Citel, Inc.
Miramar, FL 33025
Surge Protector Module features gas discharge tube.
Model DS250VG, for single and 3-phase AC power lines, employs hybrid circuit and is tested to withstand 15 impulses at 15 ka 10/350 ms without degradation in clamp voltage. Suppression level at 500 A, 3 kA, and 10 kA 8/20 ms is below MOV-only devices. Unit can be deployed in harsh environments to protect against direct lightning strikes as well as microprocessor/controls applications. It provides...
Read More »
Surge Protectors are UL 1449 2nd edition listed.
SurgeGuard AC surge protection products are designed to protect all ANSI/IEEE locations, telecommunications equipment, and sensitive electronics. They are available up to 600 VAC with surge current ratings up to 280 kA per phase. Units feature NEMA 12 enclosures and power and fault indicators with replaceable modules. Integral disconnect, dry contacts, audible alarm, and weatherproof enclosures...
Read More »Coaxial Surge Protector is suitable for wireless systems.
Model P8AX uses fast-acting gas tubes to provide protection against lightning surges and electrical transients for microwave, radio, antennas, GPS, and satellite and cellular-systems. N, BNC, TNC, SMA and 7/16 connectors are available. Protectors are available for 1 to 1,000 W and any frequency from dc up to 4 Ghz. They can be mouinted on cable assembly, through chassis of equipment to be...
Read More »
Surge Suppressor protects T1 lines.
Models B280 and B480 protect wireless loop equipment against lightning surges and electrical transients. Both use heavy-duty multistages. Small and compact, they can be mounted inside cabinet or on backboard. Models are available for 1 or 2 T1 circuits. I/O connections are made with screw terminals or RJ45 jacks.
Read More »
Gas Tubes are designed for surge arresters.
Models BA and BM are 2-element and 3-element surface mount surge arrester gas tubes that protect telecom/datacom equipment against lightning surges and electrical transients. Both are non-radioactive, half the size of company's conventional gas tubes, and available in surface mount versions. Tubes are available from 90 to 500 V. Prices range from $0.40 to $2.00 each.
Read More »
Surge Protector mounts on DIN rail.
Small and compact Model DS 150E heavy-duty ac power surge protector is suitable for wireless base stations, cellular sites and control/instrumentation equipment. It protects 1-phase 110-120 V and 220-250 V ac networks with 3 layers of MOVs and thermal fuses. Protector has power dissipation capability of 140 kA, comes with visual indicators and remote signaling, and is UL 1449 2nd edition-listed...
Read More »
Surge Protector Module features gas discharge tube.
Model DS250VG, for single and 3-phase AC power lines, employs hybrid circuit and is tested to withstand 15 impulses at 15 ka 10/350 ms without degradation in clamp voltage. Suppression level at 500 A, 3 kA, and 10 kA 8/20 ms is below MOV-only devices. Unit can be deployed in harsh environments to protect against direct lightning strikes as well as microprocessor/controls applications. It provides...
Read More »
Surge Protectors are UL 1449 2nd edition listed.
SurgeGuard AC surge protection products are designed to protect all ANSI/IEEE locations, telecommunications equipment, and sensitive electronics. They are available up to 600 VAC with surge current ratings up to 280 kA per phase. Units feature NEMA 12 enclosures and power and fault indicators with replaceable modules. Integral disconnect, dry contacts, audible alarm, and weatherproof enclosures...
Read More »Coaxial Surge Protector is suitable for wireless systems.
Model P8AX uses fast-acting gas tubes to provide protection against lightning surges and electrical transients for microwave, radio, antennas, GPS, and satellite and cellular-systems. N, BNC, TNC, SMA and 7/16 connectors are available. Protectors are available for 1 to 1,000 W and any frequency from dc up to 4 Ghz. They can be mouinted on cable assembly, through chassis of equipment to be...
Read More »
Surge Suppressor protects T1 lines.
Models B280 and B480 protect wireless loop equipment against lightning surges and electrical transients. Both use heavy-duty multistages. Small and compact, they can be mounted inside cabinet or on backboard. Models are available for 1 or 2 T1 circuits. I/O connections are made with screw terminals or RJ45 jacks.
Read More »
Gas Tubes are designed for surge arresters.
Models BA and BM are 2-element and 3-element surface mount surge arrester gas tubes that protect telecom/datacom equipment against lightning surges and electrical transients. Both are non-radioactive, half the size of company's conventional gas tubes, and available in surface mount versions. Tubes are available from 90 to 500 V. Prices range from $0.40 to $2.00 each.
Read More »
Surge Protector mounts on DIN rail.
Small and compact Model DS 150E heavy-duty ac power surge protector is suitable for wireless base stations, cellular sites and control/instrumentation equipment. It protects 1-phase 110-120 V and 220-250 V ac networks with 3 layers of MOVs and thermal fuses. Protector has power dissipation capability of 140 kA, comes with visual indicators and remote signaling, and is UL 1449 2nd edition-listed...
Read More »