Wilks - A Spectro Scientific Company
Suite 101
Chelmsford, MA 01824-2563
Filter-Based IR Analyzers meet fuel blending environment needs.
InfraCal Biodiesel Blend Analyzer reads out directly in percent biodiesel and can measure blend ratio on-site in 30 sec. This specific-analysis fixed-filter IR analyzer has- 0%–100%- measurement range- and -
Read More »Portable IR Analyzer measures oil in water down to 0.1 ppm.
Capable of taking onsite measurements in under 15 min, InfraCal 2 combines optimized electronics, which maximize signal-to-noise ratio, with touchscreen intuitive display that allows for multiple calibrations, internal data logging, alarm functions, security/password protection, and data transfer.- Battery-powered analyzer is housed in rugged package with no moving parts, and is available for...
Read More »Portable IR Analyzers provide on-site measurements.
With rugged package weighs less than 6 lb and no moving parts, InfraCal 2 provides sensitivity and detection limits for various on-site measurements. These include sub-ppm detection levels of oil in water, cleaning efficiency of metal parts, barrier layers in flexible films, textile, and fiber finishes, and QC measurements. Touchscreen display is standard, and measurements typically take 1–10...
Read More »
Portable IR Analyzer measures soot percent in diesel engines oil.
Via field spectroscopic check, InfraCal Soot Meter gives users approved ASTM testing method for measuring percent level of soot in diesel engine lubricating oils per ASTM Method D7686. Portable, filter-based IR analyzer is factory calibrated for measuring soot percent levels up to 12%–15% in under 30 sec without requiring sample preparation, dilution, solvents, or transmission cells. Sealed...
Read More »Comply with Highly Regulated Oil in Water Measurements Using Portable Infrared Analyzers
The Petroleum Industry - both offshore and onshore -- has regulations that limit the amount of oil in discharged water. Fixed filter infrared (IR) analyzers have been used to test oil levels in produced water on drilling platforms for over 45 years for a number of reasons. On oil rigs where real estate is at a premium, infrared analyzers such as the Wilks InfraCal TOG/TPH Analyzers are compact...
Read More »
Portable Infrared Analyzers Help Ensure Compliance with Oil in Water Effluent Discharge Levels
Oil in wastewater discharges are highly regulated and each region of the world has their specific regulations. For the offshore oil industry regulating bodies such as the NPDES (National Pollutant Discharge Elimination System) in the US have strict ppm limits that are coupled with costly fines for non-compliance. On-shore industrial wastewater producers also have limits imposed either by the...
Read More »
Portable IR Analyzers measure fuel blend on-site in under 1 min.
Designed for use by non-technical personnel, InfraCal Blend Analyzers determine percent ethanol in gasoline or biodiesel in diesel to ensure correct fuel blend. Factory-calibrated and self-contained models are available for measuring various ranges from 0.2%-100% and can be operated from battery pack or cigarette lighter adapter cable. Weighing less than 5 lb, analyzers come with internal...
Read More »
Accurately Measure Hydrocarbon (Oil/Grease) Levels in Produced Water in Under 15 Minutes
Determining total hydrocarbon or oil/grease levels to ensure compliance with regulatory permit requirements for discharging produced water is a worldwide problem facing the oil and gas industry. Ensuring compliance with these regulations and avoiding fines for non-compliant discharges requires more frequent wastewater measurements to determine the total hydrocarbon concentration. The portable...
Read More »
Portable Infrared Analyzers Provide On-Site Measurement of Oil and Grease Levels in Hydraulic Fracturing Water
East Norwalk, CT - The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off-site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the water. Waiting for remote laboratory results to determine the oil level can take...
Read More »
On-Site TPH in Soil Measurements in less than 10-15 Minutes with Portable Infrared Analyzers
East Norwalk, CT - On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc. The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, including the extraction. Concentrations as low as 10 ppm to well over...
Read More »