAQ System offers Modbus RTU data output.
Computer Hardware & Peripherals

Wireless DAQ System offers Modbus RTU data output.

Acting as standard DAQ device or repeater, DR9051R wireless transmitter provides analog and contact closure data to DR9050 controller. Latter acts as portal between Modbus Master Controller and from 1-247 remote transmitters. It outputs standard Modbus RTU data via RS485/422 data port and can be wired in parallel with other Modbus products. Combined DR9050/DR9051R system offers choice of 3 radio...

Read More »
Computer Hardware & Peripherals

Wireless DAQ System function over 20 mile range.

System provides analog and contact inputs with analog and discrete outputs for point to point data acquisition. Wireless transmitter (DR9011) sends analog and contact closure data to companion DR9021, where it is recovered as two 4-20 mA outputs, and switch data is provided by optically isolated NPN transistors outputs. RF choices - 2 in 915 MHz ISM band and 1 in 2.4 GHz band - all use spread...

Read More »
Computer Hardware & Peripherals

Analog and Switch DAQ Products use Modbus RTU protocol.

Control unit, DR9050, interfaces to Modbus RTU RS485 network and allows user's Modbus® Controller to access 1-247 remote units (DR9051), which are available with dual 4-20 mA inputs, RTD input, or strain gauge input. Each DR9051 also has 4 discrete inputs for monitoring switch status. RF connection can be 900 MHz or 2.4 GHz, where former provides communications over line of sight distances...

Read More »
Signal Isolator features .48 in. wide DIN rail mount enclosure.
Agricultural & Farming Products

Signal Isolator features .48 in. wide DIN rail mount enclosure.

Model DR4300 isolated signal conditioner can be supplied with inputs from ±50 mV to ±256 Vdc or ±0/1 mA to ±200 mA. Outputs can be supplied for 0/1 V, 1/5 V, 0/5 V, -5/5 V, 0/10 V, -10/10 V, 0/1 mA, 0/20 mA, or 4/20 mA. Unit is powered by 21 to 28 Vdc and provides 3-way isolation rated at 1500 Vac, 50/60 Hz. It has plug-in screw terminal blocks, and ZERO and SPAN controls...

Read More »
Indicator can be adjusted from 100 to 1999 counts.
Mining, Oil Drilling, Refining Products & Equipment

Indicator can be adjusted from 100 to 1999 counts.

DIS471B-24 process indicator, available with dc voltage and current inputs to monitor process signals, features auxiliary 24 Vdc (35 mA maximum) power supply for powering external equipment. Digit display has 0.56 in.-high red LED indicators. Indicator mounts through front panel in 1/8 DIN cutout. When properly mounted, it meets NEMA-4 requirements for being liquid-tight. Unit includes selectable...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers