ITT Industries - Cannon
Newton, MA 02458
Share:
ITT's Custom Connector and Special Product Program Shortens Project Development Time
Custom connectors and assemblies specified for major aerospace, hydrospace programs... SANTA ANA, Calif. - August 1, 2006 - Design engineers in the aerospace, hydrospace and special project industries can now specify custom connectors and assemblies from ITT, Electronic Components, shortening project development time. ITT has pioneered the development of special purpose electrical connectors...
Read More »
Electrical Transceiver complies with SFP industry standard.
Model SFP-155E delivers full duplex STM-1 electrical SDH transport over coaxial cables at 155 Mbit/s and is fully interchangeable with STM-1 optical SFP modules. Electrical interface is compliant with telecom ITU-T G.703 recommendations and can be connected using standard DIN 1.0/2.3 75-ohm cable connectors. Hot-pluggable transceiver is suited for SDH add/drop multiplexers, optical edge devices,...
Read More »
Board/Harness Connector suits automotive applications.
ECU system provides modular, landed contact system with one plug assembly that eliminates female half of connector system. Power and signal contacts are encased in custom housing, and latching system within housing ensures secure mating to PCB. Designed to mate directly to engine management system, harness to PCB connector system can be mounted directly on engine. ECU contacts can be configured...
Read More »
SMA Connectors suit non-harsh environment applications.
Brass-bodied, 50 ohm SMA Connectors include straight and right angle plugs and jacks for flexible coaxial cables, 0.141 and 0.085 in. semi-rigid and conformable cables, as well as PCB and flange mount variants. Units include crimp/solder center contacts on plugs and stand-off steps on legs of PCB jacks. Gold-plated finish facilitates performance from dc to 18 GHz. Units are inter-mateable with...
Read More »
Switches are compatible with lead-free solder process.
Lead-Free Switches such as trackball navigation switch, and KMR, KMS, TPC, TPA, and KSU tact switches contain no cadmium, mercury, or other toxic substances, such as hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers. With height of 6 mm, Elum(TM) illuminated pushbutton switches feature right angle actuator with integral LED, facilitating design of front panels for...
Read More »
Motor Connector has low-profile design.
Designed for motors with flange size of 60 x 60 cm or less, vibration- and shock-resistant M3(TM) features IP67 sealing. Housing has one power and 3 feedback insulators separated by metal shielded walls, and 2 sealed entries are provided for power and feedback cables. Specifications include 48 V/5 A power rating, 50-630 V operating voltage, and 2-10 A current rating. Components include zinc die...
Read More »
Ethernet Accessories withstand harsh environments.
Waterproof to IP67, CAT6 and CAT 5E RJ45 Ethernet Connectors are IDC terminated, with 360Ã-
Read More »
Circular Connectors include 37- and 51-way versions.
Series APD DIN72585 Connectors feature lightweight composite bodies with IP69K-sealed connectors and bayonet coupling that ensures tight, vibration-resistant connection. With insulation resistance of 10 Mohm, 37- and 51-way connectors are voltage-proof to 1,000 Vac and rated for max of 12 A at 85Ã-
Read More »
Universal Contact offers 2-way version.
Made of selectively-plated gold over beryllium copper, surface-mount Universal Contact incorporates pre-load and anti-lift features. X-Y-Z axis movement ensures connection between contact and component assembly, even during shock and vibration. Because unit has no mating component, it can be positioned at any angle. Measuring 2.5 mm in free height, Universal Contact is offered on 1.5 mm pitch...
Read More »
Pushbutton Switch features LED built into actuator.
Right angle, C&K ELUM(TM) illuminated switch features self-cleaning SPDT contact that withstands current voltage from 20 mV to 50 Vdc, and from 0.01-230 mA. Latching version suits switching functions such as mode select and power on/off, while momentary version is suited for test, reset, and notification functions. Available in through-hole and surface-mount configurations, switch is compatible...
