Pasternack Enterprises

Analog Phase Shifters housed in rugged Kovar packages.
Electronic Components & Devices

Analog Phase Shifters housed in rugged Kovar packages.

Suitable for radar systems and test equipment, Analog Phase Shifters operate on analog control voltage ranging from 0V to +5V. PE82P2000 and PE82P2001 Phase Shifters support a modulation bandwidth of 50 MHz. PE82P2000 covers 5 GHz to 18 GHz providing monotonic phase shift range of 0° to 400° typical and 7dB insertion loss. PE82P2001 covers 6 GHz to 15 GHz with monotonic phase shift range of...

Read More »
PE88X-Series Active Frequency Multipliers doubles input frequency.
Communication Systems & Equipment

PE88X-Series Active Frequency Multipliers doubles input frequency.

Eliminating need for external LO buffer amplifier stage and additional circuitry, active frequency multipliers require single +5 V DC supply. Producing output power level up to +17 dBm, unit offers DC blocked input/output RF ports. Utilizing efficient GaAs PHEMT semiconductor technology, device offers output frequencies from 8 GHz to 46 GHz and input frequencies from 4 GHz to 23 GHz. Applications...

Read More »
Analog Phase Shifters support frequency bands from 5-18 GHz.
Electronic Components & Devices

Analog Phase Shifters support frequency bands from 5-18 GHz.

Used to control phase characteristics in processing of microwave signals, PE82P2000 and PE82P2001 can also be used as phase modulators to control modulating baseband signal. MIL-Spec compliant units come in rugged, hermetically sealed Kovar packages with gold-over-nickel plating. Respectively, PE82P2000 and PE82P2001 cover 5–18 GHz and 6–15 GHz with continuously variable and...

Read More »
New Pasternack Waveguide Directional Couplers offer highly accurate performance up to 33 GHz.
Electronic Components & Devices

New Pasternack Waveguide Directional Couplers offer highly accurate performance up to 33 GHz.

Featuring 74 unique models and spanning a frequency range of 5.85 GHz to 33 GHz, Waveguide directional couplers come in two physical configurations including “Crossguide” and “Broadwall” versions and offer either UG-style or CPR-style flanges. Presented in sizes ranging from WR-137 to WR-34 and offered in 10, 20, 30, 40 and 50 dB coupling levels with full waveguide operational bandwidth,...

Read More »
Radar Demonstration Kits covering 2.4 GHz ISM frequency band.
Communication Systems & Equipment

Radar Demonstration Kits covering 2.4 GHz ISM frequency band.

Used for classroom instructionÂ- or R&D, PEM11000-KIT and PEM11002-KIT can be used to study and learn about principles of microwave radar object detection, motion detection, and determining object range. Experimental radar operating modes can be selected for CW, FMSW, or Doppler, and output waveforms can be set for Single Tone, Frequency Ramp, or Sawtooth. Kit contains all...

Read More »
High-Rel Frequency Dividers cover 0.5-18 GHz range.
Agricultural & Farming Products

High-Rel Frequency Dividers cover 0.5-18 GHz range.

Available in 2, 4, 5, 8, and 10 divide-by-prescaler configurations, Frequency Divider Modules utilize GaAs HBT MMIC semiconductor technology that produces low additive single sideband phase noise performance with typical levels down to -155 dBc/Hz at 100 KHz offset. Input power ranges from -20 to +10 dBm with output power ranging from -1 to -4 dBm, depending on model. Housed in hermetically...

Read More »
Voltage Variable Attenuators provide 60 dB attenuation.
Electronic Components & Devices

Voltage Variable Attenuators provide 60 dB attenuation.

Available in 6 models covering octave broadband frequencies from 400 MHz to 18 GHz, Voltage Variable Attenuators are suited for use with variable gain amplifiers, power level controls, and feed-forward amplifiers. PIN diode-based devices provide broadband flatness where output level can be adjusted continuously by varying analog voltage on input control line. With CW input power rated up to +23...

Read More »
Waveguide Bends operate up to 90 GHz across 12 frequency bands.
Communication Systems & Equipment

Waveguide Bends operate up to 90 GHz across 12 frequency bands.

Operating acrossÂ- C to W bands, waveguide bends do not degrade transmission signal in waveguide systems where signal is required to turn or bend 90°. E- and H-plane configurations are available constructed of gold-plated, oxygen-free hard copper, or painted copper alloy (depending on the model). Along with VSWR as low as 1.08:1, these 30 unique models come in sizes from WR-137 (5.85...

Read More »
Waveguide Transitions operate up to 110 GHz across 14 bands.
Architectural & Civil Engineering Products

Waveguide Transitions operate up to 110 GHz across 14 bands.

Operating from 5.85–110 GHz across 14 frequency bands, Waveguide to Waveguide Transitions are used in high power wireless applications such as instrumentation, test benches, SATCOM, MILCOM, radar, and telecom where signal strength and integrity are critical. Units provide smooth transition between different waveguide sizes with VSWR as low as 1.08:1. Constructed of gold plated or painted brass,...

Read More »
Semi-Rigid Coax Test Probes operate to 6 GHz max.
Fluid & Gas Flow Equipment

Semi-Rigid Coax Test Probes operate to 6 GHz max.

Offered in 0.02, 0.034, and 0.047 in. dia and 3, 6, 9, and 12 in. lengths, semi-rigid test probes assist in testing microwave circuits. Soldering of outer conductor to signal ground and exposed center conductor to trace carrying signal of interest enables sampling measurement without separate subassembly circuit board or adding connector to circuit layout. Versions include straight-cut...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers