Frontier Electronics

0402 SMD Wire Wound Ceramic Chip Inductors
Electronic Components & Devices

0402 SMD Wire Wound Ceramic Chip Inductors

0402C-XXX is a family of a SMD Wire Wound Ceramic Chip inductors with a high Q at high Frequency and SRF up to 12.7 GHz. This family of parts is offered in values ranging from: 1.0 nH(1360mA) to: 68nH(100mA) with the following tolerances: K: ± 10% J: ± 5%, G: ± 2%. The Operating Temperature is from: -40°C to: +125Â-ºC. These parts can be used on Pagers, Mobile...

Read More »
2220 SMD Power Chokes
Electronic Components & Devices

2220 SMD Power Chokes

2220SDF-XXX is a family of a SMD Power Chokes inductors. This family of parts is offered in values ranging from: 0.12 Â-µH (6.6 A) to 10,000 µH (0.05 A) with the following tolerances: M: ± 20% and K: ± 10%. SRF from: 450-50 MHz. DCR from: 0.098-140 W. Operating Temperature is from: -25°C to: +85ºC. Dimension 5.7 x 5.0 x 4.7mm. Suitable for IR re-flows...

Read More »
CCFL Series
Electrical Equipment & Systems

CCFL Series

SMD CCFL INVERTER TRANSFORMERS Good for PDAs, Laptops, Dash Boards, Monitors and Displays.Sizes available from 35.3(L)x8.5(W)x5.5(H) to 25.2(L)x15.2(W)x8.5(H), Power: from 3 watts to 6 watts, Output Voltage: 1600 Vac, Operating Frequency: from 40 KHz to 200 Khz, Efficiency: from 78% to 80%, Operate in a royer and other configurations, Low profile and high power, Taped & reeled packaging or...

Read More »
SMD Common Mode Choke
Electronic Components & Devices

SMD Common Mode Choke

SMD Common Mode Chokes SCM2012F (0805) series and SCM3216F (1206) series suitable for personal computers and peripherals. Impedance range from 90 Ohms to 2200 Ohms @ 100 MHz.; DCR ranges from 0.3 Ohms to 1.2 Ohms; operating current ranges from 370 mA to 200 mA; IR 10 MOhms min. @ 125 Volts, packing: taped & reeled.

Read More »
Ferrite Chip Inductors replace axial leaded inductors.
Electronic Components & Devices

Ferrite Chip Inductors replace axial leaded inductors.

SMD Molded Wire Wound Ferrite Chip Inductors consisting of Model CF453232 (1812-dimensions are 4.5 x 3.2 x 3.2 mm) and Model CF322522 (1210-dimensions are 3.2 x 2.5 x 2.2 mm) are suitable for pick and place equipment. 1812 has inductance range of 0.1 Â-µH to 1000 µH, with usable frequency of 2.5 MHz to 300 MHz. 1210 features inductance of 0.12 µH to 220 µH, with...

Read More »
0402 SMD Wire Wound Ceramic Chip Inductors
Electronic Components & Devices

0402 SMD Wire Wound Ceramic Chip Inductors

0402C-XXX is a family of a SMD Wire Wound Ceramic Chip inductors with a high Q at high Frequency and SRF up to 12.7 GHz. This family of parts is offered in values ranging from: 1.0 nH(1360mA) to: 68nH(100mA) with the following tolerances: K: ± 10% J: ± 5%, G: ± 2%. The Operating Temperature is from: -40°C to: +125Â-ºC. These parts can be used on Pagers, Mobile...

Read More »
2220 SMD Power Chokes
Electronic Components & Devices

2220 SMD Power Chokes

2220SDF-XXX is a family of a SMD Power Chokes inductors. This family of parts is offered in values ranging from: 0.12 Â-µH (6.6 A) to 10,000 µH (0.05 A) with the following tolerances: M: ± 20% and K: ± 10%. SRF from: 450-50 MHz. DCR from: 0.098-140 W. Operating Temperature is from: -25°C to: +85ºC. Dimension 5.7 x 5.0 x 4.7mm. Suitable for IR re-flows...

Read More »
CCFL Series
Electrical Equipment & Systems

CCFL Series

SMD CCFL INVERTER TRANSFORMERS Good for PDAs, Laptops, Dash Boards, Monitors and Displays.Sizes available from 35.3(L)x8.5(W)x5.5(H) to 25.2(L)x15.2(W)x8.5(H), Power: from 3 watts to 6 watts, Output Voltage: 1600 Vac, Operating Frequency: from 40 KHz to 200 Khz, Efficiency: from 78% to 80%, Operate in a royer and other configurations, Low profile and high power, Taped & reeled packaging or...

Read More »
SMD Common Mode Choke
Electronic Components & Devices

SMD Common Mode Choke

SMD Common Mode Chokes SCM2012F (0805) series and SCM3216F (1206) series suitable for personal computers and peripherals. Impedance range from 90 Ohms to 2200 Ohms @ 100 MHz.; DCR ranges from 0.3 Ohms to 1.2 Ohms; operating current ranges from 370 mA to 200 mA; IR 10 MOhms min. @ 125 Volts, packing: taped & reeled.

Read More »
Ferrite Chip Inductors replace axial leaded inductors.
Electronic Components & Devices

Ferrite Chip Inductors replace axial leaded inductors.

SMD Molded Wire Wound Ferrite Chip Inductors consisting of Model CF453232 (1812-dimensions are 4.5 x 3.2 x 3.2 mm) and Model CF322522 (1210-dimensions are 3.2 x 2.5 x 2.2 mm) are suitable for pick and place equipment. 1812 has inductance range of 0.1 Â-µH to 1000 µH, with usable frequency of 2.5 MHz to 300 MHz. 1210 features inductance of 0.12 µH to 220 µH, with...

Read More »

All Topics