Burndy

Compression Terminals enable application flexibility.
Electrical Equipment & Systems

Compression Terminals enable application flexibility.

BREAK-AWAY(TM) HYLUG(TM) promotes field flexibility by allowing installer to convert 2-hole terminal to one-hole terminal to suit application at hand. With slotted second stud, terminals can conform to various bus bar dimensions. Additional flexibility is delivered via narrow tongue design, which allows terminal to fit into tight spaces. Additionally, products accommodate range of conductor...

Read More »
Burndy to Feature Enforcer Wrench, Kompressor Crimping Tool and Implo Connectors at ICUEE 2009
Construction Equipment and Supplies

Burndy to Feature Enforcer Wrench, Kompressor Crimping Tool and Implo Connectors at ICUEE 2009

BURNDY®, a leading manufacturer and provider of connector solutions to the industrial, energy, and application tooling industries, will showcase its ENFORCER(TM), model HIW716ENF hydraulic impact wrench, KOMPRESSOR(TM) hydraulic crimping tool and IMPLO(TM) connector products in booth #1647 at the International Construction and Utility Equipment Exposition (ICUEE), from October 6 -8 in...

Read More »
FCI-Burndy® Products Now Offers Range of Implo(TM) Implosive Connector Products
Architectural & Civil Engineering Products

FCI-Burndy® Products Now Offers Range of Implo(TM) Implosive Connector Products

New product offerings include Jumper Terminals, Full Tension Joints, Dead End Joints, and Repair Sleeves FCI-BURNDY® Products, a leading manufacturer and provider of connector and tooling solutions to the industrial, telecom, and energy industries, has added to its portfolio of products for Transmission Interconnect applications with the introduction of a range of IMPLO(TM) implosive...

Read More »
Fasteners & Hardware

Uninsulated Ferrules help in terminating and managing wires.

Manufactured from electrolytic copper, tin plated HYDENT(TM) uninsulated, bare ferrules are used to terminate stranded wires to form neat end terminations. RoHS compliant devices assist in terminating extra flexible fine stranded conductor. Installation tooling included are 4 tools with ergonomic handles, full cycle ratchet with release mechanism, and trapezoidal crimp profile.

Read More »
Hydraulic Impact Wrench delivers 515 lb-ft output torque.
Portable Tools

Hydraulic Impact Wrench delivers 515 lb-ft output torque.

Made of lightweight machined aluminum, ENFORCER(TM) Model HIW716ENF expedites hole drilling or hardware tightening and loosening. Tool is equipped with 7/16 in. Tri-ball quick chuck, which provides secure hold on standard 7/16 in. hex drive bits and accessories. With adjustable torque selector spool, wrench can be set at low and high setting of torque, or feather up gradually to desired torque...

Read More »
Hydraulic Crimpers deliver 6 tons of crimping force.
Machinery & Machining Tools

Hydraulic Crimpers deliver 6 tons of crimping force.

With flip-top style head, Models Y81KFT, Y81KFTMBH, and PATY81KFT-18V 4-POINT(TM) dieless hydraulic crimpers are suited for use on copper, aluminum, compressed, compact, stranded, solid, and flex conductors. Weighing 12 lb, hand-operated Model Y81KFT's head rotates 360Â-º relative to handles, while remote-operated Model Y81KFTMBH functions on 10,000 psi hydraulic pressure. Featuring...

Read More »
Battery Actuated Crimping Tool is hydraulically operated.
Portable Tools

Battery Actuated Crimping Tool is hydraulically operated.

Offering one-handed operation for advance, retract, and hold functions, BURNDY PATRIOT(TM) PAT644XT-18V suits contractor, utility, and telecommunications applications. Self-contained unit is ergonomically constructed and has hydraulic pump, transmission, and piston design. Along with crimping head design capable of 360° rotation for any-position operation, tool uses 2.6 AH high-capacity 18...

Read More »

Black Connector Line suits applications up to 600 V.

Suited for line splice, reducer, and tap applications, black BURNDY(TM) Insulated Multiple Tap Connector (UNITAP(TM)) is available in single-sided, double-sided, splice, and mountable versions. UV-rated aluminum connector is covered in black Plasitol, eliminating need for taping during installation while providing chemical resistance and abrasion protection. Pre-insulated, PVC-covered connector...

Read More »
Crimper offers one-handed operation for advance and retract.
Machinery & Machining Tools

Crimper offers one-handed operation for advance and retract.

Featuring 350° rotary head, PATRIOT(TM) IN-LINE(TM) crimping tool incorporates hydraulic pump generating 6 tons of crimping force. Unit provides consistent connection on range of copper and aluminum terminals and splices, overhead taps, full tension splices, and deadends. With 14.4 V Ni-MH battery and interchangeable jaws using W and X style dies in permanent D3 groove, crimper is supplied...

Read More »
Crimping Tool offers one-handed operation.
Machinery & Machining Tools

Crimping Tool offers one-handed operation.

Model PAT750XT-18V battery-actuated hydraulic crimping tool provides consistent connection on up to 750 kcmil copper and aluminum terminals and splices. Features include crimping head design that offers 360° rotation, high-speed hydraulic pump, 12-tons of output force, and audible pop-off crimp indicator. Operating on 2.6 AH high-capacity 18V Ni-MH battery, tool is suitable for contractor,...

