Electro Standards Laboratories
Cranston, RI 02921-3403

New UPS Device Available in Desktop and Board-only Configurations
SCups® utilize Super Capacitors provides low maintenance solution with an high cycle life and without the shelf life concerns of typical battery backup systems. Assists with the fluctuating power of low power remote systems where primary power can be interrupted. Ideal for assistance with backup and peak assist power management for solar power, wind power, medical facilities/hospitals, remote...
Read More »
New Model 7391 DB25 A/B Switch Features Automatic Fallback and RS232 Remote Control
Designed to assist in eliminating network downtime. Allows DB25 interface devices or networks to be connected on ports A and B for switching to either port. Unit is switched manually via front panel pushbutton or from a remote location using RS232 data ASCII commands.
Read More »
New Models 4152, 4152-DIN and 4153 of Media Converters Operate from -40 to +85 degree C
Supports data transfer between RS485/RS422/RS232 copper to ST fiber optic networks. Features ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Model 4152 is encased as a desktop unit, Model 4152-DIN for DIN rail mounting and Model 4153 is available as a board only for embedded applications.
Read More »
New Model 9214 Module Patch Panel Comes with Feedthrough RJ45 Ports
New Model 9214 Module Rack Feedthrough Patch Panel is designed for installing in the Model 9025 Rackmount Chassis along with switch modules and filler panels. The panel features four ports of RJ45 Cat5e RJ45 to RJ45 Cat5e Ports. The unit’s feedthrough connections are engineered to withstand numerous install/remove cycles of Ethernet cables from front side.
Read More »
Intercom Headset Cable Assembly comes with volume control option.
Model 9364-X/Y Intercom Headset Cable Assembly is suitable for TV or media broadcasters, producers and reporter applications. Unit is equipped with phone plug and telex connector. Product is ideal for video/audio applications.
Read More »
Fiber Optic Repeater comes with an external wall mount power supply.
Used for regenerating data signals for extending range between linked video terminals or gaming machines, Model 4154 POF Fiber Optic Repeater provides link distance of greater than 500 m with 2 mm Hard Clad Silicon fiber cable. Providing fully galvanic isolation between fiber and RS232 monitor ports, unit comes with RS232 Traffic Monitor port. Unit’s RS232 port is protected from damage by...
Read More »
QuickSwitch® Fiber Optic Switch features front panel pushbutton.
Used for switching data to multiple displays, billboards and signs, Model 6316 QuickSwitch® Fiber Optic Switch comes with MEMS- based mirror switch technology. Operated at 1310 nm and 1500 nm wavelength, unit features single mode, 9/125 micron fiber LC simplex ports. Designed with front LED’s for indication of power status and present position, QuickSwitch® comprises of A and B labeled LC...
Read More »
Model 6280 LC Duplex A/B Switch features front panel LED display.
Designed with LC Duplex, Multi-mode, 62.5/125 micron A, B and COM ports, Model 6280 LC Duplex A/B Switch features both front panel push button control and RS232 remote control. Housed in slim desktop style enclosure, unit consists of DB9 female Serial Interface Remote port for remote controlling. Accepting RS232 ASCII commands with 1300nm wavelength, unit’s ports are configured per...
Read More »Model 9050 RJ11/12 A/B Switch features EMI/RFI shielded packaging.
Encased in metal black box package, Model 9050 16-Channel RJ11/12 A/B Switch is ideal for fax, modem, and phone line switch applications. Simultaneously controlling all channels with front panel rotary switch, unit supports 4 center pins of RJ11/12 interface. Eliminating need to plug and unplug cables to switch simultaneously between positions A and B, Manually operated 9050 utilizes high quality...
Read More »6253 A/B Switch offers A, B and COM ports of 62.5/125 micron.
Switching fiber signals via mirror/prism switch technology, QuickSwitch Model 6253 Quad Channel ST Duplex A/B Switch's ports support wavelength of 850nm. Allowing access to two fiber optic networks from one fiber optic network, Switch offers A, B, and COM ports that are transparent to all data and are comprised of ST and multi-mode. Featuring DB9 port for remote monitoring of switch position,...