Read More »
ITT's Custom Connector and Special Product Program Shortens Project Development Time
Custom connectors and assemblies specified for major aerospace, hydrospace programs... SANTA ANA, Calif. - August 1, 2006 - Design engineers in the aerospace, hydrospace and special project industries can now specify custom connectors and assemblies from ITT, Electronic Components, shortening project development time. ITT has pioneered the development of special purpose electrical connectors...
Read More »
Electrical Transceiver complies with SFP industry standard.
Model SFP-155E delivers full duplex STM-1 electrical SDH transport over coaxial cables at 155 Mbit/s and is fully interchangeable with STM-1 optical SFP modules. Electrical interface is compliant with telecom ITU-T G.703 recommendations and can be connected using standard DIN 1.0/2.3 75-ohm cable connectors. Hot-pluggable transceiver is suited for SDH add/drop multiplexers, optical edge devices,...
Read More »
Board/Harness Connector suits automotive applications.
ECU system provides modular, landed contact system with one plug assembly that eliminates female half of connector system. Power and signal contacts are encased in custom housing, and latching system within housing ensures secure mating to PCB. Designed to mate directly to engine management system, harness to PCB connector system can be mounted directly on engine. ECU contacts can be configured...
Read More »
SMA Connectors suit non-harsh environment applications.
Brass-bodied, 50 ohm SMA Connectors include straight and right angle plugs and jacks for flexible coaxial cables, 0.141 and 0.085 in. semi-rigid and conformable cables, as well as PCB and flange mount variants. Units include crimp/solder center contacts on plugs and stand-off steps on legs of PCB jacks. Gold-plated finish facilitates performance from dc to 18 GHz. Units are inter-mateable with...
Read More »
Switches are compatible with lead-free solder process.
Lead-Free Switches such as trackball navigation switch, and KMR, KMS, TPC, TPA, and KSU tact switches contain no cadmium, mercury, or other toxic substances, such as hexavalent chromium, polybrominated biphenyls, or polybrominated diphenyl ethers. With height of 6 mm, Elum(TM) illuminated pushbutton switches feature right angle actuator with integral LED, facilitating design of front panels for...
Read More »
Motor Connector has low-profile design.
Designed for motors with flange size of 60 x 60 cm or less, vibration- and shock-resistant M3(TM) features IP67 sealing. Housing has one power and 3 feedback insulators separated by metal shielded walls, and 2 sealed entries are provided for power and feedback cables. Specifications include 48 V/5 A power rating, 50-630 V operating voltage, and 2-10 A current rating. Components include zinc die...
Read More »
Ethernet Accessories withstand harsh environments.
Waterproof to IP67, CAT6 and CAT 5E RJ45 Ethernet Connectors are IDC terminated, with 360Ã-
Read More »
Circular Connectors include 37- and 51-way versions.
Series APD DIN72585 Connectors feature lightweight composite bodies with IP69K-sealed connectors and bayonet coupling that ensures tight, vibration-resistant connection. With insulation resistance of 10 Mohm, 37- and 51-way connectors are voltage-proof to 1,000 Vac and rated for max of 12 A at 85Ã-
Read More »
Universal Contact offers 2-way version.
Made of selectively-plated gold over beryllium copper, surface-mount Universal Contact incorporates pre-load and anti-lift features. X-Y-Z axis movement ensures connection between contact and component assembly, even during shock and vibration. Because unit has no mating component, it can be positioned at any angle. Measuring 2.5 mm in free height, Universal Contact is offered on 1.5 mm pitch...
Read More »
Pushbutton Switch features LED built into actuator.
Right angle, C&K ELUM(TM) illuminated switch features self-cleaning SPDT contact that withstands current voltage from 20 mV to 50 Vdc, and from 0.01-230 mA. Latching version suits switching functions such as mode select and power on/off, while momentary version is suited for test, reset, and notification functions. Available in through-hole and surface-mount configurations, switch is compatible...
Read More »