Read More »
Compression Terminals enable application flexibility.
Electrical Equipment & Systems

Compression Terminals enable application flexibility.

BREAK-AWAY(TM) HYLUG(TM) promotes field flexibility by allowing installer to convert 2-hole terminal to one-hole terminal to suit application at hand. With slotted second stud, terminals can conform to various bus bar dimensions. Additional flexibility is delivered via narrow tongue design, which allows terminal to fit into tight spaces. Additionally, products accommodate range of conductor...

Read More »
Burndy to Feature Enforcer Wrench, Kompressor Crimping Tool and Implo Connectors at ICUEE 2009
Construction Equipment and Supplies

Burndy to Feature Enforcer Wrench, Kompressor Crimping Tool and Implo Connectors at ICUEE 2009

BURNDY®, a leading manufacturer and provider of connector solutions to the industrial, energy, and application tooling industries, will showcase its ENFORCER(TM), model HIW716ENF hydraulic impact wrench, KOMPRESSOR(TM) hydraulic crimping tool and IMPLO(TM) connector products in booth #1647 at the International Construction and Utility Equipment Exposition (ICUEE), from October 6 -8 in...

Read More »
FCI-Burndy® Products Now Offers Range of Implo(TM) Implosive Connector Products
Architectural & Civil Engineering Products

FCI-Burndy® Products Now Offers Range of Implo(TM) Implosive Connector Products

New product offerings include Jumper Terminals, Full Tension Joints, Dead End Joints, and Repair Sleeves FCI-BURNDY® Products, a leading manufacturer and provider of connector and tooling solutions to the industrial, telecom, and energy industries, has added to its portfolio of products for Transmission Interconnect applications with the introduction of a range of IMPLO(TM) implosive...

Read More »
Fasteners & Hardware

Uninsulated Ferrules help in terminating and managing wires.

Manufactured from electrolytic copper, tin plated HYDENT(TM) uninsulated, bare ferrules are used to terminate stranded wires to form neat end terminations. RoHS compliant devices assist in terminating extra flexible fine stranded conductor. Installation tooling included are 4 tools with ergonomic handles, full cycle ratchet with release mechanism, and trapezoidal crimp profile.

Read More »
Hydraulic Impact Wrench delivers 515 lb-ft output torque.
Portable Tools

Hydraulic Impact Wrench delivers 515 lb-ft output torque.

Made of lightweight machined aluminum, ENFORCER(TM) Model HIW716ENF expedites hole drilling or hardware tightening and loosening. Tool is equipped with 7/16 in. Tri-ball quick chuck, which provides secure hold on standard 7/16 in. hex drive bits and accessories. With adjustable torque selector spool, wrench can be set at low and high setting of torque, or feather up gradually to desired torque...

Read More »
Hydraulic Crimpers deliver 6 tons of crimping force.
Machinery & Machining Tools

Hydraulic Crimpers deliver 6 tons of crimping force.

With flip-top style head, Models Y81KFT, Y81KFTMBH, and PATY81KFT-18V 4-POINT(TM) dieless hydraulic crimpers are suited for use on copper, aluminum, compressed, compact, stranded, solid, and flex conductors. Weighing 12 lb, hand-operated Model Y81KFT's head rotates 360Â-º relative to handles, while remote-operated Model Y81KFTMBH functions on 10,000 psi hydraulic pressure. Featuring...

Read More »
Battery Actuated Crimping Tool is hydraulically operated.
Portable Tools

Battery Actuated Crimping Tool is hydraulically operated.

Offering one-handed operation for advance, retract, and hold functions, BURNDY PATRIOT(TM) PAT644XT-18V suits contractor, utility, and telecommunications applications. Self-contained unit is ergonomically constructed and has hydraulic pump, transmission, and piston design. Along with crimping head design capable of 360° rotation for any-position operation, tool uses 2.6 AH high-capacity 18...

Read More »

Black Connector Line suits applications up to 600 V.

Suited for line splice, reducer, and tap applications, black BURNDY(TM) Insulated Multiple Tap Connector (UNITAP(TM)) is available in single-sided, double-sided, splice, and mountable versions. UV-rated aluminum connector is covered in black Plasitol, eliminating need for taping during installation while providing chemical resistance and abrasion protection. Pre-insulated, PVC-covered connector...

Read More »
Crimper offers one-handed operation for advance and retract.
Machinery & Machining Tools

Crimper offers one-handed operation for advance and retract.

Featuring 350° rotary head, PATRIOT(TM) IN-LINE(TM) crimping tool incorporates hydraulic pump generating 6 tons of crimping force. Unit provides consistent connection on range of copper and aluminum terminals and splices, overhead taps, full tension splices, and deadends. With 14.4 V Ni-MH battery and interchangeable jaws using W and X style dies in permanent D3 groove, crimper is supplied...

Read More »
Crimping Tool offers one-handed operation.
Machinery & Machining Tools

Crimping Tool offers one-handed operation.

Model PAT750XT-18V battery-actuated hydraulic crimping tool provides consistent connection on up to 750 kcmil copper and aluminum terminals and splices. Features include crimping head design that offers 360° rotation, high-speed hydraulic pump, 12-tons of output force, and audible pop-off crimp indicator. Operating on 2.6 AH high-capacity 18V Ni-MH battery, tool is suitable for contractor,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers