Carr Lane Roemheld Mfg. Co.

Hilma NC Standard Hydromechanical Vises
Portable Tools

Hilma NC Standard Hydromechanical Vises

Hilma's NC-series vises are superior to most standard vises, due to built-in hydraulics. With a few cranks of the handle, hydraulic pressure can be built up to 11000 lbs. of clamping force (on the largest size). Switch from clamping small to large parts quickly simply by pulling the pin on the NC vise, sliding the power unit back, and reinserting the pin. In three sizes, the NC vise is easy to...

Read More »
Hinge Clamps provide maximum operating pressure of 3,600 psi.
Electrical Equipment & Systems

Hinge Clamps provide maximum operating pressure of 3,600 psi.

Hinge Clamps are designed for 500,000 cycles, and have swivel contact bolt and reinforced hinge mechanism. Suited for clamping in narrow recesses, unit has linkage to move clamping arm forward as it pivots into clamping position, allowing clamp to exert nearly perfectly vertical clamping force. Designed for manifold mounting, product is available with clamping forces from 500-3,200 lb, with...

Read More »
Clamp Vises are suited for multi-face machining.
Portable Tools

Clamp Vises are suited for multi-face machining.

MC-series Mini Clamp Vises allow clear tool access to 5-out-of-6 workpiece sides. Constructed to promote rigidity, products enable machining of complicated workpieces in single clamping operation. Manual and hydraulic versions come with 60 mm wide jaw and 3,400 lb max clamping force. Concentric type comes in 3 sizes, with 60, 100, and 125 mm jaw widths and 3,400-7,800 lb clamping forces.

Read More »
Electrical Equipment & Systems

Swing Clamps work with fluid pressures up to 7,500 psi.

Top flange mounting allows clamp body to be hidden below fixture surface, while integrated safety clutch mechanism protects part and swing clamp from misloaded parts or misaligned arm. Available in single- and double-acting versions with 7 swing options, clamps feature Viton® wiper seal that provides resistance to aggressive coolant and hot chips. They are offered in 4 piston sizes, in...

Read More »
Electrical Equipment & Systems

Slide Pivot Clamp offers max pressure of 7,500 psi.

Available in 3 sizes, double-acting Slide Pivot Clamp allows workpieces to be inserted from above without impediments, since clamping lever can be moved into small recesses. Piston force is transferred 180° by clamping lever and is available as clamping force with virtually no loss of efficiency. Unit is suited for clamping on machines when high clamping forces are required with minimal...

Read More »
Coupling Elements offer space saving design.
Electronic Components & Devices

Coupling Elements offer space saving design.

Suited for limited installation conditions, 2-part elements can be integrated into fixture designs and used to transmit hydraulic oil or compressed air in machines with pallet transfer systems, from machine tool table to fixture. Offered with 3 nominal diameters for optimum adaptation to flow rate, flush-faced coupling mechanisms come in built-in and threaded-body styles that allow large axial...

Read More »
Concentric Vises clamp odd-sized workpieces.
Portable Tools

Concentric Vises clamp odd-sized workpieces.

Self-centering, all steel vises position and clamp workpieces on defined symmetrical axis, allowing for any contours. Available in 3 sizes, they offer clamping repeatability of ±0.01 mm and can be used in any mounting position. Compact units provide constant length and use application-specific jaws. Spindle area is protected from dirt, chips, and coolant. Applications include machining...

Read More »
Hydraulic Clamps hold thin-walled workpieces.
Electrical Equipment & Systems

Hydraulic Clamps hold thin-walled workpieces.

Built-in locking pistons in threaded-body push clamps, block cylinders, and edge clamps allow floating clamping of workpieces with minimum deformation. Pistons provide light clamping force, but high support force, ensuring parts do not move when being machined. Plungers in cylinders have thin-walled section that expands under high pressure against inside of housing to lock plunger in place....

Read More »
Hilma NC Standard Hydromechanical Vises
Portable Tools

Hilma NC Standard Hydromechanical Vises

Hilma's NC-series vises are superior to most standard vises, due to built-in hydraulics. With a few cranks of the handle, hydraulic pressure can be built up to 11000 lbs. of clamping force (on the largest size). Switch from clamping small to large parts quickly simply by pulling the pin on the NC vise, sliding the power unit back, and reinserting the pin. In three sizes, the NC vise is easy to...

Read More »
Hinge Clamps provide maximum operating pressure of 3,600 psi.
Electrical Equipment & Systems

Hinge Clamps provide maximum operating pressure of 3,600 psi.

Hinge Clamps are designed for 500,000 cycles, and have swivel contact bolt and reinforced hinge mechanism. Suited for clamping in narrow recesses, unit has linkage to move clamping arm forward as it pivots into clamping position, allowing clamp to exert nearly perfectly vertical clamping force. Designed for manifold mounting, product is available with clamping forces from 500-3,200 lb, with...

Read More »
Clamp Vises are suited for multi-face machining.
Portable Tools

Clamp Vises are suited for multi-face machining.

MC-series Mini Clamp Vises allow clear tool access to 5-out-of-6 workpiece sides. Constructed to promote rigidity, products enable machining of complicated workpieces in single clamping operation. Manual and hydraulic versions come with 60 mm wide jaw and 3,400 lb max clamping force. Concentric type comes in 3 sizes, with 60, 100, and 125 mm jaw widths and 3,400-7,800 lb clamping forces.

Read More »
Electrical Equipment & Systems

Swing Clamps work with fluid pressures up to 7,500 psi.

Top flange mounting allows clamp body to be hidden below fixture surface, while integrated safety clutch mechanism protects part and swing clamp from misloaded parts or misaligned arm. Available in single- and double-acting versions with 7 swing options, clamps feature Viton® wiper seal that provides resistance to aggressive coolant and hot chips. They are offered in 4 piston sizes, in...

Read More »
Electrical Equipment & Systems

Slide Pivot Clamp offers max pressure of 7,500 psi.

Available in 3 sizes, double-acting Slide Pivot Clamp allows workpieces to be inserted from above without impediments, since clamping lever can be moved into small recesses. Piston force is transferred 180° by clamping lever and is available as clamping force with virtually no loss of efficiency. Unit is suited for clamping on machines when high clamping forces are required with minimal...

Read More »
Coupling Elements offer space saving design.
Electronic Components & Devices

Coupling Elements offer space saving design.

Suited for limited installation conditions, 2-part elements can be integrated into fixture designs and used to transmit hydraulic oil or compressed air in machines with pallet transfer systems, from machine tool table to fixture. Offered with 3 nominal diameters for optimum adaptation to flow rate, flush-faced coupling mechanisms come in built-in and threaded-body styles that allow large axial...

Read More »
Concentric Vises clamp odd-sized workpieces.
Portable Tools

Concentric Vises clamp odd-sized workpieces.

Self-centering, all steel vises position and clamp workpieces on defined symmetrical axis, allowing for any contours. Available in 3 sizes, they offer clamping repeatability of ±0.01 mm and can be used in any mounting position. Compact units provide constant length and use application-specific jaws. Spindle area is protected from dirt, chips, and coolant. Applications include machining...

Read More »
Hydraulic Clamps hold thin-walled workpieces.
Electrical Equipment & Systems

Hydraulic Clamps hold thin-walled workpieces.

Built-in locking pistons in threaded-body push clamps, block cylinders, and edge clamps allow floating clamping of workpieces with minimum deformation. Pistons provide light clamping force, but high support force, ensuring parts do not move when being machined. Plungers in cylinders have thin-walled section that expands under high pressure against inside of housing to lock plunger in place....

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers