TDK-Lambda Americas Inc.
Suite 325
National City, CA 91950
New AC-DC DIN Rail Mount Power Supply Delivers 48V at 10A
DRB480-48-1 has operating input range of 90 to 264Vac. Features power density of 6 Watts per inch3. Output can be adjusted from 48 to 52.8V to offset voltage drops in cabling.
Read More »
New EMC Filters with Rating of +/- 40VDC at 20A
Designed with high differential and common mode noise attenuation. Available with standard production screening and baseplate temperature rating of -40°C to +115°C. Suitable for harsh and demanding environments, including MIL-COTS vehicle and airborne applications.
Read More »
TDK Corporation Launches TDK-Lambda i6A4W Family Certified From UL/CSA 60950-1 and IEC/EN 60950-1
Capable of operating input voltage of up to 9 to 53V and output voltage that is adjustable from 3.3V to 15V or 3.3V to 40V. Provide an output voltage adjustment pin, positive or negative logic remote on-off, remote sense, input under-voltage, over-current and thermal protection. Features efficiency up to 97.5% and maximum output power of 250W.
Read More »
TDK Introduces CUS100ME Series AC-DC Power Supplies for B and BF Rated Medical Equipment
Available in 50.8 x 101.6mm open frame version footprint with height of 31.5mm. Offers 12V, 15V, 18V, 24V, 28V, 36V and 48V outputs with an input of 85 to 264Vacs range. Features an isolation of 4kVac (input to output), 4kVac (input to ground) and 1.5kVac (output to ground) and maximum touch current of 100µA.
Read More »
TDK Launches DRM40 Series Redundancy Module with Two Isolated DC Good PhotoMOS Relays
Housed in 35 x 124 x 125 mm (W x H x D) sized metal enclosure and mounted on TS-35/7.5 and TS-35/15 DIN rails. Features two front panel mount DC Good LEDs and can be operated -40°C to +70°C temperature range. Designed for applications such as industrial process control, factory automation, battery chargers, and test and measurement equipment.
Read More »
TDK Corporation Launches Motion, Sound and Ultrasonic Sensor Solutions, Embedded Motor Control and Magnetic Sensors, Power Supply Solutions as well as Passive Components At Embedded World 2019
HVC 4420F embedded motor control and magnetic sensors by TDK-Micronas enables direct drive of small brush-type, stepper or brushless electric motors in smart actuators. Meets increased functional and diagnostic demands with flash memory extended to 64 KB and SRAM to 4 KB. Offers the storage capacity and processing capability to execute actions which are unique in the environment of smart...
Read More »
New DRF960-24-1 DIN Rail Power Supply Withstands Surges Up to 300 Vac for 5 Seconds
Supplies a peak load of 1440 W for up to 4 seconds to power capacitive and inductive loads. Offered in 110 x 123.4 x 139 mm (W x H x D) dimensions with 24 V output, adjustable from 24 V to 28 V. Features remote on/off and a 30 V 1A rated DC relay contact and suitable for applications such as industrial process control, factory automation and test and measurement equipment.
Read More »
New DRL100-24-1/C2 Power Supply Housed in a Rugged Plastic Enclosure with Overall Dimensions of 72 x 91 x 55.6 mm (W x H x D)
Class II construction with double insulation for operation without an earth ground connection. Operating ambient temperature is -20°C to +71°C, -25°C cold start, derating linearly above 40°C to 40% load at 71°C. Off-load power consumption is less than 0.5W and the full load efficiency is 90% with a 230Vac input.
Read More »
TDK Launches PFH500F-28 AC-DC Power Modules for Commercial-Off-The-Shelf Applications
The PFH500F-28 AC-DC Power Modules come in 101.6 x 61.0 x 13.3 mm metal enclosures that are encapsulated for MIL-STD-810G shock and vibration. The units are offered with an isolation of 2,500 Vac (input to ground), 3,000 Vac (input to output) and 1,500 Vdc (output to case). The modules feature remote on/off, pre-biasing start-up, droop mode current share, a DC Good signal and OVP, UVP, OCP, OTP...
Read More »
New DTM110-C8 Power Supplies are Suitable for B and BF Rated Equipment
The DTM110-C8 Class II Power Supplies are offered with 12V, 15V, 19V, 24V, 28V, 36V and 48V outputs and accepts input in the range of 90 to 264 VAC. The units come in 63 mm x 140 mm x 33 mm (W x L x H) IP41 rated enclosure. The power supplies feature isolation of 1,500Vac, 4,000Vac of input to ground and input to output respectively. The devices are suitable for home healthcare, hospital, test,...
Read More »