B&K Precision Corporation

B&K Precision Expands Its Line of Affordable Programmable DC Electronic Loads Ranging from 300 W - 5000 W
Construction Equipment and Supplies

B&K Precision Expands Its Line of Affordable Programmable DC Electronic Loads Ranging from 300 W - 5000 W

January 16, 2009 Yorba Linda, CA January, 2009 - B&K Precision continues to grow its line of affordable Programmable DC Electronic loads with the introduction of eight additional models. The ten models of the 8500 family of Programmable DC Electronic Loads offer a wide operating range, flexible operating modes, and excellent measurement accuracy, making the 8500 Series well suited for...

Read More »
Digital Storage Oscilloscopes deliver flexible performance.
Test & Measurement

Digital Storage Oscilloscopes deliver flexible performance.

Models 2540 and 2542 are 2-channel DSOs featuring 60 and 100 MHz max bandwidths, respectively; up to 1 GS/sec sample rate; and 4,000-point record length for each channel. While auto measurement functions and analog-style knobs facilitate use, troubleshooting and debugging are aided by such features as various triggering capabilities, digital filtering, waveform recorder, delayed sweep/zoom, mask...

Read More »
Test & Measurement

DC Electronic Load Tester comes in compact package.

Measuring 3.5 x 6.9 x 11.10 in., Model 8540 DC Electronic Load can operate in constant current (CC), constant voltage (CV), or constant resistance (CR) mode. It may be used on bench as well as production floor to measure and display voltage/current or resistance/power values in real-time. Operation covers 0-60 V, 1 mA to 30 A (150 W max), range and allows up to 400 instrument settings to be...

Read More »
Test & Measurement

Auto/Manual Ranging DMMs offer single-handed operation.

Able to measure voltage to 750 Vac and 1,000 Vdc as well as AC/DC current to 10 A, battery-powered 2705B/2708B/2709B have compact design; auto-power-off feature; and diode/continuity tests. Model 2705B has 3,400-count LCD and displays resistance values to 40 Mohm. Respectively, 2708B and 2709B feature 3,400- (with 34-segment bar graph) and backlit 6,600-count LCDs as well as resistance...

Read More »
Switching DC Power Supply features USB charging port.
Electrical Equipment & Systems

Switching DC Power Supply features USB charging port.

Delivering 1-36 V and 0-3 A isolated output, 108 W Model 1550 operates as constant voltage source or as constant current source. Automatic crossover to either mode of operation occurs when load condition changes. Measuring 2.8 x 6.0 x 9.8 in., microcontroller-based power supply includes over-voltage and over-temperature protection, as well as front panel-mounted USB 1.1 charging port that enables...

Read More »
Digital Storage Oscilloscope features color display.
Laboratory and Research Supplies and Equipment

Digital Storage Oscilloscope features color display.

Offering 40 MHz bandwidth and 500 MS/sec sample rate, model 2532 Dual-Channel Digital Storage Oscilloscope offers triggering capabilities such as pulse width and line-selectable video trigger, 11 automatic measurements, and FFT functions for debugging circuits. Measuring 11.4 x 11.8 x 5.9 in., 10 lb benchtop unit includes analog-style knobs and controls, color LCD, and USB port. It has 4,000...

Read More »
Digital Storage Oscilloscope features 60 MHz bandwidth.
Laboratory and Research Supplies and Equipment

Digital Storage Oscilloscope features 60 MHz bandwidth.

Measuring 12.2 x 10.6 x 5.8 in., Model 2534 weighs 8 lb, and comes with analog-style knobs/controls and PC software that can be used to capture, save, and analyze waveforms and measurement results. It has triggering, digital filtering, waveform recorder, delayed sweep/zoom, mask testing, automatic measurements, and FFT functions to debug circuits. Features include 400 MS/sec sample rate, 4,000...

Read More »
Hand-Held RF Field Strength Meter is battery operated.
Test & Measurement

Hand-Held RF Field Strength Meter is battery operated.

Measuring 4 x 1.8 x 9 in. and weighing less than 2.0 lb, Model 2640 features frequency range of 100 kHz to 2,000 MHz, noise floor of -110 dBm to detect weak signals, and basic spectrum analyzer functionality. It has 2 GHz frequency counter, phase-locked loop for precise frequency tuning, detachable antenna, and back-lit display. Meter supports RS-232C serial communication, detects wide band and...

Read More »
Electrical Equipment & Systems

Interface Software adds programs to IC tester libraries.

AK57X Interface Software with USB Dongle interfaces handheld IC testers with CompactLink Functional IC Test Generating Software, which contains high-level descriptive test programming language optimized for generation of analog and digital IC test programs. It requires RS-232 or USB connection to PC and runs with Microsoft XP and USB jack. Dongle, which also includes pocket knife keychain, must...

Read More »
Digital DC Power Supplies offer up to 72 V output.
Electrical Equipment & Systems

Digital DC Power Supplies offer up to 72 V output.

Available in 5 models, laboratory-grade, bench-top Series 912 offers programmable outputs ranging from 0-32 V, 0-3 A to 0-72 V, 0-1.2 A. Microprocessor control circuitry permits power supplies to offer transient response times of less than 20 ms with load regulation of 0.01% +2 mV. All models can be remotely controlled from PC with USB or RS-232 interface. Additionally, Model 9123A supports...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers