Adams Magnetic Products Co.
Elmhurst, IL 60126
Round Base Magnetic Assemblies are rubber-coated.
Neodymium Round Base (Neo RB) magnetic assemblies with stud and standoff pieces have pulling force of 20, 32, or 105 lb. Encased in steel, they are available in standard black rubber coating that resists rust and scratches and in diameters of 1.677, 2.574, and 3.471 in.; additional sizes and strengths may be specified. They are suited for wide range of applications including antenna mounts,...
Read More »
Pocket Magnets identify valuable, ferrous materials.
Available in 0.375, 0.5, and 0.75 in. diameters, Pocket Magnets offer pulling force of 2, 5, or 7 lb. Each is approximately 2.5 in. long and comes in standard silver color with attached chain for hanging from key ring, belt loop, or hook. Pocket Magnets can also be specified in choice of colors, with aluminum or plastic housing, and with custom imprinting such as company logos and contact...
Read More »Flexible Magnetic Strips offer near seamless connections.
Offering adhesion and flexibility over -40 to +160-ºF range, EDGEMAG(TM) and MATCHMAG(TM) strips are designed to eliminate visible seams between graphic panels. EDGEMAG holds side-to-side as well as front-to-back, whereas MATCHMAG matched pole strips are suited for face-to-face applications. Both products are available in 0.060 in. x 0.50 in. x 100 ft long rolls with or without adhesive, but...
Read More »
Magnetic Receptive Sheets offer backdrop for magnets.
Measuring 0.025 in. thick x 24.0 in. wide, MAGBOND(TM) rubber-based ferrous sheet is supplied as 50 ft long roll. It is available with interior or outdoor adhesives, white matte vinyl coatings, or adhesive on one side and white vinyl on other side. Combining printable surface with lightweight metal, MAGSTEEL(TM) sheet is 0.10 in. thick x 36.61 in. wide and supplied in 82 ft rolls. Portable...
Read More »
Flexible Magnetic Sheets have inkjet-compatible surface.
Used like paper in inkjet printers, PRINTMAG(TM) magnetic sheets provide on-demand options for end-users with small runs or one-of-a-kind, cut-to-size custom business cards and signage. White sheets are 0.012 in. thick, finished in matte or gloss, and available in 8.5 x 11 in. full sheets or with 10 pre-scored business cards ready to be pressed out after printing.
Read More »Neo Magnet Assemblies are offered in various configurations.
Assemblies made with Neodymium (Neo) magnets are available in 3 main styles: round base, channel, and sandwich. Each is constructed with magnet encased in plated or powder-coated steel cups, channels, or plates. Coatings are available for outdoor use, and rubber boots provide scratch resistance. Use of Neo magnets increases capacity of 30 lb assembly to 100 lb while staying within given size and...
Read More »Adams Magnetic Products Co. is Pleased to Announce The Immediate Promotion of John Maisch from Business Development Manager to General Manager
March 10, 2023 — As General Manager, Maisch will report to Adams’ COO, John Cosmas, and will oversee the company’s sales, operations, engineering, marketing, and supply chain departments. A veteran of the magnetics industry, Maisch joined the Adams team in 2018 and was tasked with increasing sales via direct collaboration with customers’ engineering, product, and purchasing departments....
Read More »Adams Magnetic Products Proud to Add Carlsbad Location to ISO 9001:2015 Certification
Carlsbad, CA (February 20, 2019) -- Adams Magnetic Products Co. announces the addition of its Carlsbad facility to ISO 9001:2015 Certification. The Carlsbad facility opened in November 2017 and received ISO 9001 certification in December 2018. ISO is an internationally recognized standard that ensures products and services meet the needs of clients through an effective quality management system....
Read More »Adams Magnetic Products Names Business Development Manager
Elmhurst, IL (September 2018) -- Adams Magnetic Products Co. announces the addition of John Maisch as Business Development Manager, reporting to Adams’ COO, John Cosmas. Maisch will serve new and existing customers’ needs for design and procurement assistance with all types of permanent magnets and custom magnetic assemblies, from simple to high-tech. His primary responsibilities will focus...
Read More »Adams Magnetic Products Expands Production Capabilities
Elmhurst, IL and Carlsbad, CA (May 2018) -- Adams Magnetic Products Co. has expanded its flexible magnet fabrication service capabilities by investing in equipment for two additional production lines. Full production lines were added both in Elmhurst, IL and Carlsbad, CA that can run flexible magnet strip material at more than 300 feet per minute, applying laminate and slitting to the desired...
Read More »Magnets on the Move
Come See Adams Magnetic Products in Our New Facility Irvine, CA (January 2018) - Goodbye Irvine, hello Carlsbad. We are pleased to announce that Adams Magnetic Products has moved to a new facility in Carlsbad, California, about 50 miles south of our previous location. The decision was motivated by our continuous desire to improve our operations and to better align ourselves in the dynamic markets...
Read More »Adams Magnetic Products Hires Mike Devine as Senior Applications Engineer
Elmhurst, IL - Adams Magnetic Products, Co., a leading supplier of permanent magnets, rare earth magnets, flexible magnets and magnetic assemblies has appointed Michael Devine as Senior Applications Engineer in its Elmhurst facility. Mr. Devine will provide direct engineering support to Adams’ customer base as well as sales and production support, primarily focusing on permanent and...
Read More »Adams Magnetic Products Adds New Applications Engineer
Brody Tucker is a new technical resource to help customers choose the right magnet. Elizabethtown, KY- – Adams Magnetic Products, Co., a leading supplier of permanent magnets, rare earth magnets, flexible magnets and magnetic assemblies is pleased to introduce Brody Tucker as their new Applications Engineer. In this position, Brody will help drive the design, fabrication, and testing of...
Read More »Adams Magnetic Products Names John Kovatch Business Development Manager
Elizabethtown, Kentucky- – Adams Magnetic Products Co. announces John Kovatch as Business Development Manager, reporting to Adams’ Sr. Vice President of Business Development, Larry Budnik. Kovatch will serve new and existing customers’ needs for design and procurement assistance with all types of permanent magnets and custom magnetic assemblies, from simple to high-tech. His primary...
Read More »Adams Magnetic Products Hires John Cosmas as COO
Elmhurst, Illinois - Adams Magnetic Products Co. announces John Cosmas as chief operating officer. In this newly-created position, he will oversee the business' practices and policies, including involvement with international supply chain management and financial direction. Cosmas will work directly with Adams' president Scott Lewis to guide the general managers leading an extended family of...
Read More »Adams Magnetic Products Opens N.Y. Office, Names Two Sales Representatives
Adams Magnetic Products Co. announces the opening of a New York sales office and the addition of two, new, sales representatives. Located at Metro Office Centre in Rochester, Jim Miller and Patrick Hanna will serve customers' magnetic products needs in the Northeast and beyond. Reporting to Adams' General Manager Kerry Buntrock, Miller and Hanna collaborate with the company's inside sales and...
Read More »