Read More »
New UPS Device Available in Desktop and Board-only Configurations
SCups® utilize Super Capacitors provides low maintenance solution with an high cycle life and without the shelf life concerns of typical battery backup systems. Assists with the fluctuating power of low power remote systems where primary power can be interrupted. Ideal for assistance with backup and peak assist power management for solar power, wind power, medical facilities/hospitals, remote...
Read More »ESL Releases Data Communications Video Highlighting Product Lines
Electro Standards Laboratories has released a new video highlighting its Data Communications Product Line. The video features a variety of images and applications of the various types of Copper and Fiber Optic Network Switches (QuickSwitch, LineSelect and PathWay), Interface Conveters, Cable Assemblies, Network Test & Telecom Test Equipment. The video contains examples of different product lines...
Read More »
New Model 7391 DB25 A/B Switch Features Automatic Fallback and RS232 Remote Control
Designed to assist in eliminating network downtime. Allows DB25 interface devices or networks to be connected on ports A and B for switching to either port. Unit is switched manually via front panel pushbutton or from a remote location using RS232 data ASCII commands.
Read More »
New Models 4152, 4152-DIN and 4153 of Media Converters Operate from -40 to +85 degree C
Supports data transfer between RS485/RS422/RS232 copper to ST fiber optic networks. Features ESD protection circuitry on all receivers and transmitters for both RS232 and RS485/422 interfaces. Model 4152 is encased as a desktop unit, Model 4152-DIN for DIN rail mounting and Model 4153 is available as a board only for embedded applications.
Read More »
New Model 9214 Module Patch Panel Comes with Feedthrough RJ45 Ports
New Model 9214 Module Rack Feedthrough Patch Panel is designed for installing in the Model 9025 Rackmount Chassis along with switch modules and filler panels. The panel features four ports of RJ45 Cat5e RJ45 to RJ45 Cat5e Ports. The unit’s feedthrough connections are engineered to withstand numerous install/remove cycles of Ethernet cables from front side.
Read More »
Intercom Headset Cable Assembly comes with volume control option.
Model 9364-X/Y Intercom Headset Cable Assembly is suitable for TV or media broadcasters, producers and reporter applications. Unit is equipped with phone plug and telex connector. Product is ideal for video/audio applications.
Read More »
Fiber Optic Repeater comes with an external wall mount power supply.
Used for regenerating data signals for extending range between linked video terminals or gaming machines, Model 4154 POF Fiber Optic Repeater provides link distance of greater than 500 m with 2 mm Hard Clad Silicon fiber cable. Providing fully galvanic isolation between fiber and RS232 monitor ports, unit comes with RS232 Traffic Monitor port. Unit’s RS232 port is protected from damage by...
Read More »
QuickSwitch® Fiber Optic Switch features front panel pushbutton.
Used for switching data to multiple displays, billboards and signs, Model 6316 QuickSwitch® Fiber Optic Switch comes with MEMS- based mirror switch technology. Operated at 1310 nm and 1500 nm wavelength, unit features single mode, 9/125 micron fiber LC simplex ports. Designed with front LED’s for indication of power status and present position, QuickSwitch® comprises of A and B labeled LC...
Read More »
Model 6280 LC Duplex A/B Switch features front panel LED display.
Designed with LC Duplex, Multi-mode, 62.5/125 micron A, B and COM ports, Model 6280 LC Duplex A/B Switch features both front panel push button control and RS232 remote control. Housed in slim desktop style enclosure, unit consists of DB9 female Serial Interface Remote port for remote controlling. Accepting RS232 ASCII commands with 1300nm wavelength, unit’s ports are configured per...
Read More »Model 9050 RJ11/12 A/B Switch features EMI/RFI shielded packaging.
Encased in metal black box package, Model 9050 16-Channel RJ11/12 A/B Switch is ideal for fax, modem, and phone line switch applications. Simultaneously controlling all channels with front panel rotary switch, unit supports 4 center pins of RJ11/12 interface. Eliminating need to plug and unplug cables to switch simultaneously between positions A and B, Manually operated 9050 utilizes high quality...
Read More »