Sensoray Co., Inc.
Tigard, OR 97223
Share:
Converter creates digital video from analog signals.
Connected to host computer and powered through USB 2.0 port, 2250 USB MPEG capture device converts analog NTSC or PAL color video and audio into one of supported MPEG digital video formats: MPEG1, MPEG2, or MPEG4. Range of supported bit rates allows for optimal size/quality ratio for various applications. SDK for Microsoft Windows facilitates integration of video capture into any application....
Read More »
I/O Module controls solid state relays.
Model 2652 monitors and controls up to 8 solid state relays via single Category-5 patch cable connected to 2601 communication module. Each SSR socket may be populated with ac in, ac out, dc in, or dc out SSR. To help minimize errors from electromechanical switch bounce, module applies software debounce filter to each input SSR. While configured as output, SSR may be controlled by client, or it...
Read More »Image Processor provides HDTV capture, display, and storage.
Suited for embedded systems in broadcast and medical markets, 1080i-compatible Model 2246 captures HDTV signal from HD or SD-SDI source and formats it for display and image compression. High-speed hardware can scale and add text/graphics prior to compression, display, and storage. Scan converter section formats video inputs for DVI-D LCD monitors. USB 2.0 port receives external commands and sends...
Read More »CPU Board suits PC/104 systems.
Based on Elan SC520 running at 133 MHz, Model 303 is equipped with 32 MB soldered-on flash memory, Compact Flash memory card, and sockets for 128 MB of SDRAM. System BIOS is programmed into on-board flash, enabling portable applications and operation system via Compact Flash module. Board includes 2 RS-232 ports, 4 three-wire ports, hard drive storage through IDE port, and rapid communications...
Read More »Video Server stores still images in internal memory.
Programmed with FTP server, 2411 Still Image Video Server consists of PC/104+ board stack programmed to capture single frames from composite sources such as radar, ultrasonic sources, and video cameras. Frame capture can be triggered from software command or external switch, and images are downloaded via Ethernet port. JPEG compression function allows use of internal storage via Compact Flash or...
Read More »Frame Grabber suits traffic monitoring.
Combining functions of frame grabber, hardware JPEG compression, and digital I/O into one PCI board, Model 617-4 accepts 4 composite video inputs and routes them to separate video decoders for digitizing. Device offers capture rate of 30 fps at 640 x 480 resolution or 120 fps at 320 x 240 resolution. Caption buffer allows overlaying text on each frame. Text is within transparent box that may be...
Read More »Software decodes multiple MPEG-1/2 streams simultaneously.
Real-time video display and control software includes multi MPEG stream player and MPEG player SDK. Model 2400WDS can display decoded video streams over background maps or building plant. Programs include pan, zoom, and tilt controls for use with cameras attached to Model 2412 video servers. Model 2400SDK software development kit includes set of decoder and display functions to simplify...
Read More »Video Converter is packaged for outdoor use.
Controlled via Web browser, Model 2412SYS video-over-IP streaming solution converts PAL or NTSC video into 802.11b stream using UDP or RTP Ethernet protocol. Built-in directional antenna ensures unit-to-unit outdoor range of up to 1 mile. System accepts input power from 10-36 Vdc and draws 6 W for one video channel. Bit rate from MPEG-2 codec can be reduced to as low as 500 kbits/s to minimize...
Read More »Frame Grabber executes hardware JPEG compression.
Model 617 combines functions of 16 x 4 video crosspoint switch, frame grabber, hardware JPEG compression, and digital I/O into one PCI board. It features capture at 30 fps for interlaced NTSC and 25 fps for PAL, 16 video inputs, 4 real-time outputs, and 32 digital I/O lines. Channel-to-channel switching delay is minimized by 4 decoders. Text overlay buffer is provided for frame annotation and...
Read More »Connection Box supplies 12 V, 200 mA for up to 32 cameras.
Model 609TB allows connecting cameras, video monitors, and digital I/O signals to frame grabbers. Signal connections between frame grabber and box are via flat cables. Thirty-two BNC's connect composite video to frame grabbers. Transorb diodes protect each input from power surges. Eight real-time video outputs are available for display on video monitors. Thirty-two electromechanical relays switch...
Read More »